• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.72-73
• /
• 2013

In this paper, types of ready mixed concrete in construction site supported by different company has been researched. The practicability of the commercial available ready mixed concrete has been tested, and the standard deviation has been modified from Vc=Vo+3б to Vc=Vo+1.73б. Unnecessary premium rate has been cut and economical efficiency of the ready mixed concrete has been improved.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.4
• /
• pp.695-700
• /
• 1996

In other to produce vinegar using maesil, acetic acid bacteria were selected from several conventional vinegars, and total 16 acetic acid producing bacterial strains were isolated. Among the isolated strains, a strain was selected from the medium with maesil juice which showed the highest productivity of acetic acid. The strain was identified as Acetobacter sp. VC-2 and it's cultural characteristics were also investigated in the batch shake flasks. The medium containing 2% acetic acid, 6% ethanol, 0.2% glucose, 0.3% yeast extract and 30% maesil juice was suitable for acetic acid production with Acetobacter sp. VC-2 at 3$0^{\circ}C$. The acidity of culture medium was reached to 6.5% after 8 days shaking cultivation at 3$0^{\circ}C$. The main components of organic acids were acetic, citric, malic and tartaric acid, and they were 4.28, 1.38, 0.48 and 0.30%, respectively.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.303-308
• /
• 2018

Silicon/Carbon (Si/C) composite as anode materials for lithium-ion batteries was synthesized to find the effect of binders and an electrolyte additive. Si/C composites were prepared by two step method, including magnesiothermic reduction of SBA-15 (Santa Barbara Amorphous material No. 15) and carbonization of phenol resin. The electrochemical performances of Si/C composites were investigated by charge/discharge, cyclic voltammetry and impedance tests. The anode electrode of Si/C composite with PAA binder appeared better capacity (1,899 mAh/g) and the capacity retention ratio (92%) than that of other composition coin cells during 40 cycles. Then, Vinylene carbonate (VC) was tested as an electrolyte additive. The influence of this additive on the behavior of Si/C anodes was very positive (3,049 mAh/g), since the VC additive is formed passivation films on Si/C surfaces and suppresses irreversible changes.

• Physical Therapy Rehabilitation Science
• /
• v.10 no.1
• /
• pp.40-47
• /
• 2021

Objective: The purpose of this study is to prove the reliability and validity of the Power breath K5 and to compare it with pony FX. Power breathe K5 is one type of device can assess automatically Maximum inspiratory pressure (MIP), Peak inspiratory pressure, Peak inspiratory flow (PIF). Design: Cross-sectional study. Methods: Thirty-five COPD patients participated in the test to investigate for the intra relater reliability and concurrent validity. The tests MIP, Vital capacity (VC), PIF were measured by Powerbreathe K5 and Pony Fx. Data was analyzed by intraclass correlation reliability (ICC) value and a standard error of measurement and Bland-Altman plots for reliability and pearson correlation for validity. Results: Intra rater reliability of the Powerbreathe K5 was very high at MIP (ICC=0.977 95%CI 0.956~0.989, SEM=8.665, MDC=0.295), PIF (ICC=0.966 95%CI 0.933~0.93, SEM=8.665, MDC=0.295), VC (ICC=0.949 95CI 0.902~0.974, SEM=0.042, MDC=0.116). The Powerbreath K5 was significant correlation compared with Pony Fx in assessment for MIP (r=0.971, p<0.05) and vital capacity (r=0.534, p<0.05). Conclusion: In this study, We investigated the clinical usefulness of the Powerbreath K5 in evaulating the MIP, VC and PIF with COPD patients with high reliability and validity.

• Journal of Korean Institute of Industrial Engineers
• /
• v.17 no.1
• /
• pp.9-15
• /
• 1991

This paper suggests a method to construct nonparametric edge blend surfaces between nonparametric (base) surfaces. The blend surface satisfy $VC^1$ condition for the base surfaces, and its fullness can be controlled easily. Several illustrative examples are shown.

• Korean Journal of Materials Research
• /
• v.2 no.1
• /
• pp.65-75
• /
• 1992

0.4wt%C steel added with V and/or Nb were forged and followed by air cooling. The structure-property relationships were examined and multiple regression analysis was conducted to quantify the magnitudes of effects of microalloying elements on the properties of the steels. All material's tensile strength are greater than $70kg/\textrm{mm}^2$, so they are equal to or superior to Q/T material's(S45C). Their impact energies are less than 40J, so they are 50% of Q/T material's. Increasing the content of V from 0.10 to 0.15 wt% had brought improvement in UTS about 20% but with some sacrifice of impact energy. These were the results from the precipitation strengthening by fine dispersion of VC in ferrite, increment of pearlite volume fraction and decrement of pearlite interlamellar spacings. However, increasing the content of Nb from 0.05 to 0.l0wt % slightly improved UTS and impact energy. NbC precipitates were more effective in suppression of austenite grain coarsening than VC precipitates. Combined additions of V+Nb were more effective to bring impact toughness than sole addition. Optimum combination of strength and toughness was accomplished wish 0.4C-1. 19Mn-0.05S-0.12V-0.07Nb steel.

• Journal of Chest Surgery
• /
• v.27 no.7
• /
• pp.587-597
• /
• 1994

To study the recovery pattern of pulmonary function after decortication, the author performed serial pulmonary function tests using spirometry before and at lst., 3rd., 4th. week, lst., 3rd., 6th. month and 1st. year in 36 patients who underwent decortication from January 1989 to September 1991 at the Department of Thoracic and Cardiovascular Surgery, Pusan National University Hospital, Pusan, Korea. Patients were divided into 3 groups by the degree of compression of lung parenchyme. Group I was classified below 20%, Group II between 21 to 40%, Group III above 41%. Their serial changes of pulmonary function test were compared. The obtained results were as follows; 1. Maximal voluntary ventilation was recovered in 1st post perative week and even greater improvement was noted in group III in which ratio to 44 % of the preoperative value. 2. Vital capacity reached nearly to preoperative values in 3rd postoperative week and had increased much further to 26 % above the preoperative figure in group II. 3. Forced expiratory volume in 1 second returned rather slowly in 3rd-4th postoperative week and the mean VC was improved more higher in group II than the other groups following decorti cation. 4. There was an greatest improvement over all tests[MW, VC, FEV1] in 2nd decade which ratios to preoperative value were 34, 25 and 22 % respectively.

• Journal of the Korean Electrochemical Society
• /
• v.19 no.3
• /
• pp.69-79
• /
• 2016

Lithium ion battery with high energy density is expanding its application area to electric automobile and electricity storage field beyond existing portable electric devices. Such expansion of an application field is demanding higher characteristic and stable long life characteristic of an anode material, the natural graphite that became commercialized in lithium ion battery. This thesis produced cathode by using natural graphite anode material, analyzed creation of the cathode SEI film created due to initial reaction by using electrolyte additives, VC (vinylene carbonate), VEC (vinyl ethylene carbonate), and FEC (fluoroethylene carbonate), and considered correlation with the accompanying electrochemical transformation. This study compared and analyzed the SEI film variation of natural graphite cathode according to the electrolyte additive with SEI that is formed at the time of initial filling and cathode of $60^{\circ}C$ life characteristic. At the time of initial filling, the profile showed changes due to the SEI formation, and SEI was formed in No-Additive in approximately 0.9 V through EVS, but for VC, VEC, and FEC, the formation reaction was created above 1 V. In $60^{\circ}C$ lifespan characteristic evaluation, the initial efficiency was highest in No-Additive and showed high contents percentage, but when cycle was progressed, the capacity maintenance rate decreased more than VC and FEC as the capacity and efficiency at the time of filling decreased, and VEC showed lowest performance in efficiency and capacity maintenance rate. Changes of SEI could not be verified through SEM, but it was identified that as the cycle of SEI ingredients was progressed through FT-IR, ingredients of Alkyl carbonate ($RCO_2Li$) affiliation of the $2850-2900cm^{-1}$ was maintained more solidly and the resistance increased as cycle was progressed through EIS, and specially, it was identified that the resistance due to No-Additive and SEI of VEC became very significant. Continuous loss of additives was verified through GC-MS, and the loss of additives from partial decomposition and remodeling of SEI formed the non-uniform surface of SEI and is judged to be the increase of resistance.

• Transactions of the Korean hydrogen and new energy society
• /
• v.31 no.1
• /
• pp.1-7
• /
• 2020

The synthesis and catalytic activities over vanadium carbides were examined for ammonia decomposition reaction to produce the hydrogen. In particular, the comparison of vanadium nitrides were made on the ammonia decomposition reaction. The experimental data exhibited that BET surface areas ranged from 5.2 ㎡/g to 25.6 ㎡/g and oxygen uptake values varied from 3.8 μmol/g to 31.3 μmol/g. It is general that vanadium carbides (VC) were observed to be superior to vanadium nitrides for ammonia decomposition reaction. The primary reason for these differences were thought to be related to the extent of electronegativity between these materials. Most of vanadium carbide crystallites were exceeded by Pt/C crystallite. We assumed that the activities for vanadium carbide crystallites (VC) were comparable to or even higher than that determined for the Pt/C crystallite.

• Journal of International Academy of Physical Therapy Research
• /
• v.8 no.2
• /
• pp.1146-1151
• /
• 2017

The purpose of this study was to compare the effects of respiratory exercise on cardiopulmonary function and muscle activity of rectus abdominis in smokers and non-smokers with elderly people. All the participants were older than 65 years, and twenty non-smokers, and twenty smokers participated. Non-smokers and smokers were randomly divined into 10 feedback breathing exercises (FBE) and a balloon-blowing exercise (BBE) group. The FBE and the BBE were performed three times a week for four weeks. Forced vital capacity (FVC), forced expiratory volume at one second (FEV1), forced expiratory volume at one second/forced vital capacity (FEV1/FVC), peak expiratory flow (PEF), and vital capacity (VC) were measured as pulmonary function. EMG was used to measure the activity of the rectus abdominis. In the FBE and BBE groups, $FEV_1$ was significantly lower in non-smokers compared to smokers at two and four weeks (p<.05), $FEV_1/FVC$, PEF and VC were significantly lower in non-smokers compared to smokers to pre-test, two weeks, four weeks and six weeks (p<.05). Muscle activity of rectus abdominis was significantly difference in the BBE group at pre-test, two weeks, four weeks, and six weeks (p<.05). These results suggest that respiratory exercise was effective in improving pulmonary function and rectus muscle activity.