• Fibers and Polymers
• /
• 제6권1호
• /
• pp.79-81
• /
• 2005

Fuzz on the fabrics, which is the fibers protruded from the fabric surface, is very important in view of appearance quality, since it causes unpleasant appearance on the fabrics and also leads to pilling which makes fabric appearance and soft­ness worse. However, fuzz on fabric surface is measured mostly by subjective methods (human vision) rather than objective methods. Thus, in this study, objective method using image analysis techniques has been developed for the measurement of fuzz on fabric surface. Fuzz on the fabric has also been ranked and rated by experts in order to see the reliability of the results obtained from the fuzz measurement. It was observed that correlation coefficient (r) between rating value and objective mea­surement value was 0.9 and this correlation coefficient value confirmed the reliability of this method.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.133-138
• /
• 2006

Singular value decomposition (SDV) approach is applied to the observability analysis of GPS/INS in this paper. A measure of observability for a subspace is introduced. It indicates the minimum size of perturbation in the information matrix that makes the subspace unobservable. It is shown that the measure has direct connections with observability of systems, error covariance, and singular structure of the information matrix. The observability measure given in this paper is applicable to the multi-input/multi-output time-varying systems. An example on the observability analysis of GPS/INS is given. The measure of observability is confirmed to be less sensitive to system model perturbation. It is also shown that the estimation error for the vertical component of gyro bias can be considered unobservable for small initial error covariance for a constant velocity horizontal motion.

• 한국정밀공학회지
• /
• 제12권3호
• /
• pp.82-91
• /
• 1995

The purpose of this research is to develop a new real-time process control system. In this paper, a theoretical method for acquiring the control limit of cutting process(cutting surface) according to the required value(geometric tolerance) based on geometrical relations was propsed. In particular, the three following points are amphasized. Firstly, the process control was based on the cutting process, and the control limit was determined from the analysis of geometrical relations. Secondly, AMGD(Actual Measured Geometrical Deviation) was used as a new substitute value in process analysis. Thirdly, fuzzy reasoning was introduced to get the control limit flexibility according to the variations in the required value and general consideration of each measurememnt items.

• Geomechanics and Engineering
• /
• 제29권5호
• /
• pp.487-496
• /
• 2022

Most of the pile's vertical static load tests in construction sites are the proof load tests, which is difficult to accurately estimate the ultimate bearing capacity and analyze the reliability of piles. Therefore, a reliability analysis method based on the proof load-settlement (Q-s) data is proposed in this study. In this proposed method, a simple ultimate limit state function based on the hyperbolic model is established, where the random variables of reliability analysis include the model factor of the ultimate bearing capacity and the fitting parameters of the hyperbolic model. The model factor M = R_uR / R_uP is calculated based on the available destructive Q-s data, where the real value of the ultimate bearing capacity (R_uR) is obtained by the complete destructive Q-s data; the predicted value of the ultimate bearing capacity (R_uP) is obtained by the proof Q-s data, a part of the available destructive Q-s data, that before the predetermined load determined by the pile test report. The results demonstrate that the proposed method can easy and effectively perform the reliability analysis based on the proof Q-s data.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2002년도 학술대회지
• /
• pp.527-530
• /
• 2002

국내 공동주택의 건축공사에서 주로 사용되고 있는 철근콘크리트 벽식구조에서 거푸집공사는 공기에 큰 영향을 미치는 공사이다. 건설선진국에 비해 긴 공정사이클을 갖고 있는 국내 골조공사의 실정을 감안한다면 거푸집공사에 대한 개선이 시급하다 볼 수 있다. 이에 대해 골조공사의 공기단축 및 원가절감을 위한 노력이 마감공사와 연계하여 이루어진다면 더욱 효과적일 것이므로, 공정개선의 노력은 골조공사와 마감공사의 연계를 통한 공종의 통합 및 낭비의 제거를 통해 이루어져야 할 것이다. 본 연구에서는 국내 건설현장의 사례조사를 통해 거푸집공사와 마감공사의 프로세스에서의 공정개선을 슬래브 골조공사를 중심으로 프로세스에 존재하는 비 가치창출작업을 파악하고 가치흐름분석을 통해 세분화되어 있는 공종을 통합하여 시간, 비용의 절감의 효과를 분석하였다. 또한 슬래브공사의 흐름생산을 유도하기 위한 공정개선 방안을 통하여 공기단축과 원가절감의 효과를 제시하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.332-335
• /
• 1995

A simple and effective method for improving Euclidean norm condition number for chemical processing system is presented. The singular value sensitivities of Freudenberg et al. (1982) is used to estimate the behavior of singular values of process transfer function matrix when design parameter is changed, then the condition number can be calculated straightforwardly. The method requires explicit dependencies of each transfer function matrix elements on design parameters. These dependencies can be obtained either by symbolic differentiation in the form of explicit function of design parameters, or by numerical perturbation studies for units with large and complicated models. Gerschgorin-type lower bound for minimum singular value is introduced to detect the large divergencies near singular point due to linearity of sensitivities. The case studies are performed to show the efficiency of the proposed method.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1157-1166
• /
• 2021

In this study, a numerical sensitivity analysis was performed to determine the fire suppression time for a large number of water mist nozzles in a large fire compartment. Fire simulations were performed using FDS (Fire dynamics simulator) 6.5.2 under the same condition as the test scenario 5 of the International Maritime Organization (IMO) 1165 test protocol. The sensitivities of input parameters including cell size, extinguishing coefficient (EC), droplets per second (DPS), and peak heat release rate (HRR) of fuel were investigated in terms of the normalized HRR and temperature distribution in the compartment. A new method of determining the fire suppression time using FDS simulation was developed, based on the concept of the cut-off time by cut-off value (COV) of the heat release rate per unit volume (HRRPUV) and the cooling time by the HRR cooling time criteria value (CTCV). In addition, a method was developed to determine the average EC value for the simulation input, using the cooling time and cut-off time.

• 한국건설관리학회논문집
• /
• 제7권1호
• /
• pp.128-137
• /
• 2006

최근 들어 설계VE의 역할 및 중요성은 날로 부각되고 있으므로 업무를 효율적으로 수행할 수 있는 방안에 관한 연구가 요구된다. 하지만 국내에는 설계VE가 도입 된지 얼마 되지 않아 연구 활동이 미진한 측면이 많다. 이에 본 연구에서는 설계VE 업무의 효율화를 위한 수행 기준을 제시하고자 한다. 그 방법은 설계VE 업무 수행과정에서 발생되고 있는 다수의 문제 요인을 도출하는 것으로 1차적으로 VE 전문가 교육의 팀 프로젝트 사례를 분석하고, 2차적으로 교육을 이수한 각 분야별 전문가를 대상으로 팀 프로젝트 진행과정에서 발생된 문제 요인을 설문조사를 통해 분석하는 것이다. 그리고 분석된 내용을 기반으로 설계VE 업무 효율화를 위한 중점 관리 요인을 제시하고 그에 따른 업무 효율 최적화 방안 및 절차를 제안하고자 한다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.159-166
• /
• 2007

가치공학(Value Engineering, 이하 VE라 함)은 생산성향상기법으로 알려져 왔으나, 건설 분야에서도 적용되어 지난 십여 년 이상의 기간 동안 선진외국뿐 아니라 국내의 여러 사례에서 이미 그 효과가 입증된 우수한 관리기법이다. 국내 VE는 지난 2005년 건설기술관리법(이하 '건기법') 시행령('설계의 경제성 등 검토'-건기법시행령 제 38조의 13)이 개정되어 총공사비가 100억원 이상인 건설공사로 확대 적용되고 있는 실정이다. 그러나 국내 시장에서의 VE는 그 이론과 적용에 있어 여러 차이를 보여 온 것이 사실이며, 이로 인해 VE의 확대와 보급에 걸림돌로 작용해 온 것도 부인할 수 없는 현실이다. 따라서 본 연구에서는 최근 설계VE 수행사례를 통하여, 그 문제점과 원인을 다각적으로 검토하고, 이에 대한 개선방안을 제시하여 설계VE의 성공적인 국내정착에 일조 하고자 한다.

• ETRI Journal
• /
• 제40권5호
• /
• pp.634-642
• /
• 2018

Projection spectral analysis is investigated and refined in this paper, in order to unify principal component analysis and independent component analysis. Singular value decomposition and spectral theorems are applied to nonsymmetric correlation or covariance matrices with multiplicities or singularities, where projections and nilpotents are obtained. Therefore, the suggested approach not only utilizes a sum-product of orthogonal projection operators and real distinct eigenvalues for squared singular values, but also reduces the dimension of correlation or covariance if there are multiple zero eigenvalues. Moreover, incremental learning strategies of projection spectral analysis are also suggested to improve the performance.