• 한국축산식품학회지
• /
• 제39권1호
• /
• pp.54-64
• /
• 2019

Wet and dry aging methods were applied to improve the quality of three different beef cuts (butt, rump, and sirloin) from Hanwoo cows (quality grade 2, approximately 50-mon-old). After 28 d of wet aging (vacuum packaged; temperature, $2{\pm}1^{\circ}C$) and dry aging (air velocity, 2-7 m/s; temperature, $1{\pm}1^{\circ}C$; humidity, $85{\pm}10%$), proximate composition, cooking loss, water holding capacity, shear force, color, nucleotides content, and sensory properties were compared with a non-aged control (2 d postmortem). Both wet and dry aging significantly increased the water holding capacity of the butt cuts. Dry aging in all beef cuts induced lower cooking loss than that in wet-aged cuts. Shear force of all beef cuts was decreased after both wet and dry aging and CIE $L^*$, $a^*$, and $b^*$ color values in butt and sirloin cuts were higher in both wet and dry aging (p<0.05) groups than those in the non-aged control. Regardless of the aging method used, inosine-5'-monophosphate content among beef cuts was the same. The sensory panel scored significantly higher values in tenderness, flavor, and overall acceptability for dry-aged beef regardless of the beef cuts tested compared to non- and wet-aged cuts. In addition, dry-aged beef resulted in similar overall acceptability among the different beef cuts, whereas that in wet-aged meat was significantly different by different beef cuts. In conclusion, both wet and dry aging improved the quality of different beef cuts; however, dry aging was more suitable for improving the quality of less preferred beef cuts.

• 한국진공학회지
• /
• 제17권3호
• /
• pp.175-182
• /
• 2008

반도체 장비용 진공코팅부품의 공정영향에 의한 내부식 성능 평가방법을 연구개발 하였다. 평가기준을 마련하기 위해 반도체 공정에서 교체된 코팅부품의 특성을 분석 평가하였다. 코팅부품의 성능을 정량적으로 측정하기 위하여 부품의 코팅막으로 많이 사용되고 있는 $Al_2O_3$ 막의 건식부식실험을 실시하였고 표면모폴로지, 누설전류 및 내전압측정 등을 수행하였다. 실험결과 건식부식처리 후 샘플의 누설전류량이 증가하였고, 절연내력이 크게 줄어 전기적 특성이 하향된 결과를 보였으며, 표면 모폴로지의 경우 부식시간 증가에 따라 표면 손상정도가 증가하는 것을 확인 할 수 있었다. 부식공정에 의한 이들 특성 값 변화를 이용하여 코팅부품의 공정영향에 의한 성능평가 방법을 개발할 수 있었다.

• ETRI Journal
• /
• 제38권4호
• /
• pp.685-694
• /
• 2016

A surface micromachined piezoresistive pressure sensor with a novel internal substrate vacuum cavity was developed. The proposed internal substrate vacuum cavity is formed by selectively etching the silicon substrate under the sensing diaphragm. For the proposed cavity, a new fabrication process including a cavity side-wall formation, dry isotropic cavity etching, and cavity vacuum sealing was developed that is fully CMOS-compatible, low in cost, and reliable. The sensitivity of the fabricated pressure sensors is 2.80 mV/V/bar and 3.46 mV/V/bar for a rectangular and circular diaphragm, respectively, and the linearity is 0.39% and 0.16% for these two diaphragms. The temperature coefficient of the resistances of the polysilicon piezoresistor is 0.003% to 0.005% per degree of Celsius according to the sensor design. The temperature coefficient of the offset voltage at 1 atm is 0.0019 mV and 0.0051 mV per degree of Celsius for a rectangular and circular diaphragm, respectively. The measurement results demonstrate the feasibility of the proposed pressure sensor as a highly sensitive circuit-integrated pressure sensor.

• 설비공학논문집
• /
• 제26권9호
• /
• pp.441-446
• /
• 2014

In Jeju province, the Citrus is widely spread crop which is the most popular fruit on the island. When the quality of a Citrus is not in a good condition or when its size exceeds or is lower than the set criteria, it is discarded as a waste. In this study, a drying machine for waste Citrus has been developed with 2.6 GHz microwave energy supply to the Citrus at vacuum environment. The vacuum environment of the drying chamber was maintained to reduce the energy supply to the Citrus by lowering the evaporating temperature of the water. The experiment was conducted with variation of the vacuum pressure, interior temperature of the drying chamber, and operating time of the microwave. As a result, the effect of the temperature was shown to be higher than the other two control methods, and it showed with 0.305 g/W evaporation efficiency.

• Food Science and Biotechnology
• /
• 제14권5호
• /
• pp.661-666
• /
• 2005

The specific objectives of this study were to dry yam chips using microwave vacuum drying, freeze drying and hot air drying, then to coat the dried yam chips with ascorbic acid cocrystallized sucrose, and finally to compare the quality of yam chip snack foods with respect to drying and coating characteristics. The microwave vacuum dried sample showed the highest drying rates and much less surface damage than the hot air dried one did. The shape and color of the microwave vacuum dried/coated sample were allocated between those of the freeze dried/coated sample and the hot air dried/coated sample. The freeze dried/coated sample scored excessively low in organoleptic hardness and chewiness to be suitable as a snack. The hot air dried/coated sample was too deep in color, wrinkled, excessively high in organoleptic hardness and chewiness, and excessively low in mouthfeeling. Therefore, the microwave vacuum dried/coated sample presented the best overall attributes as a snack, with respect to organoleptic characteristics, shape, color, and drying rates.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.289-290
• /
• 2008

The purpose of this paper is to analyze AC Breakdown of solid/air composite insulation depending on the thickness and the pressure of dry air for eco-friendly insulation. SF6 gas has been widely used in electric equipment as gas insulation because of high dielectric strength and arc extinguishing performance. However, because SF6 gas is one of the green house effect gases, alternative insulation such as SF6 mixture, extremely low temperature gas, vacuum, liquid and solid insulating are being investigated.

• 한국수산과학회지
• /
• 제10권3호
• /
• pp.145-149
• /
• 1977

Thermal resistance of dried bacterial spores against dry heat was determined. Spare suspensions of Bacillus subtilis var. niger ATCC 9372, Bacillus stearothermophilus Oxoid Code BR 23 and Clostridium sporogenes ATCC 19404 were located on aluminium strips, dried in electric oven under vacuum at room temperature for 10 minutes. The aluminium strips were laid in the middle of gas flow (hot air and superheated steam) with the velocity of 6 m/sec and heated at $120^{\circ}C$ for 180 seconds. The calculated D-values showed that there were no remarkable differences in the heat resistance of bacterial spares between $R.H.\leqq0.012$ and R. H.=0.51. Furthermore the thermal resistance of B. subtilis spores to dry heat was greater than that of B. stearothermophilus.

• Nuclear Engineering and Technology
• /
• 제50권2호
• /
• pp.306-312
• /
• 2018

There is an increasing need in the United States and around the world to move used nuclear fuel from wet storage in fuel pools to dry storage in casks stored at independent spent fuel storage installations or interim storage sites. Under normal conditions, the Nuclear Regulatory Commission limits cladding temperature to $400^{\circ}C$ for high-burnup (>45 GWd/mtU) fuel, with higher temperatures allowed for low-burnup fuel. An analysis was conducted with FRAPCON-4.0 on three modern fuel designs with three representative used nuclear fuel storage temperature profiles that peaked at $400^{\circ}C$. Results were representative of the majority of US light water reactor fuel. They conservatively showed that hoop stress remains below 90 MPa at the licensing temperature limit. Results also show that the limiting case for hoop stress may not be at the highest rod internal pressure in all cases but will be related to the axial temperature and oxidation profiles of the rods at the end of life and in storage.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.145-146
• /
• 2002

Tribological properties of co-sputtered Molybdenum disulfide $(MoS_2)/Carbon\;(C)$ films were studied and compared with those of sputtered $MoS_2$ films. Friction tests were carried out using pin-on-disk friction testers to evluated their friction and wear behaviors in a vacuum ($10^{-5}Pa$), air and humid air of 30, 50, 80% RH. $MoS_2/C$ (14%) composite films exhibited about 9 times longer wear life in a vacuum and about 6 times longer wear life in dry air than $MoS_2$ films did. They also showed stable low friction coefficient of about 0.02 in a vacuum. In humid air, however, $MoS_2/C$ composite films hardly showed good tribological properties.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1994년도 제7회 학술발표회 및 한·일 CVD 심포지움 논문개요집
• /
• pp.158.1-158
• /
• 1994

Totally dry lithography is studying with using plasma polymerized resist for almost 15 years. Recently organo-silicon ITlOnOmer was proposed as a new resist. When the plasma polymerized resist was irradiated through a mask in oxygen gas, the resist was oxidized and a fine pattern of submicron was successfully developed by $Cl_2$ gas plasma.