• Resources Recycling
• /
• v.22 no.4
• /
• pp.38-45
• /
• 2013

The porous ceramic beads using mine tailing were prepared and applied to catalytic converter for NOx/SOx removal. Catalytic support was used synthesized mesoporous silica (SBA-15) which coated on surface. Internal structure for porous ceramic beads was composed of three-dimensional network structure and porosity was about 80%. In addition, the specific surface area for mesoporous silica(SBA-15) coated on converter was significantly increased 55 $m^2/g$ compared with 0.8 $m^2/g$ before coating. NOx/SOx removal experiment was performed using $V_2O_5$ and $V_2O_5$/CuO converter. NOx conversion ratio for $V_2O_5$/CuO converter was approximately increased 10% compared to $V_2O_5$ converter. In addition, catalytic converter of $V_2O_5$/CuO was shown to remove 95% of NOx and 90% of SOx at reaction temperature of $350^{\circ}C$, space velocity of 10000 $h^{-1}$ and $O_2$ concentrations of 5%, respectively.

• Sleep Medicine and Psychophysiology
• /
• v.22 no.2
• /
• pp.70-76
• /
• 2015

Background and Objectives: Insomnia is the most prevalent sleep disorder in the general population and is considered to be a disorder of hyperarousal. The aim of this study was to measure the psychophysiological responses in insomnia patients using a biofeedback system, and to compare them with results from normal healthy subjects. Materials and Methods: Eighty patients with primary insomnia (35 males and 45 females, average age $49.71{\pm}12.91years$) and 101 normal healthy controls (64 males and 37 females, average age $27.65{\pm}2.77$) participated in this study. Electromyography (EMG), heart rate (HR), skin conductance (SC), skin temperature (ST), and respiratory rate (RR) were recorded using a biofeedback system during 5 phases (baseline, stress 1, recovery 1, stress 2, recovery 2) of a stress reactivity test, and average values were calculated. Difference in values between the two groups in each corresponding phase was analyzed with independent t-test, and change in values across phases of the stress reactivity test was analyzed with paired t-test (all two-tailed, p<0.05). Results: Compared to normal controls, insomnia patients had higher EMG in all 5 phases (baseline : $7.72{\pm}3.88{\mu}V$ vs. $4.89{\pm}1.73{\mu}V$, t = -6.06, p<0.001 ; stress 1 : $10.29{\pm}5.16{\mu}V$ vs. $6.63{\pm}2.48{\mu}V$, t = -5.84, p<0.001 ; recovery 1 : $7.87{\pm}3.86{\mu}V$ vs. $5.17{\pm}2.17{\mu}V$, t = -5.61, p<0.001 ; stress 2 : $10.22{\pm}6.07{\mu}V$ vs. $6.98{\pm}2.98{\mu}V$, t = -4.37, p<0.001 ; recovery 2 : $7.88{\pm}4.25{\mu}V$ vs. $5.17{\pm}1.99{\mu}V$, t = -5.27, p<0.001). Change in heart rate across phases of the stress reactivity test were higher in normal controls than in insomnia patients (stress 1-baseline : $6.48{\pm}0.59$ vs. $3.77{\pm}0.59$, t = 3.22, p = 0.002 ; recovery 1- stress 1 : $-5.36{\pm}0.0.59$ vs. $-3.16{\pm}0.47$, t = 2.91, p = 0.004 ; stress 2-recovery 1 : $8.45{\pm}0.61$ vs. $4.03{\pm}0.47$, t = 5.72, p<0.001 ; recovery 2-stress 2 : $-8.56{\pm}0.65$ vs. $4.02{\pm}0.51$, t = -5.31, p<0.001). Conclusion: Psychophysiological profiles of insomnia patients in a stress reactivity test were different from those of normal healthy controls. These results suggest that the sympathetic nervous system is more highly activated in insomnia patients.

• Journal of Dairy Science and Biotechnology
• /
• v.35 no.4
• /
• pp.255-261
• /
• 2017

The purpose of this study was to investigate the probiotic properties and antioxidant capacity of lactic acid bacteria isolated from Vietnamese feces and the Korean traditional food kimchi. Six isolated strains were identified as Lactobacillus sp. by 16S rRNA sequencing. All strains showed good resistance to low pH (1.5, 2.0, and 3.0) and 0.3% oxgall bile acids. Culture filtrates from the six strains showed various antioxidant effects, including DPPH, ABTS, reducing power, and metal chelating ($Fe^{2+}$) activities. Two of the six Lactobacillus strains showed potential probiotic activity. Heat resistance and adhesion assays were conducted by mixing the selected strains, Lactobacillus acidophilus V4, Lactobacillus plantarum V7, and Lactobacillus paracasei DK121 isolated from kimchi. The results showed that the heat resistance of these strains was similar to that of a commercial strain, L. plantarum LP. In addition, a mucin attachment assay using the mixture of selected strains (V4, V7, and DK121) showed high binding activity to the mucous layer. In conclusion, a mixture of V4, V7, and DK121 shows promising probiotic activity and may be useful for the development of health-related products.

• The Korean Journal of Physiology and Pharmacology
• /
• v.16 no.5
• /
• pp.339-342
• /
• 2012

Inter-individual pharmacokinetic variation of H2-receptor antagonist is related to genetic polymorphism of CYP2C19. We investigated the frequency of CYP2C19 genetic polymorphism and the treatment duration of cimetidine by CYP2C19 genotypes in functional dyspeptic patients without definite causes who were treated with cimetidine in Korea. One hundred subjects with functional dyspepsia participated in this study from March 1, 2010 to June 30, 2011. They were tested by upper gastrointestinal endoscopy and treated for their dyspepsia with cimetidine. The single nucleotide polymorphisms (SNPs) of CYP2C19 were genotyped using the Seeplex CYP2C19 ACE Genotyping system. There were no significant differences in the demographic, clinical, or laboratory findings among the CYP2C19 subgroups which are wild type homozygote (W/W), heterozygote (W/V), and variant homozygote (V/V). The frequencies of CYP2C19 subgroups were 33 (33%) in W/W, 49 (49%) in W/V, and 18 (18%) in V/V, respectively. The mean duration of cimetidine treatment (in weeks) was the shortest in the V/V among the CYP2C19 genotypes (W/W: $5.1{\pm}1.5$, W/V: $4.0{\pm}1.7$, V/V: $2.1{\pm}0.7$; p<0.001). This study can also act as a basis for further investigation to identify the underlying genetic, epigenetic, or environmental factors in CYP2C19 enzyme activity.

• Clean Technology
• /
• v.23 no.2
• /
• pp.172-180
• /
• 2017

Thermodynamic evaluation indicates that nearly 100% conversion of elemental mercury to oxidized mercury can be attained by HCl of several tens of ppm level at the temperature window of SCR reaction. Cu-, Fe-, Mn-chloride loaded $V_2O_5-WO_3/TiO_2$ catalysts revealed good NO removal activity at the operating temperature window of SCR process. The catalysts with high desorption temperature indicating adsorption strength of $NH_3$ revealed higher NO removal activity. The HCl fed to the reaction gases promoted the oxidation of mercury. However, the activity for the oxidation of elemental mercury to oxidized mercury by HCl was suppressed by $NH_3$ inhibiting the adsorption of HCl to catalyst surface under SCR reaction condition containing $NH_3$ for NO removal. Metal chloride loaded $V_2O_5-WO_3/TiO_2$ catalysts showed much higher activity for mercury oxidation than $V_2O_5-WO_3/TiO_2$ catalyst without metal chloride under SCR reaction condition. This is primarily attributed to the participation of chloride in metal chloride on the catalyst surface promoting the oxidation of elemental mercury.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.582-585
• /
• 2011

In this study, surface-adsorbed species of 1,2-dichlorobenzene (1,2-DCB) on mesoporous $V_2O_5/TiO_2$ catalysts synthesized by spray pyrolysis were investigated through the adsorption/desorption performed using in situ FT-IR cell. Also, the comparison of adsorbed species with $TiO_2$ and $V_2O_5/TiO_2$ synthesized by the incipient wetness was carried out.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.8 no.1
• /
• pp.12-16
• /
• 1983

This paper is dealing a $V_3O_5-P_2O_5$ metal oxide glass semiconductor. This semiconductor is easy to fabricate in the atmospheric condition at relatively low temperature. The element is made like a bead, and platinum segments are used as electrodes. Other kind of metal withstanding high temperature near 1000C can also be used as electrode. Experiment verifies that the fabricated element has the resistance in the order of about ~$10^5\;\Omega$, and shows negative resistance characteristics and switching characteristics with respect to temperature. An equivalent circuit of the element is proposed based on its electrical characteristcs.

• KSBB Journal
• /
• v.18 no.3
• /
• pp.180-185
• /
• 2003

Glycosaminoglycans (GAGS was extracted from sea squirt, Styela clava with sodium phosphate at 105$^{\circ}C$ for 2 hr and deproteinized with trichloroacetic acid or hydrochloride. The GAGs obtained from tunic consist 41.7% crude carbohydrates, 31.8% crude protein, and 31.2% sulfate. It was mainly constituted of galactose, glucosamine, glucose, mannose, and glacrosamine. The prominent amino acid were phenylalanine, threonine, glutamic acid, and aspartic acid. Mineral contents was mainly constituted 3.0 mg% sodium, 1.6 mg% potassium, and 1.2 mg% phosphorus. Trichloroacetic acid, hydrochloride and 5-sulfosalicylic acid were used for deprotein of the GAGs. Effective volume for deprotein of crude GAGs were 5.0% trichloroacetic acid (w/v) and 10.0% HCI (v/v) treatment. The deproteinized GAGs contained 35.1%, 35.4% of protein and 22.0%, 18.5% of sulfate, respectively.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.239-244
• /
• 2013

This paper presents a design of the CMOS LDO regulator with a UVLO protection function for a high speed PMIC. Proposed LDO regulator circuit consists of a BGR reference circuit, an error amplifier and a power transistor and so on. UVLO block between the power transistor and the power supply is added for a low input protection function. Also, UVLO block showed normal operation with turn-off voltage of 2.7V and turn-on voltage of 4 V in condition of 5 V power supply. Proposed circuit generated fixed 3.3 V from a supply of 5V. From SPICE simulation results using a $1{\mu}m$ high voltage CMOS technology, simulation results were 5.88 mV/V line regulation and 27.5 uV/mA load regulation with load current 0 mA to 200 mA.

• Journal of IKEEE
• /
• v.20 no.3
• /
• pp.295-298
• /
• 2016

In this paper, we analysed the properties of the conventional ESD protection devices such as SCR, MVSCR, LVTSCR. The electrical characteristics and the turn-on time properties are simulated by Synopsys T-CAD simulator. As the results, the devices have the holding voltages between 2V and 3V, and the trigger voltage of about 20V with SCR, of about 12V with MVSCR, of about 9V with LVTSCR. The results of the simulation for the turn-on time properties are 2.8ns of SCR, 2.2ns of MVSCR, 2.0ns of LVTSCR. Thus, we prove that LVTSCR has the shortest turn-on time. However, the second breakdown currents(It2) of the devices are 7.7A of SCR, 5.5A of MVSCR, 4A of LVTSCR. This different properties have to be adapted by the operation voltages for I/O Clamps.