• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.212-212
• /
• 2014

0.04% Gd-duplex stainless steels (Gd-DSTSs) for neutron absorbing materials were inert arc-melted and poured into a Y-shape block with the size of $100{\times}100{\times}20[mm]$. The Gd-DSTS was hot rolled at $1200^{\circ}C$ followed by cold rolling to have 33% reduction. The average grain sizes of the rolling (RD), transverse (TD) and short transverse (ST) directions were 6, 7, $11{\mu}m$, respectively. The micro-hardnesses of the RD, TD and ST directions were 258.5, 292.3, 314.7 $H_V$, respectively. Corrosion potential and corrosion rate of the cold rolled Gd-duplex stainless steel in aerated artificial sea water and 0.1M $H_2SO_4$ solution were $0.2216V_{SHE}$, $0.0106A/cm^2$, $-0.0825V_{SHE}$, $0.0168A/cm^2$ for RD, $0.2210V_{SHE}$, $0.0077A/cm^2$, $0.0817V_{SHE}$, $0.0092A/cm^2$ for TD, $0.1056V_{SHE}$, $0.0059A/cm^2$, $0.0475V_{SHE}$, $0.0069A/cm^2$ for ST, respectively. The corrosion behavior depended on the texture, which were due to mainly grain boundary and minorly crystallographic texture. Friction coefficient and wear resistance were 2.07 and 0.48 mm, respectively.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.2
• /
• pp.51-63
• /
• 2019

Purpose: Radiation therapy for breast cancer should consider the change in breast shape due to breathing and swelling. In this study, we evaluate the benefit of using virtual bolus for IMRT of left breast cancer. Materials and methods: 10 patients with early breast cancer who received radiation therapy after breastconserving surgery compared the VMAT and IMRT plans using the virtual bolus method and without using it. The first analysis compared the V95%, HI, CI of treatment volume, Dmean, V5, V20, V30 of ipsilateral lung, and Dmean of heart in VMAT plan made using the virtual bolus method(VMAT_VB) to the plan without using it(VMAT_NoVB) in case there is no change in the breast. In IMRT, the same method was used. The second analysis compared TCP and NTCP based on each treatment plan in case there is 1cm expansion of treatment volume. Result: If there is no change in breast, V95% in VB Plan(VMAT_VB, IMRT_VB) and NoVB Plan(VMAT_NoVB, IMRT_NoVB) is all over 99% on each treatment plan. V95% in VMAT_NoVB and VMAT_VB is 99.80±0.17% and 99.75±0.12%, V95% in IMRT_NoVB and IMRT_VB is 99.67±0.26% and 99.51±0.15%. Difference of HI, CI is within 3%. OAR dose in VB plan is a little high than NoVB plan, and did not exceed guidelines. If there is 1cm change in breast, VMAT_NoVB and IMRT_NoVB are less effective for treatment. But VMAT_VB and IMRT_VB continue similar treatment effect compared in case no variation of breast. Conclusion: This study confirms the benefit of using a virtual bolus during VMAT and IMRT to compensate potential breast shape modification.

• Computers and Concrete
• /
• v.17 no.1
• /
• pp.107-127
• /
• 2016

Concrete is a heterogeneous material containing many weaknesses such as micro-cracks, pores and grain boundaries. The crack growth mechanism and failure behavior of concrete structures depend on the plastic deformation created by these weaknesses. In this article the non-linear finite element method is used to analyze the effect of presence of micro pore near a crack tip on both of the characteristics of crack tip plastic zone (its shape and size) and crack growth properties (such as crack growth length and crack initiation angle) under pure shear loading. The FE Code Franc2D/L is used to carry out these objectives. The effects of the crack-pore configurations and the spacing between micro pore and pre-excising crack tip on the characteristics of crack tip plastic zone and crack growth properties is highlighted. Based on the obtained results, the relative distance between the crack tip and the micro pore affects in very significant way the shape and the size of the crack tip plastic zone. Furthermore, crack growth length and crack initiation angle are mostly influenced by size and shape of plastic zone ahead of crack tip. Also the effects of pore decrease on the crack tip by variation of pore situation from linear to perpendicular configuration. The critical position for a micro pore is in front of the crack tip.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.308-311
• /
• 2004

In this paper, we investigated $\phi-q-n$ distribution to inquire discharge characteristic according to variation of electrode. Also, we investigated Weible distribution of discharge number using Weible analysis to search the relationship between a part discharge and shape of electrode. We increased voltage 1[kV] AC 60[Hz] of impressed voltage, data is acquired a generating discharge for 10 seconds after impressing voltage. Also, as we repeated the experiment 10 times at same condition, analyzed foible using data except for maximum and minimum. As the result, we confirmed that discharge generating and discharge quantity were significantly increased narrowing radius of electrode, also discharge frequency was close to shape of a standard distribution.

• Journal of the Korean Society of Costume
• /
• v.44
• /
• pp.117-129
• /
• 1999

Hudan Bangryung-Banbee was the name for a traditional dress which had a square neckline collar. Among Bangryung-Banbee, there was a particular style which, plus with the square neckline collar, had the half-length sleeve, bodice whose back length was shorter than the front. This kind of style shown a big difference from the typical pattern of traditional Korean costumes which had the V neck and had to fold the neckband of the clothes in Y-shape. This study focused on the analysis of the change of Hudan(後短) Bangryung-Banbee style. Bangryung-Banbee of the half sleeve/shortened back style had been usually excavated around the period of the Japanese invasion of Chosun dynasty(1592-1598). And up to now this kind of the costumes was never found before the fifteenth century or after the eighteenth century in Korea. Therefore it is thought that Bangryung-Banbee was worn widely in the middle of the Chosun dynasty. However, the shape of the collar and the length of sleeve and of dress were variously used, so it must be recognized that there existed much more diverse styles of Bangryung-Banbee than it was known today. But as the times passed away, the lined Bangryung-Banbee disappeared, and the collar of Bangryung-Banbee changed from square neckline to rounded Wonsam(圓衫) or Baeja(背子)-shape. And in the case of Bangryung-Banbee's front length, the original style disappeared, while a new style of longer back appeared.

• Journal of the Korean Society of Safety
• /
• v.21 no.1 s.73
• /
• pp.53-58
• /
• 2006

This paper has been addressed on the discharge characteristics of the ignition coil by Weibull function. It analyzed discharge number and amount of discharge using Weibull distribution to know the inter-relationship between partial discharge and mileage. We detected the discharge which happens for 10 seconds. The applied voltage increased by 0.5[kV] at discharge inception voltage. We diagnosed failure rate using the shape parameters. As a result, we confirmed that the failure rate was increased, because the shape parameter showed the value of 5 according to increasing mileage degradation. Also, it is considered to increase the degradation of inner insulator of ignition coil. Because failure rate of virgin was increased from 0[%] to 25[%] after degradation, stability analysis of the ignition coil using Weibull analysis is possible.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.29 no.4
• /
• pp.292-300
• /
• 1993

Acoustical imaging has made brilliant progress in the medical science field, and has also made much progress in the nondestructive testing and under water acoustics applications since doctor Dussik brother has studied about possibilities of making images of brain by recording variations in the intensity of ultrasonic beam from head in 1937. In this paper an acoustical image is reconstructed with the power spectra analysed by impulse ultrasound wave generated by electrodynamic transducer(EDT). The EDT generates the impulse ultrasound of 77KHz in center frequency and 120KHz in bandwidth at -20dB by 1200V exciter in this experiment. The impulse ultrasound has the dominant frequency components of 47KHz, 177KHz, 110KHz and 155KHz. The U shape object is adopted in making an acoustical image. The resulted spectral acoustical images are different from the optical view of the U shape object. However the image reconstructed from 110KHz spectrum is very similar to the original optical shape of the object. Even KHz level impulse sound of 70$\mu$sec pulse width is found to be useful in reconstructing acoustical imaging improvement.

• The Research Journal of the Costume Culture
• /
• v.25 no.3
• /
• pp.340-358
• /
• 2017

The purpose of this study is to fundamentally examine the vests of the robes "Daeraebok" and "Soraebok" of the Korean Empire from the 1876 Port Opening to the 1910 annexation of Korea to Japan. Among the collections of different robes of the Korean Empire which belong to various universities and institutions, only the vests were surveyed. The shape of the vests in the Korean Empire were single-breasted and double-breasted. Most V-necklines and vests with a shawl collar look like a tailored collar, where the collar outline was shaped like a notched and picked collar, which is a mix of the step collar and roll collar of the 19th century. The rear center line was not flat, but inclined to a triangle. All vests of the robe Daeraebok were equipped with gold buttons, and those of the robe Soraebok had black satin buttons. The tailoring characteristic is that the front has a different material (dark black wool) from the back (black silk). This characteristic is expected to be an important basic piece of information in the restoration and reproduction of the vest, which was worn during the imperial period, especially to reveal its shape, characteristics and composition. This characteristic can also be used as data of cultural contents based on Korean modern history.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.5
• /
• pp.441-447
• /
• 2003

When a SnO$_2$ thin film was deposited by thermal CVD, two different types of growth behavior that were dependent on the deposition temperature were observed. The film grown at 475$^{\circ}C$ had a wide grain size distribution and a faceted surface shape. On the other hand, the film grown at 5$25^{\circ}C$ had a relatively narrow grain size distribution and a rounded sulfate shape. The aspects of grain shape and growth behavior agree well with the theory of gram growth and a roughening transition. The charge tarrier density decreased with deposition time. According to photoluminescence measurements, the peak intensity of the spectra occurred at approximately 2.5 eV, which is related to oxygen vacancies, and decreased with increasing of deposition time. These measurement results suggest that the number of oxygen vacancies, which is related to the electrical conductivity, decrease with deposition time.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.5
• /
• pp.741-751
• /
• 2009

In order to design and develop the various silhouette of pants pattern for standardized pants patterns, this study is to classify the pants style by the silhouette and to characterize each pants pattern which are classified. Recent 37 ready-made pants patterns of various style were collected in order to analyze their silhouette from April to July 2007. Measurement of each region of the pants pattern were compared and analysed. After analyse the standard deviation, coefficient of variance, minimum, maximum, range about the measurement of each region of the pants pattern, major pattern design factors were extracted. Five major factors are the angle of center front line and center back line, the crotch extension, the position of center back line against center front line, the curvature of center back line, and amount of waist dart. As a result, pants style were grouped as the culottes, formal, basic and tight style after considering the extracted design factors, and analysing correlation, degree of dispersion of the measurement by part. As the silhouette of pants classification from culotte to tight, the fits are closer to the figure, crotch depth increases, crotch extensions are shorter, and angle of the center back increases. The shape of the connected front and back center lines is U-shape for culotte and is closer to V-shape as the silhouette becomes tight.