• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5B
• /
• pp.463-468
• /
• 2009

In VANET(Vheicle Ad hoc Network), the researches based on the wireless LAN are conducting and the method based on 802.11a is being adapted in IEEE 802.11p WAVE(Wireless Access in Vehicular Environments). However, wireless LAN which uses a single channel in a competition can cause transmission delays because of a frequent collision and a use of CSMA/CA to avoid competition in VANET requiring a fast access. In this paper, we designed CMMP (Clustering based Multi-channel MAC protocol) adequate to VANET and then confirmed the appropriate channel conditions in a V2V communication on the basis of this protocol. The simulation results showed that a packet collision and a transmission delay by the use of an existing single channel based on the contention decreased more than 60% by CMMP.

• Journal of Korea Multimedia Society
• /
• v.16 no.3
• /
• pp.330-335
• /
• 2013

It is expected that the vehicle safety systems using vehicle-to-vehicle communication can reduce the possibility of vehicle collision and prevent the chain crash by promptly delivering the status of neighboring vehicles. Many IEEE 802.11 DCF based Flooding schemes have been proposed, but they may generally expose the problems that the chances of a chain-collision reaction are sharply increased as the vehicle density has increased. Therefore, this paper proposes the chain-collision prevention scheme using a broadcasting-based adaptive report. The proposed method can adaptively allocate the preoccupancy right based on a quantitative priority order and then promptly deliver the warning messages in neighboring areas. Moreover, it is shown from simulation that the proposed scheme provides the performance gains over the existing Flooding based scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.11
• /
• pp.1063-1070
• /
• 1991

A microstrip array antenna are designed to depend on the size of rectangular microstrip patch for the relative current destribution to be 1:2:2:1 or 1:1:2:2:1:1 using Tchebyscheff polynominals, and it consist of sharp beam pattern. Gain difference between the main lobe and sidelobe is calculated for theoritical values of 21.97 db or 29.54 db. The designed microstrip array antenna are measureed various characteristics, such as return loss, resonant frequency, radiation pattern, bandwidth, beamwidth, and agreed with each other and theoretical value. Also it is presented a process of phase variation of patch array antenna depend on relative current distribution for beam scanning.

• Journal of electromagnetic engineering and science
• /
• v.2 no.2
• /
• pp.117-123
• /
• 2002

This paper describes the design for the resistive FET mixer with low If for the 4-Ch DBF(Digital Beam Forming) receiver This DBF receiver based on the direct conversion method is generally suitable for high-speed wireless mobile communications. A radio frequency(RF), a local oscillator(LO) and an intermediate frequency(If) considered in this research are 2.09 GHz, 2.08 CHz and 10 MHz, respectively. This mixer is composed of band pass filter, a low pass filter and a DC bias circuit. Super low noise HJ FET of NE3210S01 is considered in design. The RE input power, LO input power and Vcs are used -10 dBm, 6 dBm and -0.4 V, respectively. In the 4-Ch resistive FET mixer, the measured If and harmonic components of 10 MHe, 20 MHz and 2.087 CHz are about -19.2 dBm, -66 dBm and -48 dBm, respectively The If output power observed at each channel of 10 MHz is about -19.2 dBm and it is higher 28.8 dBm than the maximum harmonic component of 2.087 CHz. Each If output spectrum of the 4-Ch is observed almost same value and it shows a good agreement with the prediction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.3
• /
• pp.588-594
• /
• 2015

Although GPS technology for location positioning system has been widely used, it is difficult to be used in intelligent transport systems, due to the large positioning error and limited area for receiving radio signals. Thanks to the rapid development of LED technology, LED lights become popular in many applications. Especially, visible light communications (VLC) has raised a lot of interests because of the simultaneous functioning of LED illumination and communication. Recent studies on positioning system using VLC mainly focused on indoor environments and still difficult to satisfy positioning accuracy and simple implementation simultaneously. In this paper, we propose a positioning system based on VLC using the coordinate information of LEDs installed on the road infrastructure. Extracting the LED signal, obtained through VLC, from the easily accessible camera image, it is possible to estimate the position of the car on the road. Simulation results show that the proposed scheme can achieve a high positioning accuracy of 1 m when large number of pixels is utilized and the distance from the LED light is close.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.5
• /
• pp.379-389
• /
• 1988

In this paper, an algorithm for obtaining 2-state switching failure function and a terminal pair reliability evaluation method in a communication network are proposed. The communication network is modeled by a graph. By using the sequence of matrix transformations for the graph, minimal cut-set matrix representing all minimal cut-sets which completely interrupt the communication path is determined and 2-state switching failure function is then obtained from the minimal cut-set matrix. The terminal pari reliability of the communication network is evaluated by corresponding the random variables to 2-state switching failure function. Illustrative examples are provided to demonstrate the algorithm. A computer program evaluating the terminal pair reliability in a complex and large network has also been developed.

• Communications of the Korean Mathematical Society
• /
• v.38 no.1
• /
• pp.39-46
• /
• 2023

Let R be a commutative ring, M be a Noetherian R-module, and N a 2-absorbing submodule of M such that r(N :_R M) = 𝖕 is a prime ideal of R. The main result of the paper states that if N = Q₁ ∩ ⋯ ∩ Q_n with r(Q_i :_R M) = 𝖕_i, for i = 1, . . . , n, is a minimal primary decomposition of N, then the following statements are true. (i) 𝖕 = 𝖕_k for some 1 ≤ k ≤ n. (ii) For each j = 1, . . . , n there exists m_j ∈ M such that 𝖕_j = (N :_R m_j). (iii) For each i, j = 1, . . . , n either 𝖕_i ⊆ 𝖕_j or 𝖕_j ⊆ 𝖕_i. Let Γ_E(M) denote the zero-divisor graph of equivalence classes of zero divisors of M. It is shown that {Q₁∩ ⋯ ∩Q_n-1, Q₁∩ ⋯ ∩Q_n-2, . . . , Q₁} is an independent subset of V (Γ_E(M)), whenever the zero submodule of M is a 2-absorbing submodule and Q₁ ∩ ⋯ ∩ Q_n = 0 is its minimal primary decomposition. Furthermore, it is proved that Γ_E(M)[(0 :_R M)], the induced subgraph of Γ_E(M) by (0 :_R M), is complete.

• Journal of IKEEE
• /
• v.17 no.2
• /
• pp.176-181
• /
• 2013

This paper presents a CMOS impulse radio ultra-wideband (IR-UWB) receiver implemented using IBM 0.13um CMOS technology for inner/inter-chip wireless interconnection. The IR-UWB receiver is based on the non-coherent architecture which removes the complexity of RF architecture (such as DLL or PLL) and reduces power consumption. The receiver consists of three blocks: a low noise amplifier (LNA) with active balun, a correlator, and a comparator. Simulation results show the die area of the IR-UWB receiver of 0.2mm2, a power gain (S21) of 12.5dB, a noise figure (NF) of 3.05dB, an input return loss (S11) of less than -16.5dB, a conversion gain of 18dB, a NFDSB of 22. The receiver exhibits a third order intercept point (IIP3) of -1.3dBm and consumes 22.9mW of power on the 1.4V power supply.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.509-510
• /
• 2008

본 논문은 $0.18{\mu}m$ CMOS 공정을 사용하여 2.5Gb/s CMOS CDR을 설계하였다. CML type의 논리게이트를 이용하여 보다 높은 주파수의 대역의 데이터를 복원하기 위한 위상비교기(PD)와 PD의 up과 down신호를 지연없이 루프필터(LF)에 공급하기 위한 전하점프(CP) 그리고 외부 스위치를 통해 VCO이득을 조절할 수 있는 링 타입의 VCO로 구성되었다. 또한 VCO의 부담을 줄이기 위하여 half-rate 클럭 테크닉을 사용하였다. Cadence tool을 사용하여 모의실험 및 layout을 하였다. VCO이득은 100MHz/V이고, 클릭 jitter는 rising일 때 27ps, falling일 때 32ps로 우수한 결과를 얻을 수 있었다. 테스트칩 제작은 매그나침 $0.18{\um}$ CMOS 공정을 이용하였다. 칩 사이즈는 PAD를 포함하여 $850um{\times}750um$이다.

• Annual Conference of KIPS
• /
• 2012.11a
• /
• pp.818-821
• /
• 2012

M2M 서비스 지원을 위한 이동통신 인프라 기술은 3GPP에서 MTC(Machine Typer Communications)라 부른다. 최근 3GPP SA1, SA2 에서는 MTC 디바이스와 MTC 서버 통신 모델 기반의 서비스 모델 및 지원에 관한 네트워크 구조 기술표준이 추진되었다. 이 후 후속 작업으로 3GPP SA1에서는 TR 22.888(MTCe: Study on Enhancements for MTC) 문서를 통해 MTC 디바이스 간 통신 시나리오 및 use case 개발이 추진 중이다. TR 22.888 문서에는 MTC 디바이스 간 통신 접속 시나리오 및 use case를 정의하고 이에 대한 3GPP 네트워크 요구사항을 개발하고 있다. 현재 TR 22.888v0.7 에서는 5가지의 MTC 디바이스 간 통신 시나리오가 개발되었다. 각 시나리오는 MTC 디바이스가 접속을 원하는 원격 MTC 디바이스와 연결 설정 과정에서 직접연결, MTC 서버를 통한 연결, 네트워크/MTC 서버 내에 이름 분석 기능(name resolution function) 지원을 통한 연결, 그룹 통신 내 MTC 디바이스 간 연결, 네트워크 코디네이션(network Coordination) 지원을 통한 연결 등으로 구분된다. 본 논문에서는 이와 같은 M2M에서 디바이스간 직접 통신에 관한 시나리오 및 usecase를 분석한다.