• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.2
• /
• pp.23-30
• /
• 2010

This paper presents implementation details of car communications system based on V2I2V model over broadband wireless networks including WCDMA, HSDPA and WiBro. Also, we measures the major performance metrics such as Round Trip Time, end-to-end latency and others between in-vehicle client and location management system by driving across urban areas in Daegu city. Analysis of experimental results would be helpful to consider the applicability of traffic safety services using V2I2V-based car communications over various broadband wireless networks.

• ETRI Journal
• /
• v.37 no.5
• /
• pp.867-876
• /
• 2015

This paper proposes an efficient interference control scheme for vehicular moving networks. The features of the proposed scheme are as follows: radio resources are separated into two resource groups to avoid interference between the cellular and vehicle-to-vehicle (V2V) links; V2V links are able to share the same radio resources for an improvement in the resource efficiency; and vehicles can adaptively adjust their transmission power according to the interference among the V2V links (based on the distributed power control (DPC) scheme derived using the network utility maximization method). The DPC scheme, which is the main feature of the proposed scheme, can improve both the reliability and data rate of a V2V link. Simulation results show that the DPC scheme improves the average signal-to-interference-plus-noise ratio of V2V links by more than 4 dB, and the sum data rate of the V2V links by 15% and 137% compared with conventional schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12A
• /
• pp.1168-1173
• /
• 2005

The HVPS of the TWTA for military satellite communications is developed and tested. With 380 V input DC voltage, the HVPS provides -10.95 kV for Cathode, -4.27 kV for Collectorl and -6.57 kV for Collector2 of the TWT that generates 600 W X-band output signal power. The total output power of the HVPS is about 1.6 kW. The voltage ripples of Cathode, Collectorl and Collector2 are 6 V, 12 V and 6 V, respectively, which are only $0.055\%,\;0.281\%$ and $0.091\%$ compared to the absolute output voltages.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.8
• /
• pp.1933-1954
• /
• 2013

Multiple wireless devices are being widely deployed in Intelligent Transportation System (ITS) services on the road to establish end-to-end connection between vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) networks. Vehicular ad hoc networks (VANETs) play an important role in supporting V2V and V2I communications (also called V2X communications) in a variety of urban environments with distinct topological characteristics. In fact, obstacles such as big buildings, moving vehicles, trees, advertisement boards, traffic lights, etc. may block the radio signals in V2X communications. Their impact has been neglected in VANET research. In this paper, we present a realistic and efficient radio propagation model to handle different sizes of static and moving obstacles for V2X communications. In the proposed model, buildings and large moving vehicles are modeled as static and moving obstacles, and taken into account their impact on the packet reception rate, Line-of-sight (LOS) obstruction, and received signal power. We use unsymmetrical city map which has many dead-end roads and open faces. Each dead-end road and open faces are joined to the nearest edge making a polygon to model realistic obstacles. The simulation results of proposed model demonstrates better performance compared to some existing models, that shows proposed model can reflect more realistic simulation environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1969-1977
• /
• 2016

We study the connection time of vehicle-to-mobile roadside unit (V2MR) communications which can reduce the significant cost of the fixed RSU by installing a gateway of mobile network into a transit bus called the mobile RSU. In the V2MR communications, the connectivity of a commute vehicle can be improved via ad-hoc connection to a nearby mobile RSU. In this paper, we present a new analysis model to estimate the connection time between a commute vehicle and a mobile RSU, when there is a bus station in the overlapping route. Since the connection time between two vehicles is highly dynamic and unpredictable, our analysis will provide a fundamental basis of connection-time estimation of V2MR communications. Numerical results obtained from VEINS simulation show that our analysis can estimate the connection time of V2MR communications with the average error below 1.0 percent. Moreover, we show that the average connection time of V2MR communications can be extended to approximately 3.85 times of that of V2R communications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.279-285
• /
• 2017

The study on 'support for V2V(Vehicle to Vehicle) services based on LTE sidelink' has been carried out in 3GPP RAN working group. The conventional LTE sidelink technology is not adequate for high speed V2V communications because the conventional DM-RS(Demodulation Reference signal) structure is developed for pedestrian environment. While the typical speed of pedestrian environment is 3km/h, that of V2V communications is 120 km/h and the information on channel estimation is not sufficient with legacy DM-RS structure. In this paper, improved DM-RS structures for V2V communications that have rapid channel variation are introduced and the performance of channel estimation accuracy is analyzed. Simulation results show that the performance improvement of channel estimation can be achieved based on extended sub-carrier spacing structure resulted from reduced inter-carrier interference. However, the extended sub-carrier spacing requires the longer cyclic prefix and higher overhead. As a results of considerations on DM-RS modification, the sub-carrier spacing is maintained and the high density of DM-RS is applied for V2V communications.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.13-16
• /
• 2015

In any mobile ad hoc environment, collision amongst mobile objects is always likely to occur unless there is a certain level of intelligence to detect and avoid the collision. This phenomenon of detection and avoidance is the key attribute for safety applications in vehicle to pedestrian (V2P) communications systems. In this paper, we propose a V2P communications concept for collision detection and avoidance.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.6
• /
• pp.52-57
• /
• 2009

This paper presents a low-noise low-dropout linear regulator that is suitable for on-chip integration with RF transceiver ICs. In the bandgap reference, a stacked diode structure is adopted for saving silicon area as well as maintaining low output noise characteristic. Theoretical analysis for supporting the approach is also described. The linear regulator is fabricated in $0.18{\mu}m$ CMOS process. It operates with an input voltage range of 2.2 V - 5 V and provide the output voltage of 1.8 V and the output current up to 90 mA. The measured line and load regulation is 0.04%/V and 0.46%, respectively. The output noise voltage is measured to be 479 nV/$^\surd{Hz}$ and 186 nV/$^\surd{Hz}$ from 100 Hz and 1 kHz offset, respectively.

• Information and Communications Magazine
• /
• v.34 no.6
• /
• pp.3-10
• /
• 2017

최근 운전자의 편의성과 안전성 향상을 위한 커넥티드 카 및 자율주행 차량에 대한 관심과 연구가 집중되고 있다. 이러한 커넥티드 카와 자율주행 차량의 경우 대용량의 멀티미디어 전송 및 센서 데이터 공유 등 다양한 서비스를 위해 높은 전송용량과 신뢰성을 보장할 수 있는 vehicle-to-vehicle (V2V) 통신과 vehicle-to- infrastructure (V2I) 통신에 대한 기본적인 연구와 구현이 필수적이다. 이러한 요구사항을 만족시키기 위해서 최근 mmWave 기반의 V2V, V2I에 대한 연구가 큰 주목을 받고 있다. 본고에서는 mmWave 대역 V2V 및 V2I 기술의 필요성과 채널에 관련된 기존 연구를 살펴보고, 이를 기반으로 현재까지 연구된 mmWave 대역 V2V, V2I 관련 연구에 대해 살펴보고자 한다. 또한 기존 연구의 한계점을 확인하고, 향후 연구방향과 주제에 대해 논의하고자 한다.

• Information and Communications Magazine
• /
• v.30 no.11
• /
• pp.3-7
• /
• 2013

V2X 통신 기술은 지능형 자동차와 차세대ITS를 위한 차량과 IT융합 기술이다. 본 논문은V2X 통신의 목적과 기술 개념을 소개하고 미국과 유럽, 일본에서 추진하고 V2X 통신기술의 개발 현황을 소개한다. 아울러 국내에서 추진 되는 V2X 통신 기술개발현황 알아보고 실용화 이슈를 살펴 본다.