• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.3
• /
• pp.43-49
• /
• 2010

Direct printing technology is an attractive metallization method, which has become immerging as "Green technology" to the conventional photolithography, on account of low cost, simple process and environment-friendliness. In order to commercialize the printed electronics in industry, it is essential to evaluate the electrical properties of conductive circuits using direct printing technology. In this contribution, we focused on the electrical characteristics of inkjet-printed circuits. A Cu nanoink was inkjet-printed onto a Bisaleimide triazine(BT) substrate with parallel transmission line(PTL) and coplanar waveguide(CPW) type, then was sintered at $250^{\circ}C$ for 30 min. We calculated the resistivity of printed circuits through direct current resistance by the measurement of I-V curve: the resistivity was approximately 0.558 ${\mu}{\Omega}{\cdot}cm$ which is about 3.3 times that of bulk Cu. Cascade's probe system in the frequency range from 0 to 30 GHz were employed to measure the Scattering parameter(S-parameter) with or without a gap between the substrate and the probe station chuck. The result of measured S-parameter showed that all printed circuits had over 5 dB of return loss in the entire frequency range. In the curve of insertion loss, $S_{21}$, showed that the PTL type circuits had better transmission of radio frequency (RF) than CPW type.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.12
• /
• pp.1712-1720
• /
• 2014

Little is known about the gender differences in energetic requirements of goats in early life. In this study, we determined the energy requirements for maintenance and gain in intact male, castrated male and female Saanen goat kids using the comparative slaughter technique and provide new data on their body composition and energy efficiency. To determine the energy requirements for maintenance, we studied 21 intact males, 15 castrated males and 18 females ($5.0{\pm}0.1kg$ initial body weight (BW) and $23{\pm}5d$ of age) using a split-plot design with the following main factors: three genders (intact males, castrated males, and females) and three dry matter intake levels (ad libitum, 75% and 50% of ad libitum intake). A slaughter group included three kids, one for each nutritional plane, of each gender, and all three animals within a group were slaughtered when the ad libitum kid reached 15 kg in BW. Net energy requirements for gain were obtained for 17 intact males, eight castrated males and 15 females ($5.1{\pm}0.4kg$ BW and $23{\pm}13d$ of age). Animals were fed ad libitum and slaughtered when they reached 5, 10, and 15 kg in BW. A digestion trial was performed with nine kids of each gender to determine digestible energy, metabolizable energy and energy metabolizability of the diet. Our results show no effect of gender on the energy requirements for maintenance and gain, and overall net energy for maintenance was $205.6kJ/kg^{0.75}$ empty body weight gain (EBW) ($170.3kJ/kg^{0.75}$ BW) from 5 to 15 kg BW. Metabolizable energy for maintenance was calculated by iteration, assuming heat production equal to metabolizable energy intake at maintenance, and the result was $294.34kJ/kg^{0.75}$ EBW and $k_m$ of 0.70. As BW increased from 5 to 15 kg for all genders, the net energy required for gain increased from 9.5 to 12.0 kJ/g EBW gain (EWG), and assuming $k_g=0.47$, metabolizable energy for gain ranged from 20.2 to 25.5 kJ/g EWG. Our results indicate that it is not necessary to formulate diets with different energetic content for intact male, castrated male and female Saanen goat kids weighing from 5 to 15 kg.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.10
• /
• pp.1459-1465
• /
• 2013

Two in vitro experiments were conducted to evaluate the effect of methylcellulose (MC) on i) bacterial detachment from rice straw as well as ii) inhibition of bacterial attachment and fiber digestibility. To evaluate the effect of MC on fibrolytic bacterial detachment (Exp 1), in vitro bacterial cultures with 0.1% (w/v) MC solution were compared with cultures without MC after 8 h incubation. The effect of MC on inhibition of bacterial attachment was determined by comparing with real-time PCR the populations of F. succinogenes, R. flavefaciens and R. albus established on rice straw pre-treated with 0.1% MC with those on untreated straw after incubation for 0, 6 and 12 h (Exp 2). The major fibrolytic bacterial attachment on rice straw showed significantly lower populations with either the addition of MC to the culture or pre-treated rice straw compared to controls (p<0.05). Also, the digestibility of rice straw with MC was significantly lower compared with control (p<0.05). The F. succinogenes population did not show detachment from rice straw, but showed an inhibition of attachment and proliferation on rice straw in accordance with a decrease of fiber digestion. The detachments of Ruminococcus species co-existed preventing the proliferations with subsequent reduction of fiber degradation by MC during the incubation. Their detachments were induced from stable colonization as well as the initial adhesion on rice straw by MC in in vitro ruminal fermentation. Furthermore, the detachment of R. albus was more sensitive to MC than was R. flavefaciens. These results showed the certain evidence that attachment of major fibrolytic bacteria had an effect on fiber digestion in the rumen, and each of fibrolytic bacteria, F. succinogenes, R. flavefaciens and R. albus had a specific mechanism of attachment and detachment to fiber.

• Korean Journal of Materials Research
• /
• v.8 no.9
• /
• pp.831-836
• /
• 1998

The B1914 Ni-base superalloy was manufactured according to crystal structures of poly-, directionally solidified- and single crystals. We observe deformation as type of different crystal structure from room to high temperature. Specimens are controled by cooling rate and thermal gradient and then heat treatment in vacuum and then cooling with Ar gas. Different crystal structure has different stress-strain characteristic. At $600^{\circ}C$, yield strength and ultimate strength is increased single-, directionally solidified- and poly crystals in order.

• Journal of Korea Soil Environment Society
• /
• v.3 no.2
• /
• pp.127-145
• /
• 1998

Unlike water or air quality standards that have been established by legislation using potential human health impact as the primary criterion, soil quality depends on the soils primary function and its relevant environmental factors, which is much more site- and soil specific. A properly characterized soil quality assessment system should serve as an indicator of the soil capacity to produce safe and nutritious food, to enhance human and animal health, and to overcome degrative processes. For our proposed example, a high quality soil with regard to maintaining an adequate soil productivity as a food production resources must accommodate soil and water properties, food chain, sustainability and utilization, environment, and profitability, that (i) facilitate water transfer and absorption, (ii) sustain plant growth, (iii) resist physical degradation of soil, (iv) produce a safe food resources, (v) cost-effective agricultural management. Possible soil quality indicators are identified at several levels within the framework for each of these functions. Each indicator is assigned a priority or weight that reflects its relative importance using a multi-objective approach based on principles of systems to be considered. To do this, individual scoring system is differentiated by the several levels from low to very high category or point scoring ranging from 0 to 10, And then weights are multiplied and products are summed to provide an overall soil quality rating based on several physical and chemical indicators. Tlne framework and procedure in developing the soil quality assessment are determined by using information collected from an alternative and conventional farm practices in the regions. The use of an expanded framework for assessing effects of other processes, management practices, or policy issues on soil quality is also considered. To develop one possible form for a soil quality index, we should permit coupling the soil characteristics with assessment system based on soil properties and incoming and resident chemicals. The purpose of this paper is to discuss approaches to defining and assessing soil quality and to suggest the factors to be considered.

• Archives of Plastic Surgery
• /
• v.32 no.1
• /
• pp.12-18
• /
• 2005

The Transverse rectus abdominis musculocutaneous (TRAM) flap has been commonly used for autologous breast reconstruction. Despite these clinical usefulness, the TRAM flap is prone to partial flap or fat necrosis in especially pedicled flap. To improve flap survival, the surgical delay procedures and pharmacological treatments have been developed. In many studies for the pharmacological treatment, Lipo-$PGE_1$ has demonstrated a marked ability to improve flap survival and it's effect has been proved similar to surgical delay procedure. The purpose of this study is to determine the most effective route of Lipo-$PGE_1$ administration as a pharmacological treatment in TRAM flap of the rat. Fifty male Sprague-Dawley rats weighing 300-350 gm were divided into five groups, One week before flap elevation, Lipo-$PGE_1$($2{\mu}g/kg$) was injected three times in a week and than the left inferior epigastric vessel based TRAM flap ($5.0{\times}3.0cm$) elevated; group I: no procedure before flap elevation; group II: intraperitoneal injection; group III: intravenous injection; group IV: subcutaneous injection; group V: topical application. A flap was assessed at postoperative 7 days by comparison of flap survival rate, vessel counts(H-E stain), and vascular endothelial growth factor(VEGF) protein expressed by Western blot. The results demonstrated that the mean percentages of the flap survival area in group III were significantly higher than that of any other group(p<0.05). The vessel counts of all experimental groups were statistically higher than that of control group(p<0.05). Only in group III, the VEGF protein expression was increased significantly than control group and there are no difference in other experimental groups. In conclusion, the intravenous administration of the Lipo-$PGE_1$ is the most effective on flap survival, and the VEGF induced by Lipo-$PGE_1$ has some positive effects on new vessel formation and flap survival.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.1
• /
• pp.65-69
• /
• 1998

In order to evaluate the utility of bituminous coal fly ash, gypsum, oyster shell as soil amendments, aadic clayloam paddy soils with low calaum content were amended in the upper 15㎝ with amendments, and then Chinese cabbage was cultivated under plastic film house. Amendments treated were, in metric tons per hectare, i) none(Check) ; ii) 80 fly ash(FA) ; iii) 4 shell(SH) ; iv) 56 fly ash+24 gypsum (FG) ; v) 40 fly ash+24 gypsum+0.8 shell(FGS). On the whole, soil chemical properties were improved by amendments treatments. Amongst treatments, FA prominently neutralized soil pH and increased contents of Av. $P_2O_5$, Ex. K, and Av. B in soils. Besides, it showed the highest ratio in bacteria/fungi and (bacteria+actinomycetes)/fungi. FGS also affected the neutralization of soil pH and the increment of Ex. Mg. Amendments plants appeared alkaline damages only at early growing stage, but showed positive responses in fresh weight yields : 23% for FGS : 21% for FG : 19 18% for SH. At harvesting, leaves both of FA and FGS plants had higher values in contents of N, P, K, Ca, Mg, Fe, Mn, Zn, B, reduang-sugar, and vitamin-C than of others. In especial, Check plants appeared the heart rot symptoms owing to calaum defiaency differently from amendments plants. Taken together, FGS was an effective combination enable to maximize the utility of fly ash, gypsum, shell as soil amendments, espeaally in cabbage yield and quality.

• Proceedings of the KAIS Fall Conference
• /
• 2005.05a
• /
• pp.159-162
• /
• 2005

전자빔을 이용하던 CRT(Cathode Ray Tube) 모니터에서 픽셀단위의 LCD(Liquid Crystal Display) 디스플레이 사용으로 휴대용 정보처리 장치들은 급속한 발전을 이루게 되었다. 기존의 CRT 모니터에서 전자빔을 사용하던 방식에서 픽셀(Pixel) 단위의 후면발광 디스플레이를 만들면서 CRT 모니터보다 빠른 응답특성을 나타내며 저 전력일 뿐만 아니라 디스플레이의 두께도 줄일 수 있게 되었다. 휴대가 가능한 디스플레이의 발전으로 노트북이나 PDA와 같은 실시간 정보를 활용 및 처리 할 수 있는 방법들을 제시할 수 있었지만 원활한 활용을 위해 더 적은 전력을 사용하는 방법들이 제시되어야 했다. 이에 따라 저 전력 소모, 빠른 응답특성, 넓은 시야각 그리고 경량화가 가능한 디스플레이가 되기 위한 새로운 디스플레이가 선을 보이게 되었다. 현재 차세대 디스플레이로 각광을 받고 있는 디스플레이 소자로는 OLED(Organic Light Emitting Diode)가 있다 이는 LCD 디스플레이가 가지고 있는 단점을 보완하여 우선적으로 높은 색도가 가능하며 후면발광을 사용하지 않고 자체 발광을 하기 때문에 저 전력 소모가 현실화되었다. 또한 디스플레이의 유동성이 가능하여 휘어질 수 있는 특성을 가지고 있다. 그러나 이러한 유기발광 소자의 경우 높은 발광 효율을 위한 구조적 개선이 필요하며 소자의 수명도 개선해야 한다. 이에 따라 유기발광 소자의 메카니즘에 대한 파악이 필요하게 되며 물리적 구조에 대한 이해가 필요하다. 이를 위해 물리적, 수치적 해석으로 소자의 특성을 파악해 줌으로써 개선된 유기발광 소자 제작이 가능 할 것이다.기에 대한 영향정도를 측정하여 정량적으로 도출하였다. 이를 각 구간에 대해 상호 비교 분석함으로써 대형국책사업에서의 공기지연인자에 대한 분석 방법론을 정립하였고 공기지연 분석 방법론의 현실적 적용을 위한 제언과 그에 따른 개선사항에 대해 도출하였다.있는 발판을 마련하게 된다고 추정하였다. 0.5%가 control사이에서 0.95로 가장 색차가 크게 나타났으며, 그 다음이 냉동분쇄 0.5% 0.83으로 나타나 송이의 첨가율이 높을수록 색차가 크게 나타나는 것을 알 수 있다. 색차가 가장 낮은 제품은 법동분쇄 0.3%, 동결건조 0.3%로 나타났다. 송이양갱의 색(color), 냄새(flavor), 맛(taste), 외관(appearances), 질감(viscosity), 종합적 평가(overall acceptability) 등의 관능평가를 실시한 결과 중 색에 대한 기호도는 냉동분쇄 0.1% 송이양갱이 가장 높은 것으로 나타났으나, 집단간 유의한 차이는 나타나지 않았고, 냄새는 동결건조 0.1%의 송이양갱이 3.38로 가장 점수가 높았으며, 냉동분쇄 0.3%의 송이양갱이 2.81로 가장 낮은 기호도를 나타내었다. 맛에서는 p<0.01수준에서 집단간 유의한 차이를 나타내었는데, 동결건조 0.1%가 그 중 가장 높은 기호도를 나타내었으며, 그 다음이 동결건조 0.5%였다. 가장 낮은 선호도를 나타낸 것은 열풍건조 0.5%였다. 질감은 P<.05 수준에서 집단간 유의미한 차이를 나타내었으며 동결건조 0.1%가 가장 높은 기호도를 나타내었으며, 동결건조 0.5%함유 송이양갱이 1.21로서, 현저히 낮은 기호도를 나타내었다. 종합적인 평가에서는 동결건조 0.1%함유

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.5
• /
• pp.590-603
• /
• 2006

Size-and time-resolved aerosol samples were collected using an eight-stage Davis rotating unit for monitoring (DRUM) sampler from 23 March to 29 April 2001 at Gosan, Jeju Island, Korea, which is one of the super sites of Asia-Pacific Regional Aerosol Characterization Experiment(ACE-Asia). These samples were analyzed using synchrotron X-ray fluorescence for 3-hr average concentrations of 19 elements including Al, Si, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Se, Br, Rb, and Pb. The size-resolved data sets were then analyzed using the positive matrix factorization(PMF) technique to identify possible sources and estimate their contributions to particulate matter mass. PMF analysis uses the uncertainty of the measured data to provide an optimal weighting. Twelve sources were resolved in eight size ranges($0.09{\sim}12{\mu}m$) and included continental soil, local soil, sea salt, biomass/biofuel burning, coal combustion, oil combustion, municipal incineration, nonferrous metal source, ferrous metal source, gasoline vehicle, diesel vehicle, and volcanic emission. The PMF result of size-resolved source contributions showed that natural sources represented by local soil, sea salt, continental soil, and volcanic emission contributed about 79% to the predicted primary particulate matter(PM) mass in the coarse size range ($1.15{\sim}12{\mu}m$) while anthropogenic sources such as coal combustion and biomass/biofuel burning contributed about 58% in the fine size range($0.56{\sim}2.5{\mu}m$). The diesel vehicle source contributed mostly in ultra-fine size range($0.09{\sim}0.56{\mu}m$) and was responsible for about 56% of the primary PM mass.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.3
• /
• pp.148-152
• /
• 1989

This field experiment was carried out to determine the effects of fertilizer application time in early spring on growth, dry matter (DM) yield, crude protein (CP) content, crude protein yield (CPY), N recovery, acid detergent fibej (ADF) content and DM digestibility (DMD) of grasses for hay. Application times of fertilizer were March 10, 20, 30, April 9. 19, and control (non-fertilized) plot was involved. The fust harvesting data for hay was May 9 (early heading stage) and the regrowth yields were investigated for soiling, 1989. In all fertilized plots, the growth, DM yield, CP, CPY and N recovery of grasses were significantly increased compared with control, and the best grass growth, DM yield, CP, CPY, N recovery and DMD were observed on March 20 and 30 among all fertilized plots. On March 20 and 30 in this experiment, the accumulated temperature was 200 and 280^{\circ}C.$, and the subsoil temperature at 10 cm depth was 8 and 10^{\circ}C.$. Considering the average meteorological condition in Suwon area, the optimum application time of early spring for hay may be recommended from April 10 to 15. i\ulcornerfW3U% (L. westock Experiment Station, RDA. Suwon 440 - 350. Korea)