• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.3
• /
• pp.409-421
• /
• 2012

Ethanolamine (ETA) is mainly used to prevent corrosion of pipe in secondary cooling system of nuclear power plant. Condensed ETA in wastewater could increase COD and T-N when it was emitted to natural water system. Compared to conventional treatments, electrochemical oxidation process using packed bed bipolar electrodes was adopted to treat COD and T-N. According to arrangement of feeder electrode, single packed bed bipolar electrode reactor and multi-paired packed bed bipolar reactor were developed and conventional zero-valent iron (ZVI) was selected as conducting bipolar electrode. Bipolar electrodes were coordinated three-dimensionally in the reactor. The experimental results showed that COD and T-N was little removed in unit system at different pH condition (pH 8 and 11) on 100V. However, in multi-paired system that applied 600V, COD was eliminated 80.85% (anode-cathode-anode, A-C-A) and 85.11% (cathode-anode-cathode, C-A-C), respectively. T-N was also removed 96.88% (A-C-A) and 90.63% (C-A-C), simultaneously. Current efficiency was estimated both single and multi-paired system. At unit bipolar packed bed reactor, current efficiency was almost zero, however in multi-paired system, current efficiency was 300~500% at A-C-A and 250~350% at C-A-C. Current efficiency was over 100% hence it was confirmed that this system is more effective than conventional electrochemical oxidation system.

• Journal of Environmental Science International
• /
• v.30 no.5
• /
• pp.407-412
• /
• 2021

This study aims to present basic data on long-term sexual effects of Savory (Satureja hortensis) by analyzing its zinc and V.B3 contents. These contents result in the activation of sexual functions induced by the blood concentration of sex hormones, thus improving menopauale symptoms. Results were obtained on August 20, 2020 after experimenting with 100 g of the herb from six indoor (green-house) experimental plots. The V.B3 results were analyzed using 100 g of Savory planted in open soil. Zinc had the highest values at 2.161 mg from the bed soil compounded with sapolite and poultry manure in the indoor condition and 2.077 mg from bed soil mixed with clay in the outdoor condition. The presence of V.B3 in Savory was also confirmed. Further research should be conducted on the interactions between Savory and other herbs.

• Journal of Powder Materials
• /
• v.29 no.2
• /
• pp.99-109
• /
• 2022

Powder flowability is critical in additive manufacturing processes, especially for laser powder bed fusion. Many powder features, such as powder size distribution, particle shape, surface roughness, and chemical composition, simultaneously affect the flow properties of a powder; however, the individual effect of each factor on powder flowability has not been comprehensively evaluated. In this study, the impact of particle shape (sphericity) on the rheological properties of Ti-6Al-4V powder is quantified using an FT4 powder rheometer. Dynamic image analysis is conducted on plasma-atomized (PA) and gas-atomized (GA) powders to evaluate their particle sphericity. PA and GA powders exhibit negligible differences in compressibility and permeability tests, but GA powder shows more cohesive behavior, especially in a dynamic state, because lower particle sphericity facilitates interaction between particles during the powder flow. These results provide guidelines for the manufacturing of advanced metal powders with excellent powder flowability for laser powder bed fusion.

• Journal of Powder Materials
• /
• v.28 no.5
• /
• pp.410-416
• /
• 2021

Ti-6Al-4V alloy has a wide range of applications, ranging from turbine blades that require smooth surfaces for aerodynamic purposes to biomedical implants, where a certain surface roughness promotes biomedical compatibility. Therefore, it would be advantageous if the high volumetric density is maintained while controlling the surface roughness during the LPBF of Ti-6Al-4V. In this study, the volumetric energy density is varied by independently changing the laser power and scan speed to document the changes in the relative sample density and surface roughness. The results where the energy density is similar but the process parameters are different are compared. For comparable energy density but higher laser power and scan speed, the relative density remained similar at approximately 99%. However, the surface roughness varies, and the maximum increase rate is approximately 172%. To investigate the cause of the increased surface roughness, a nonlinear finite element heat transfer analysis is performed to compare the maximum temperature, cooling rate, and lifetime of the melt pool with different process parameters.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.741-746
• /
• 2006

Future space is currently getting a great deal of attention to apply ubiquitous computing technology. At the same time, various ubiquitous technology-based products are being developed with service scenarios in the views of diverse user groups predicted. Since these service models and scenarios need to be tested to verify effectiveness, it requires researchers to predict spatial shapes and service scenarios for future domestic environment that fulfills diverse future spatial requirements including ecological and user-oriented spaces, extended amenity getting maximum benefits from technology, etc. To support these developments, the need to make a physical test-bed, a real building model, is essential. However building a physical test-bed generally is economically expensive and even if the test-bed could be settled, it must be carefully designed before it is built In this paper, we suggest a virtual smart test-bed, called "V-PlaceLab", using virtual reality techniques. This system allows not only to inspect a scenario with the aid of computer simulation on a virtual environment, but also to design a virtual test-bed mentioned above.

• Journal of the Korean Society of Safety
• /
• v.16 no.3
• /
• pp.41-44
• /
• 2001

The removal characteristics of nitrogen oxides (NOx) by the dielectric ($Al_2O_3$) packed-bed plasma reactor are experimentally investigated Reactor is packed with 5[mm] diameter $Al_2O_3$ beads, and was desisted to remove NOx at atmospheric pressures from the moving pollution source such as diesel automobile. The experiments were conducted for applied voltages from 5 to 10[kV], flue gas rate from 2 to 5[l/min] and frequency from 0.5 to 2[kHz]. The NOx removal efficiency significantly increasing with increasing applied voltage. Especially removal rate significantly increased with increasing frequency. However, in this experiment discharged poler n relatively high.

• Parasites, Hosts and Diseases
• /
• v.58 no.1
• /
• pp.99-102
• /
• 2020

Two-point mutations (V419L and L925I) on the voltage-sensitive sodium channel of bed bugs (Cimex lectularius) are known to confer pyrethroid resistance. To determine the status of pyrethroid resistance in bed bugs in Korea, resistance allele frequencies of bed bug strains collected from several US military installations in Korea and Mokpo, Jeollanamdo, from 2009-2019 were monitored using a quantitative sequencing. Most bed bugs were determined to have both of the point mutations except a few specimens, collected in 2009, 2012 and 2014, having only a single point mutation (L925I). No susceptible allele was observed in any of the bed bugs examined, suggesting that pyrethroid resistance in bed bug populations in Korea has reached a serious level. Large scale monitoring is required to increase our knowledge on the distribution and prevalence of pyrethroid resistance in bed bug populations in Korea. Based on present study, it is urgent to restrict the use of pyrethroids and to introduce effective alternative insecticides. A nation-wide monitoring program to determine the pyrethroid resistance level in bed bugs and to select alternative insecticides should be implemented.

• Korean Journal of Ecology and Environment
• /
• v.35 no.2 s.98
• /
• pp.103-110
• /
• 2002

Seasonal changes of the phytoplankton community was investigated from July 2000 to April 2001 at the river bed lake, Jangjwa Lake in the Imjin River, which appeared to be the most natural condition. A total of phytoplankton were composed of 112 taxa, belonging to 5 divisions,83 species, 10 varieties,1 variety-form, 1 form and 17 unidentified species. Of those, the green algae and the diatoms were present during the investigation periods more frequently then the other taxa. The phytoplantton standing crops varied from $2,943{\times}10^3\;cells/l$ on April 2001 to $5,742{\times}10^3\;cells/l$ on January 2001. The phytoplankton standing crops had a continuous high value over $3,000{\times}10^3\;cells/l$ during the investigated periods and showed the highest value during winter period. The major dominant species were Aulacoseira granulata, Chlamydomonas nivalis v. kobayasii, Dinobryon sertularia, Mougeotia so. and Uroglenopsis americana. Among those, Chlamydomonas nivalis v. kobayasii was a major dominant species during winter period.

• KSBB Journal
• /
• v.10 no.2
• /
• pp.159-165
• /
• 1995

Methyl fructoside was continuously produced in suspended bed enzyme reactor using alginate-enclosed microspheres biocatalyst which was developed for enzymatic synthesis of methyl fructoside. And the continuous operating conditions were optimized with reactor simulation in order to demonstrate a feasibility of commercialization of the continuous enzymatic production process development. The yield and productivity of methyl fructoside were as high as 47.1%o and $2g/\ell$-hr, respectively. The optimum operating conditions were pH 4.8, 30%(v/v) of methanol content and $2U/m\ell$ of enzyme activity when the initial concentration of sucrose is $0.291mo1/\ell$ at the reaction temperature of $25^{\circ}C$.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.6
• /
• pp.1349-1356
• /
• 1994

The results of laboratory experiments on the clear-water scour of cohesionless bed sediment for three types of pier shape were presented. According to the experimental data, the local scouring around the pier was initiated at $V/V_c=0.4{\sim}0.5$ and $Fr_p{\fallingdotseq}0.2$, and the relative local scour depths linearly increased with respect to the velocity ratio and the pier Froude number. The relative scour depth had the linear relationship with ${\tau}_r$ for ${\tau}_r$ < $10^{-4}$, but it tends to become constant for ${\tau}_r$ > $10^{-4}$, irrespective of ${\tau}_r$. And also the relative scour depths showed the close relationship with both the geometric standard deviation and the pier shape.