• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.147-150
• /
• 1999

A T-shaped microstripline-fed printed slot array antenna having wide bandwidth, high gain, and narrow bandwidth is presented in this paper. The proposed antenna is analyzed by using the transmission line model method. We fabricated 4$\times$1 microstrip slot array antenna and measured its return loss and radiation pattern. The maximum bandwidth of this array antenna is from 1.43 ㎓ to 2.60 ㎓, which is 58.1% for the VSWR $\leq$ 2.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.621-624
• /
• 2003

In this paper, two Cascode Low Noise Variable Gain Amplifiers are proposed for wide dynamic range and constant Noise Figure for frequency range of 2.4GHz. Designed Variable Gain Low Noise Amplifier are for Wireless Local Area Network (WLAN) applications. A gain is higher than 17dB and the noise figure is approximately 1.3dB and the input VSWR is better than 2:1.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.302-305
• /
• 2003

In this paper, a feedline which is a shape of a fork is designed to improve a bandwidth of the microstrip slot antenna. To determine design parameters of the feedline, the characteristics of the microstrip slot antenna is analyzed by changing design parameters of the feedline. The microstrip slot antenna with the feedline of a shape of a fork has a wide band, from 1.7 GHz to 6.1 GHz for VSWR $\leq$2.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.354-357
• /
• 2003

The low noise and balanced amlifier has been designed by using PBG. Usually balanced LNAis used to matching the input and output mismatching that caused by matching the low noise matching point. And the PBG supresses the harmoincs. This paper proposed balanced LNA by using PBG. And this configuration improve the performance - noise figure, VSWR.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.136-139
• /
• 2001

In this paper, we propese a novel wide band printed monopole antenna called the staircase bow-tie monopole antenna (SBMA). We apply an extraordinarr method for an impedance matching to conventional bow-tie monopoles. So we get the SBMA with a very wide band. Our antenna is smaller than a quarter wavelength in size but provides a 2:1 VSWR bandwidth of about 77.8%. An antenna gain and a radiation pattern are about 1.7dBi and omni-directional at 1.7 GHz, respeotively.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.106-110
• /
• 2001

In this paper, a broadband sleeve monopole antenna using a loading coil in sleeve is proposed. The antenna of the proposed structure has the same of the single sleeve monopole antenna, except for using the coil instead of the inner conductor in sleeve. As a result, it is found that the bandwidth is 1.239～2.154 GHz(above 53.9%) for S$\sub$11/=-10dB(VSWR<2), and the antenna impedance is good for a communication system and feeder which the impedance has 50$\Omega$.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.115-118
• /
• 2001

마이크로 스트립을 이용하여 셀룰러(824-894 MHz) 이통통신용 송수신 안테나를 설계 및 제작하였다. 이때 넓은 대역폭을 얻기 위하여 개구면 결합형(aperture-coupled) 안테나를 설계하였으며 사용된 기판은 2층의 FR-4 ($\varepsilon$$_{r}$ =4.7) 기판과 공기층을 합한 3단으로 이루어져 있다. 안테나 특성파악을 위한 스트립의 전류분포와 슬롯의 자류분포 해석은 전송선로 모델법을 적용하였고 제작된 안테나는 VSWR 1.5:1 이하의 높은 복사 특성을 얻으므로써 좁은 공간에서 편리하게 설치하여 쓸 수 있는 우수한 안테나임을 확인하였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.11
• /
• pp.1668-1670
• /
• 2012

In this paper, a satellite array antenna operates at 12.2GHz~12.75GHz was designed and fabricated. The lowest height and high gain electrical beam tilt was obtained by applying backed slot and sub-reflector widening the distance between the patch and the GND. The simulation and measurement showed good agreements, the electrical beam tilt was $10^{\circ}$, the gain was 26.5dBi, the VSWR was less than 3:1 and the return loss was less than -15dB.

• Journal of the Korea Computer Industry Society
• /
• v.9 no.5
• /
• pp.217-222
• /
• 2008

The characteristics of UHF antenna with microstrip structure was studied. Design parameters as center frequency, band width, and VSWR by slot length, stub was analyzed by HFSS simulator. UHF antenna with microstrip structure was fabricated using FR4_epoxy substrate of 4.4 dielectric constant.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.384-387
• /
• 2006

본 논문에서는 GPS용 Compact Truncated 패치 안테나를 제작 및 설계하였다. 또한 각모서리에 슬롯을 이용하여 소형화를 유도하였다. 중심주파수는 1.575GHz를 사용하였으며, 제작된 안테나는 VSWR 2:1 이하에서 약 50MHz의 대역폭을 보였으며, 1.575MHz에서 축비 2.7dB인 결과를 얻었다.