• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.2
• /
• pp.61-67
• /
• 1998

Dynamic stability in rotation of the head drum of digital VCR is very important due to the nature of high rotation speed and small angular inertia. Therefore special considerations on reducing the unbalance and assuring the stability are required the design and manufacturing process. In this paper, newly developed digital head drum is introduced. And advanced methods in analyzing and reducing the unbalance is suggested. LDV(Laser Doppler Vibrometer) was used as a measurement system verifying our modeling and new method for balancing. Experiments show that the theoretical data estimated by modeling of shaft bending caused by unbalance mass and the measured data are almost identical. The deflection was reduced to 30％ by applying the suggested balancing method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.10
• /
• pp.3095-3104
• /
• 1996

The tribological characteristics of TIN and DLC coated VCR drums were compared to conventional aluminum drums using a custom built accelerated testing set-up under varying temperature and humidity. It is found that the coated drums exhibit superior frictional properties at elevated temperature and high humidity compared to bare aluminum drum. Futhermore, the coated drums maintained their initial surface conditions over a wider range of temperature and humidity variation. As for the damage incurred to the tape, DLC coated drum was the most favorable of the three types of drums.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.5 no.1
• /
• pp.25-32
• /
• 1995

In this paper, the FLVSC (Fuzzy Logic Variable Structure controller), of which control rules are extracted from the concepts of the VSC(Variable Structure control) is proposed and diesgned for drum motor(BLDC motor) in home VCR. The FLC (Fuzzy Logic Controller) based on linguistic rules has the advantages of not needing of some exact mathermatical model for plant to be controlled. The proposed method has the characteristics which are viewed in conventional VSC, e.g. insensitivity to a class of distrubances, parameter variations and uncertainites in a sliding mode. In addition, the method has the properties of the FLC-noise rejection capability etc. The computer simulation and experiment using DSP(TMS320C30) have been carried out for the servo control of VCR drum motor to show the usefulness of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.457-462
• /
• 1991

Recently, digital techniques have been applied to servo systems of the home VCR, which result in high accuracy, high stability and a small number of parts required. The servo systems are now becoming more compex because the latest home VCRs are stringly required to have many functions. Given these circumstances, software servo concepts were introduced to the VCR servo system with microprocessor. But there are some difficulties in the conventional digital PID controller, eg. caculating the exact gains or dynamics. In this paper, we introduce FLC(Fuzzy Logic Controller) to the speed/phase control for VCR drum motor. To show the usefulness of the proposed controller, some studies are discussed by simulation and experiment.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1996.05a
• /
• pp.36-40
• /
• 1996

A numerical analysis is performed about the static and dynamic characteristics of the oil-lubricated herringbone-grooved journal bearing which has circular groove profile. Some tests of jitter and W/F measurements are carried out to verify the performance of the newly designed drum assembly.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.333-338
• /
• 2000

This paper presents an experimental study and numerical thermal deformation analysis in the home appliance, Video Cassette Recorder. Analyzing the change axial force of a set screw according to the change of temperature in the drum assembly, we can determine the initial torque in tightening set screw. The torque will have the preload boss not be separated from the bearing. Also we conduct the fundamental experiment to constitute a boundary condition of the numerical analysis. With the result of this study, we can change the material of preload boss, copper, for aluminum.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.849-851
• /
• 1995

Magnetic heads on vcr drum are adjusted for protrusion, rotational angle, setting angle between two symmetrically positioned heads and height difference. Developed adjustment system covered assembly spec., namely ${\pm}2{\mu}m$ and ${\pm}30{\mu}m$ in rotational angle by using the image processing to determine head positions and S/W algorithm to compensate mechanical errors.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.6
• /
• pp.995-1001
• /
• 1997

In this paper, a new positioning method with incoherence of white light is described and practically implemented to attach VCR heads on a drum very accurately. This method utilizes the Michelson Interferometer which uses white light with short coherence length as the light source to generate interference fringes only in case the optical path difference is shorter than about 2.mu.m. The course position of VCR heads and the fine are determined by appearance and visibility of interference fringes, respectively. The appearance are detected by an image processing technique using FFT(Fast Fourier Transform).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1990.10a
• /
• pp.181-185
• /
• 1990

In the present study, the following factors are analyzed systematically using the theoretical and experimental methods, which have the significant influence on the quality of VTR tape path system in order to develope the high performance and quality in VTR mechanism: 1) Vibration characteristics of the deck including the tape path sytem, 2) Modeling the global tape path, 3) Torsional vibration of the VTR drum. 4) Capstan system, 5) Tension bar, 6) Stick-slip phenomenon of the running tape.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.130-130
• /
• 2000

타이타늄(CP Ti)과 타？늄합금은 인체의 골격을 구성하고 있는 물질과 가장 흡사한 물리적 성질과 우수한 생체적합성으로 인해 임플란트용 재료로 많이 사용되고 있으며, 최근에 인공관절이나 치근으로의 사용이 증가하고 있다. 그러나 교합면에서의 취약한 마모특성으로 인해 wear debris에 의한 골 흡수 및 이완 등을 야기하는 문제점으로, 이의 개선에 관한 연구가 활발히 진행되어 왔다. 다이아몬드상 카본 (Diamond-Like-Carbon) 박막은, 다이아몬드와 유사한 높은 경도, 내마모성 그리고 화학적 안정성 등의 매우 우수한 물리화학적 특성을 가지고 있는 박막재료로 고체 윤활박막으로서 hard disk나 VCR head drum의 보호막, 우주항공기의 bearing 재료코팅 등으로의 적용이 최근에 급격히 증가하고 있다. 본 연구에서는 이와 같은 특성을 지닌 다이아몬드상 카본 박막의 생체재료로의 적용을 위해, CP Ti과 Ti-6Al-4V에 13.56MHz를 사용하는 r.f PACVD법으로 DLC를 증착하여 생체적합적 특성을 조사하였다. C6H6 가스를 사용하여 1$\mu\textrm{m}$의 두께로 DLC 박막을 증착하였으며, 기판과의 밀찰력 향상을 위해 Si을 증간층으로 합성하였다. 마모특성은 pin-on-disk type wear tester을 사용하였으며 직경 5mm의 ruby ball로 실험을 수행하였다.