• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1992년도 추계학술발표강연 및 논문개요집
• /
• pp.10-10
• /
• 1992

• 한국압력기기공학회 논문집
• /
• 제7권1호
• /
• pp.1-8
• /
• 2011

Advanced SITs of the evolutionary PWRs have the advantage that they can passively control the ECC water discharge flow rate. Thus, the LPSI pumps can be eliminated from the safety injection system owing to the benefit of the advanced SITs. In the present study, a passive sealing plate was designed in order to overcome the shortcoming of the advanced SITs, i.e., the early nitrogen discharge through the stand pipe. The operating principle of the sealing plate depends only on the natural phenomena of buoyancy and gravity. The performance of the sealing plate was evaluated using the VAPER test facility, equipped with a full-scale SIT. It was verified that the passive sealing plate effectively prevented the air discharge during the entire duration of the ECC water discharge. Also, the major performance parameters of the advanced SIT were not changed with the installation of the sealing plate.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.635-640
• /
• 2004

The present paper provides the design specifications and working principle of flow controlling vortex valve which will be adopted in a Korean next generation reactor (APR1400). The vortex valve is installed inside the pressurized safety injection tank of APR1400, and it passively controls the water discharge flowrate from the tank. In the present study, the performance of the vortex valve have been evaluated throughout the repeated experiments in the full-scale test facility called VAPER(VAlve Performance Evaluation Rig). Based on the experimental results, it is confirmed that the currently developed vortex valve satisfies the major performance requirements of APR1400 plant design in view of the peak discharge flowrate, pressure loss coefficient, and total discharge duration time. To achieve the highest quality of the experimental results, a quality assurance program for vortex valve tests has been strictly applied.

• 공업화학
• /
• 제33권2호
• /
• pp.159-165
• /
• 2022

WO₃ 광촉매의 광분해 성능을 증대시키기 위하여 산소결핍자리 생성을 유도하기 위한 불소 도핑을 수행하였다. 불소 도핑을 위하여 플라즈마 불소화와 직접 기상 불소화를 진행하였으며, 두 가지 방법으로 불소화한 WO₃ 광촉매의 광분해 성능을 비교하기 위하여 메틸렌블루 염료 분해 성능을 평가하였다. 플라즈마 불소화한 WO₃ 광촉매와 직접 기상 불소화한 WO₃ 광촉매의 산소결핍자리는 각 14.65 및 18.59%로 미처리 WO₃ 광촉매 대비 각 23, 56% 증가하였으며, WO₃ 광촉매의 산소결핍자리가 증가함에 따라 메틸렌블루 염료분해 성능 역시 미처리 WO₃ 광촉매 대비 각 1.7, 3.4배 증가한 것을 확인하였다. 또한 불소 도핑 후 밴드갭 에너지는 각 2.95 eV에서 2.64, 2.45 eV로 감소한 것을 확인하였다. 이러한 결과로 미루어 보아 직접 기상 불소화 공정이 플라즈마 불소화 공정과 비교하여 WO₃ 광촉매의 활성을 증대시키는데 유리한 공정인 것으로 사료된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.230.2-230.2
• /
• 2005

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3413-3417
• /
• 2007

In recent semiconductor manufacturing clean rooms, air washers are used to remove airborne gaseous contaminants such as $NH_3$, SOx and organic gases from the outdoor air introduced into clean room. In the present study, an experiment was carried out to examine the improvement of removal efficiency for the gaseous contaminants. In order to improve the gas removal efficiency, a hot water contact heat exchanger was installed upstream of the air washer to heat and humidify the incoming outdoor air before entering the air washer.

• 설비공학논문집
• /
• 제9권2호
• /
• pp.122-133
• /
• 1997

Numerical analysis using finite volume method has been carried out to examine the effect of degree of superheat of LiBr aqueous solution on heat and mass transfer occurred in absorption process. According to the result of this study, it was found that refrigerant vaper was generated at the entrance region of absorber when LiBr aqueous soltion was superheated. As the degree of superheat increases, heat transfer rate increases and vapor absorption rate decreases. The increase in averaged Nusselt and Sherwood numbers could be found as film Reynolds number increases. The larger the degree of superheat, the greater the averaged Nusselt and Sherwood numbers.

• 설비공학논문집
• /
• 제7권4호
• /
• pp.600-610
• /
• 1995

When combustion gas is cooled down below the dew point of sulfuric acid vapor in the heat recovery systems, condensation occurs. Since the condensed sulfuric acid solution causes low-temperature corrosion in materials, it is important to measure the SOx dew point by electric measurement. In this study, two kinds of probes having electric gaps of 1mm or 2mm were used. and experiments were carried out by the parameters of sulfuric acid vapor and water vapor concentration. The changes of electric current caused by sulfuric acid condensed on the surface of probe according to the cooling rate and the probe head surface temperature were sudied. The opimum cooling rate was decreased with the increasing of water vaper concentration regardless of sulfuric acid concentration. The sensitivity of electric current is improved for the narrower gap(1mm) of ring electrodes, but it rarely affects the SOx dew point measuring of different probes according to the change of cooling rate.

• Bulletin of the Korean Chemical Society
• /
• 제22권11호
• /
• pp.1183-1191
• /
• 2001

The metallorganic chemical vapor deposition (MOCVD) method has been used to prepare TiO2 thin films for the degradation of hazardous organic compounds, such as 2-chlorophenol (2-CP). The effect of supporting materials and metal doping on the photocatalytic activity of TiO2 thin films also has been studied. TiO2 thin films were coated onto various supporting materials, including stainless steel cloth(SS), quartz glass tube (QGT), and silica gel (SG). Transition metals, such as Pd(II), Pt(IV), Nd(III) and Fe(III), were doped onto TiO2 thin film. The results indicate that Nd(Ⅲ) doping improves the photodegradation of 2-CP. Among all supporting materials studied, SS(37 ${\mu}m)$ appears to be the best support. An optimal amount of doping material at 1.0 percent (w/w) of TiO2-substrate thin film gives the best photodegration of 2-CP.

• 공업화학
• /
• 제32권6호
• /
• pp.632-639
• /
• 2021

본 연구에서는 WO₃ 광촉매의 활성을 증대시키기 위하여 불소 도핑을 수행하고, 메틸렌블루 염료를 이용하여 광분해 특성을 고찰하였다. 본 연구를 통해 제조된 WO_3-xF_x 광촉매는 WCl₆ 전구체로부터 WO₃ 광촉매를 제조하기 위한 소결과정 중에 기상 불소화 방법을 이용하여 제조하였다. 불소 도핑 후 WO₃ 광촉매의 밴드갭이 2.95 eV에서 2.54 eV로 감소하였고, 산소 결핍 자리 영역이 약 55% 증가하였다. 또한 제조한 광촉매의 초기 염료 분해 성능은 불소 도핑 전과 비교하였을 때 10%에서 60%로 불소 도핑 후 6배 증가하였다. 이는 불소가 도핑되어 광촉매의 밴드갭이 감소하여 적은 에너지로 촉매 활성 반응을 가능하게 하고, 또한 산소 결핍이 생성된 표면 결함이 WO₃ 광촉매의 가시광선 흡수영역을 증대시켜 광촉매 활성이 증가한 것으로 사료된다. 본 연구에서는 후처리 공정이 불필요한 원스텝 기상 불소화 반응을 이용하여 손쉬운 방법으로 광촉매활성이 뛰어난 불소가 도핑된 WO_3-xF_x 광촉매를 제조할 수 있음을 확인하였다.