• 자원리싸이클링
• /
• 제21권1호
• /
• pp.60-65
• /
• 2012

본 연구는 치과용 순 타이타늄 스크랩을 재활용하여 진공 아크 용해에 의해 Ti-6Al-4V 합금을 제조하였고, 이때 산소함량이 다르게 제조된 Ti-6A1-4V 합금의 물성을 평가하였다. 사용된 타이타늄 스크랩은 치과용 임플란트 재료로써 ASTM G1~G4 등급으로 산소함량이 다르게 진공 아크 용해에 의해 건전한 잉곳을 만든 후 Ti-6Al-4V 합금을 제조하였다. 합금 제조시 875 torr의 가압 아르곤 분위기에서 용해하였을 때 Al 조성의 손실이 방지됨을 확인하였다. 제조된 Ti-6Al-4V의 산소함량이 1170~3340 ppm으로 증가함에 따라 Ti-6Al-4V의 경도가 증가하여 순 타이타늄의 경향과 동일함을 확인하였다. 따라서 본 연구를 통해서 Ti-6Al-4V 합금 제조에 있어서 진공 아크 용해에 의해 치과용 순 타이타늄 스크랩의 재활용 가능성을 확인하였다.

• 한국환경복원기술학회지
• /
• 제13권4호
• /
• pp.10-17
• /
• 2010

The objectives of this study were to compare the growth of Vitex rotundifolia as affected by the difference of soil depth and mixture ratio in a shallow-extensive green roof module system, and to identify the level of soil thickness and mixture ratio as suitable growing condition to achieve the desired plant growth in green roof. Different soil thickness levels were achieved under 7cm, 15cm and 25cm of shallow-extensive green roof module systems made by woody frame of $500{\times}500{\times}300mm$. Soil mixture ratio were eight types for perlite : peatmoss : leafmold = 7 : 1 : 2 (v/v/v, $P_7P_1L_2$), perlite : peatmoss : leafmold = 6 : 2 : 2 (v/v/v, $P_6P_2L_2$), perlite : peatmoss : leafmold = 5 : 3 : 2 (v/v/v, $P_5P_3L_2$), perlite : peatmoss : leafmold = 4 : 4 : 2 (v/v/v, $P_4P_4L_2$), only sand ($S_{10}$), sand : leafmold = 7 : 3 (v/v, $S_7L_3$), sand : leafmold = 5 : 5 (v/v, $S_5L_5$) and only leafmold ($L_{10}$). The growth response of Vitex rotundifolia had fine and sustain condition in $P_6P_2L_2$, $P_5P_3L_2$ and $P_4P_4L_2$., Especially, in case of $P_6P_2L_2$, growth response appeared to be good even in soil thickness 7cm, which showed low survival rates of Vitex rotundifolia in other soil mixtures. Tree height, root diameter, photosynthesis and chlorophyll contents tended to increase with increased soil thickness.

• Corrosion Science and Technology
• /
• 제17권3호
• /
• pp.129-137
• /
• 2018

The resistance to corrosion of additive manufactured (3D printing) Ti-6Al-4V alloys was investigated using micro-electrochemical tests. In terms of corrosion resistance, the acicular martensitic ${\alpha}^{\prime}$ phase in such additive manufactured Ti-6Al-4V was the focus of attention, and its behavior was distinct from that of conventional subtractive manufactured Ti-6Al-4V. To order to identify ${\alpha}^{\prime}$ phase, XRD tests were performed and micro Vickers hardness was measured for different grains (bright and dark grains) in the additive manufactured Ti-6Al-4V alloy. Micro-electrochemical tests were performed to measure corrosion resistance of bright and dark grains in the additive manufactured Ti-6Al-4V alloy with specially designed electrochemical micro-droplet cell. Critical pitting temperature (CPT) measurement was performed to evaluate the resistance to pitting corrosion of additive manufactured Ti-6Al-4V alloys with different volumes of ${\alpha}^{\prime}$ phase and subtractive manufactured Ti-6Al-4V alloy. The dark grains of the laminated Ti-6Al-4V alloy distributed broader than the bright grains measured with low microhardness. The dark grains of the Ti-6Al-4V alloy, which was rich in martensite ${\alpha}^{\prime}$, had lower general corrosion and pitting resistance than bright grains. As the fraction of martensite ${\alpha}^{\prime}$ phase increased, the resistance to the pitting corrosion decreased.

• The Journal of Advanced Prosthodontics
• /
• 제6권6호
• /
• pp.512-520
• /
• 2014

PURPOSE. The purpose of this study was to assess the surface characteristics and the biocompatibility of zirconium (Zr) coating on Ti-6Al-4V alloy surface by radio frequency (RF) magnetron sputtering method. MATERIALS AND METHODS. The zirconium films were developed on Ti-6Al-4V discs using RF magnetron sputtering method. Surface profile, surface composition, surface roughness and surface energy were evaluated. Electrochemical test was performed to evaluate the corrosion behavior. Cell proliferation, alkaline phosphatase (ALP) activity and gene expression of mineralized matrix markers were measured. RESULTS. SEM and EDS analysis showed that zirconium deposition was performed successfully on Ti-6Al-4V alloy substrate. Ti-6Al-4V group and Zr-coating group showed no significant difference in surface roughness (P>.05). Surface energy was significantly higher in Zr-coating group than in Ti-6Al-4V group (P<.05). No difference in cell morphology was observed between Ti-6Al-4V group and Zr-coating group. Cell proliferation was higher in Zr-coating group than Ti-6Al-4V group at 1, 3 and 5 days (P<.05). Zr-coating group showed higher ALP activity level than Ti-6Al-4V group (P<.05). The mRNA expressions of bone sialoprotein (BSP) and osteocalcin (OCN) on Zr-coating group increased approximately 1.2-fold and 2.1-fold respectively, compared to that of Ti-6Al-4V group. CONCLUSION. These results suggest that zirconium coating on Ti-6Al-4V alloy could enhance the early osteoblast responses. This property could make non-toxic metal coatings on Ti-6Al-4V alloy suitable for orthopedic and dental implants.

• 대한전자공학회논문지
• /
• 제4권2호
• /
• pp.16-21
• /
• 1967

이 보고는 처음에 Li drifted Ge 검출기에 관해서 이 Li drifted Ge 검출기에 의한 열중성자로부터의 Cl(n, r) 반응에서 생기는 r선 스텍트로를 보여준다. 이 Li drifted Ge 검출기의 에너지 분해능은 의 122KeV에서 4.5KeV, 의 1333KeV에서 10KeV이다.

• 마이크로전자및패키징학회지
• /
• 제10권4호
• /
• pp.9-14
• /
• 2003

바이폴라 기술로 1.8V 구동전압에서 10Mbps 이상의 높은 데이터 전송율을 갖는 새로운 광연결 수신기를 제작하였다. 10Mbps 입력신호 (duty ratio=50%, $V_{IL}$(저준위 입력전압) =0.5V, $V_{IH}$(고준위 입력전압) = 1.5V)에 대한 제작된 소자의 평균 출력 전압은 $V_{OL}$(저준위 출력전압) = 0V, $V_{OH}$(고준위 출력전압) = 1.15V로 나타났으며, 1.5V 고준위 입력전압 아래에서 평균 소비전류는 4.6mA로 나타났다. 또한 출력파형에서 duty ratio는 52.6%, 상승시간($t_r$)과 하강시간($t_f$)은 각각 9.5ns와 6.8ns로 나타났으며 전파지연차($t_{PHC}-t_{PLH}$)와 jitter는 각각 11.7ns와 4.3ns로 나타났다.

• 유기물자원화
• /
• 제11권4호
• /
• pp.114-119
• /
• 2003

본 연구는 남은 음식물의 사료화를 목적으로 Lactobacillus acidophilus와 Saccharomyces cerevisiae를 이용하여 남은 음식물을 발효시켜 고품질의 생균사료를 생산하기 위하여 실시하였다. 액상으로 충분히 마쇄시킨 남은 음식물 시료에 공기주입량을 0v.v.m 0rpm, 0.25v.v.m 100rpm, 0.5v.v.m 200rpm과 1v.v.m 500rpm으로 다르게 조절하여 $30^{\circ}C$에서 발효시킨 결과 0.5v.v.m 200rpm의 조건에서 생균수가 $4.5{\times}10^9CFU/m{\ell}$로 가장 높은 것으로 나타났다. 또한 공기주입량을 조절함으로써 최종 발효물의 pH를 조절할 수 있었고 사료로서의 기호성에 알맞고 보존성도 좋은 4-5의 pH범위를 얻을 수 있었다.

• 한국작물학회지
• /
• 제40권1호
• /
• pp.92-97
• /
• 1995

콩의 주요 생육기별 관수처리시간에 따른 생육양상과 감수요인을 구명하고자 콩의 생육기 $V_3(6월\;16일),\;V_6(6월\;29일),\;R_2(7월\;3일),\;R_4(7월\;29일)$ 시기에 관수시간을 6.12.24시간씩 명명 유지하여 비가림하우수내에서 pot시험한 결과를 요약하면 다음과 같다. 1. 개화기는 무처리 대비 $V_3{\cdot}V_6$생육기 관수처리에서 1일정도 지연되었다. 2. 성숙기는 무처리 대비 $V_6$시기 6~12시간 관수처리시 2~3일 조숙되었으나, $V_6$시기 24 시간과 $R_2{\cdot}R_4$시기의 관수처리는 2~8일 늦어지는 경향이었다. 3. $V_6와\;R_2$시기의 24시간 관수처리는 생장점이 고사하였으며 경장과 주경절수는 관수처리 시기가 빠르고 처리시간이 길수록 감소하는 경향이었다. 4. 내수는 처리시기가 늦고 처리시간이 길수록 감소되는 경향으로 $V_6$시기 24시간과 $R_2$ 6~24시간 $R_4$시기 6시간 관수처리는 16~26%, $R_4$시기 12시간 관수처리는 40%, $R_4$시기 24시간 관수처리는 60%씩 명명 감소되었다. 5. 수량은 관수시기가 늦고 관수시간이 길수록 감수되는 경향으로 무처리 대비 $V_3$시기 전처리와 $V_6$시기 6.12시간 처리까지 유의차가 없었으나 $V_6$시기 24시간, $R_2$시기 6.12 시간 및 $R_2$시기 6시간 관수처리는 27~36%, $R_2$시기 24시간 관수처리는 43%, $R_4$시기 12시간 관수처리는 53%, $R_4$시기 24시간 관수처리는 66%씩 명명 감수되었다. 6. 콩 생육기별 관수피해 정도는 $R_4>\;R_2>\;V_6>\;V_3$ 시기순으로 감수폭이 컸다.

• 약학회지
• /
• 제40권2호
• /
• pp.193-201
• /
• 1996

In order to study the role of C-terminal aromatic region of T4 endonuclease V in the interaction with substrate DNA, NMR and Fluorescence spectrum were recorded. Analysis of flu orescence emission spectra showed that C-terminal region of T4 endonuclease V is in or very near the binding site. In the HSQC spectrum of $^{15}N$-Tyr-labeled T4 endonuclease V*DNA complex, the broadening of a peak was observed. It is presumed that this peak corresponds to one among three tyrosine residues which belong to the WYKYY segment of C-terminal region of T4 endonuclease V. Interactions of peptide fragments consisting of C-terminal residues of T4 endonuclease V with DNAs(TT-, T^T-DNA) were investigated by NMR and Fluorescence experiment. The results suggest that two peptide fragments themselves bind to DNAs and their binding pattern is not an intercalation mode.

• 한국응용과학기술학회지
• /
• 제16권3호
• /
• pp.205-210
• /
• 1999

The Mo(V) $di-{\mu}-oxo$ type $[Mo_2O_4(H_2O)_2L]Cl_2$ complexes(L: 4,4'-Diphenyl-2,2'-dipyridyl, 4,4'-Dimethyl-2,2'-dipyridyl, 4,7-Diphenyl-1,10-phenanthroline) have been prepared by the reaction of $[Mo_2O_4(H_2O)_6]^{2+}$ with a series of chelate ligands. These complexes are completed by two terminal oxygens arranged trans to one another and each ligand forms a chelate types. In $Mo_2O_4(H_2O)_2L$ two $H_2O$ coordinated at trans site of terminal oxgens. The prepared complexes have been characterized by elemental analysis, infrared spectra, electronic spectra, $^1H$ nuclear magnetic resonance spectra, and thermal analysis(TG-DTA). In the potential range -0.00V to -1.00V at scan rate of $50mVs^{-1}$, a cathodic peak at -0.83V ${\sim}$ -0.88V (vs SCE) and an anodic peak at -0.54V ${\sim}$ -0.88V (vs SCE) have been observed in aquous solution. The ratio of the cathodic to anodic current(Ipc/Ipa) is almost 2, we infer that redox is irreversible as dimer forms broken.