• Journal of the Korea Society for Simulation
• /
• v.19 no.1
• /
• pp.41-51
• /
• 2010

A control system has been being developed by korean engineers for 500MW korean standard type fossil power plant with the advent of retrofit of old control system. Simulators have been used for digital I&C system pre-tests and validation tests in nuclear power plants. In this paper, the power plant simulator for control system V&V was developed in order to verify the developed control system prior to application to a power plant. The control models were developed using plant control system data, translator programs, and vendor manuals. The developed simulator was verified by steady-state test, load swing test, transient test and so on.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8753-8759
• /
• 2015

Establishment of analysis procedures and validated performance measurements for generator output is required to maintain stable management of generator output in turbine power generation cycle. We developed turbine expansion model and measurement validation model for the performance calculation of generator using turbine output based on ASME (American Society of Mechanical Engineers) PTC (Performance Test Code). We also developed verification model for uncertain measurement data related to the turbine and generator output. Although the model in previous researches was developed using artificial neural network and kernel regression, the verification model in this paper was based on algorithms through Support Vector Machine (SVM) model to overcome the problems of unmeasured data. The selection procedures of related variables and data window for verification learning was also developed. The model reveals suitability in the estimation procss as the learning error was in the range of about 1%. The learning model can provide validated estimations for corrective performance analysis of turbine cycle output using the predictions of measurement data loss.

• Journal of Korean Society for Quality Management
• /
• v.39 no.2
• /
• pp.313-319
• /
• 2011

In design verification and process validation stages, reliability demonstration tests(RDT's) are common practice in industry, A new two-stage RDT that is known to be more efficient than a corresponding single-stage one in terms of expected test duration for Weibull distribution is proposed. Zero or one failure two-stage plans to minimize expected test duration under Type I and hybrid censoring subject to satisfying consumer's risk at a specified reliability target are developed and a numerical example is provided to illustrate the proposed two-stage RDT plans and compared with other one- and two-stage plans.

• Journal of Korean Society of Archives and Records Management
• /
• v.21 no.3
• /
• pp.99-118
• /
• 2021

As the importance of data grows because of the advent of the next industrial revolution, foreign countries are pushing for long-term data preservation technology research. On the other hand, in Korea, administrative information data sets have been legislated as records management areas without specific long-term preservation measures. As a response, this study conducted basic, cross-validation tests on the Software Independent Archiving of Relational Database (SIARD), which was proposed as an administrative information data set preservation format in several prior works. First, the underlying verification test focuses on deriving the data, structure, and functionality of the data set that SIARD can preserve. The second cross-validation test aimed at verifying the interoperability of SIARD independent of the DBMS class. In addition, two verification tests have confirmed the SIARD feature delivery range. Consequently, the differences between the feature types specified in the SIARD 2.0 standard and those provided by the actual SIARD Suite have been derived. Based on verification test results, we are proposing a development plan to broaden SIARD functionality and set a direction to efficiently enhance SIARD for local situations.

• Journal of Information Technology Services
• /
• v.11 no.1
• /
• pp.239-246
• /
• 2012

The user increases around the WiBro and in which the mobile broad band service is the wireless internet base technology HSDPA, that is the cellular phone foundation technique, and moreover the issue about the user effective quality guarantee emerges but the quality control of the wireless network is the incomplete actual condition. Therefore, the reliability verification according to the development of the system for the performance measure for the continued wireless data service and it and evaluation are needed for the quality control. In this paper, the wireless data service quality measurement system was implemented with the design. The same test environment as the existing network performance measurement program was built for the reliability verification of the embodied device for measuring quality and evaluation and the cost performance was performed. It could confirm that design and embodied wireless data service quality measurement system operated accurately in this paper through the quality measure result value analysis.

• Nuclear Engineering and Technology
• /
• v.33 no.1
• /
• pp.34-45
• /
• 2001

We have needs to develop a performance analysis system that can be used in domestic nuclear power plants to determine performance status of turbine cycle. We developed new NOPAS system to aid performance analysis of turbine cycle . Procedures of performance calculation are improved using several adaptations from standard calculation algorithms based on ASME (American Society of Mechanical Engineers) PTC (Performance Test Code). Robustness in the performance analysis is increased by verification & validation scheme for measured input data. The system also provides useful aids for performance analysis such as graphic heat balance of turbine cycle and components, turbine expansion lines, automatic generation of analysis reports.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.3 s.234
• /
• pp.409-416
• /
• 2005

We need to develop a on-line thermal performance analysis system for nuclear power plant to determine performance status and heat rate of turbine cycle. We have developed PERUPS(PERformance Upgrade System) to aid the effective performance analysis of turbine cycle. Procedures of performance calculation are improved using several adaptations from standard calculation algorithms based on PTC(Performance Test Code). Robustness in the on-line performance analysis is increased by verification & validation scheme for measured input data. The system also provides useful web interfaces for performance analysis such as graphic heat balance of turbine cycle and components, turbine expansion lines, automatic generation of analysis report. The system was successfully applied for YongGwang nuclear plant unit #3,4.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.308-311
• /
• 2004

This paper describes design, implementation and functional test of on-board flight analog video system. Video system is the part of the telemetry system as a means of providing flight vehicle's image data. Adopting analog video transmission technique, we could design and test the system in a short time and implement the prototype model with simpler circuits. As results of the functional test, we have made the verification and validation of two cameras' switching in time, and frequency modulation and demodulation of NTSC color signals successfully.

• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.50-57
• /
• 2017

Recently, safety-critical aviation system development programs promoted domestically have been terminated in the middle stage or they have not been put to practical use at the final stage. The program failure may be caused by various factors, but this study focused on imperfect test and evaluation(T&E) procedures. In general, T&E process of a safety-critical system must be distributed throughout the entire life-cycle of the system, have a continuity in phases, and can be implemented in a variety of ways depending on the maturity of the system development and acquisition strategy. This paper aims to present a new strategy by analyzing the domestic and overseas T&E processes to reduce the risk of domestic safety-critical CNS/ATM system development program and increase the success rate of program. First, we discuss the verification and validation techniques for safety-critical systems, analyze the T&E procedures of advanced institutes and the domestic situation, and then compare the domestic and overseas T&E processes to complement the imperfect testing procedure.

• Journal of Applied Reliability
• /
• v.16 no.3
• /
• pp.216-223
• /
• 2016

Purpose: This paper suggests the procedure to enhance the reliability of the software of the medical device that is to cure, treat, diagnose, and prevent a disease or an abnormal health conditions. Methods: After test requirements are classified by the software requirements specification for safety and backgrounds, reliability assessment methods are suggested. Results: Verification and validation for function and safety can be performed whether the medical device software are implemented as intended. Conclusion: Procedure on the static analysis, unit test, integration test, and system test are provided for the medical device software.