• Advances in concrete construction
• /
• 제12권6호
• /
• pp.479-490
• /
• 2021

Present research is mainly focused on, microstructural and durability analysis of Graphene Oxide (GO) in Wollastonite (WO) induced cement mortar with silica fume. The study was conducted by evaluating the mechanical properties (compressive and flexural strength), durability properties (water absorption, sorptivity and sulphate resistance) and microstructural analysis by SEM. Cement mortar mix prepared by replacing 10% ordinary portland cement with SF was considered as the control mix. Wollastonite replacement level varied from 0 to 20% by weight of cement. The optimum replacement of wollastonite was found to be 15% and this was followed by four sets of mortar specimens with varying substitution levels of cementitious material with GO at dosage rates of 0.1%, 0.2%, 0.3% and 0.4% by weight. The results indicated that the addition of up to 15%WO and 0.3% GO improves the hydration process and increase the compressive strength and flexural strength of the mortar due to the pore volume reduction, thereby strengthening the mortar mix. The resistance to water penetration and sulphate attack of mortar mixes were generally improved with the dosage of GO in presence of 15% Wollastonite and 10% silica fume content in the mortar mix. Furthermore, FE-SEM test results showed that the WO influences the lattice framework of the cement hydration products increasing the bonding between silica fume particles and cement. The optimum mix containing 0.3% GO with 15% WO replacement exhibited extensive C-S-H formation along with a uniform densified structure indicating that calcium meta-silicate has filled the pores.

• Progress in Superconductivity
• /
• 제3권1호
• /
• pp.130-133
• /
• 2001

A multifilamentary Bi-2223 HTS tape for superconducting power applications was studied through the fabrication of 250-meter long tapes by the PIT(powder in tube) process. To fabricate continuous long wire, a drawing machine, a two-drum bull block and a rolled tape winding machine were developed. Especially, 250-meter long tapes were heat treated in the shape of pancake coil to reduce the heat affect zone and to achieve the high critical current. Engineering critical current density was improved through both the enhancements of critical current density by control of thermal process and the increase of filling factor by using thin Ag alloy sheath tubes less than 1.5 mm in thickness. We have made successfully 250-meter long 37 filamentary tapes with high filling factor up to 31 % employing the modified drawing and rolling technique. The critical current of 250-meter long tapes with pancake coil type was measured by transport method at self-field up to 250 gauss of center field. The measured values, based on the transport critical current at self-field, $I_{c}$ -B characteristics and magnetic field analysis, are 34 A of I$_{c}$ and 4.0 $kA/\textrm{cm}^2$ of $J_{e}$ at 250 m, 77 K, and 0 T. We also have achieved the 56 A of I$_{c}$ and 7.0 $0 kA/\textrm{cm}^2$ of$ J_{e}$ in short tapes at 77K, self-field, and 1$mutextrm{V}$/cm.

• Advances in nano research
• /
• 제15권6호
• /
• pp.495-511
• /
• 2023

In this research, the impact of micro-silica, nano-silica, and polypropylene fibers on the fracture energy of self-compacting concrete was thoroughly examined. Enhancing the fracture energy is very important to increase the crack propagation resistance. The study focused on evaluating the self-compacting properties of the concrete through various tests, including J-ring, V-funnel, slump flow, and T50 tests. Additionally, the mechanical properties of the concrete, such as compressive and tensile strengths, modulus of elasticity, and fracture parameters were investigated on hardened specimens after 28 days. The results demonstrated that the incorporation of micro-silica and nano-silica not only decreased the rheological aspects of self-compacting concrete but also significantly enhanced its mechanical properties, particularly the compressive strength. On the other hand, the inclusion of polypropylene fibers had a positive impact on fracture parameters, tensile strength, and flexural strength of the specimens. Utilizing the response surface method, the relationship between micro-silica, nano-silica, and fibers was established. The optimal combination for achieving the highest compressive strength was found to be 5% micro-silica, 0.75% nano-silica, and 0.1% fibers. Furthermore, for obtaining the best mixture with superior tensile strength, flexural strength, modulus of elasticity, and fracture energy, the ideal proportion was determined as 5% micro-silica, 0.75% nano-silica, and 0.15% fibers. Compared to the control mixture, the aforementioned parameters showed significant improvements of 26.3%, 30.3%, 34.3%, and 34.3%, respectively. In order to accurately model the tensile cracking of concrete, the authors used softening curves derived from an inverse algorithm proposed by them. This method allowed for a precise and detailed analysis of the concrete under tensile stress. This study explores the effects of micro-silica, nano-silica, and polypropylene fibers on self-compacting concrete and shows their influences on the fracture energy and various mechanical properties of the concrete. The results offer valuable insights for optimizing the concrete mix to achieve desired strength and performance characteristics.

• 복식
• /
• 제59권3호
• /
• pp.109-130
• /
• 2009

This study examines the rotor characteristics of Guybang culture (women's living in Joseon) relics which the life images and mental world of women in Joseon if expressed to prepare rotor data to be utilized in modern design and information for color identity establishment of Korean women culture. The result of this study is as following: 1. From 176 pieces of relic photos, total of 1380 color chips were extracted. For color analysis, 1368 units (99.1%) of color data excluding achromatic 12 units (0.9%) among 1380 units of colors were used. With the standard of 10 color wheel of Munsell Color System, the result of studying distributions according to frequency, red was the highest by 25.9%, yellow was 21.4% in women's goods in Joseon period which the ratio of red and yellow was 473%. Other than that, GY 14.6%, YR 11.3% and RP 11.1% followed next which is studied that the warm colors that conveys enjoyable and glamorous feelings composed 84.3%; 2. As a result of tone analysis, high value low chroma ltg color showed highest distribution of 20% and d was 12.2%, b was 11.7% and sf was 8.8%. Generally, it showed high frequency in high value cocors such as ltg, sf and b of 40.5%t and in low chroma (ltg) and medium chroma (d, sf) of 41% and colors in bright and calm image was used the most. 3. As a result of analyzing relationship between hue & tone, the ltg tone of Y close to white in traditional color sensibility showed the highest frequency of 9.6% and ltg tone of GY(6.4%), b tone of RP(6.1%), and v(5.4%), b(5.4%), dp(5.3%) of R followed next. 4. As a result of analyzing the characteristics of coloring, it showed that in case of coloring contrasting hues, it is adjusted similar tones and in case of coloring less contrasting hue, the difference in tone is adjusted to be rather large to make harmonized coloring. Moreover, in case of coloring similar hues, the ratio of using same tone and similar tone was large which the coloring of calm image and dynamic image is all used.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권10호
• /
• pp.1437-1449
• /
• 2006

Thirty six pre-weaned Barbari kids at 4 months age were reared on four rations computed using coarse cereal grains and by-products of pulses and oil seeds with Crude Protein (CP) and Total Digestible Nutrients (TDN) of 12 and 55% (Low protein Low energy); 12 and 60% (Low protein High energy); 14 and 55% (High protein Low energy); and 14 and 60% (High protein High energy), respectively. After 180 days on feed, male animals ($4{\times}5=20$) were slaughtered to study the effect of diet on carcass characteristics and meat quality. To asses the effect, if any, of such diet on product quality, meat balls were prepared and evaluated for quality changes when fresh as well as during storage ($-20{\pm}1^{\circ}C$). Feeding a ration with CP12 and TDN 60% (LH) to kids produced animals with highest slaughter weight (20.3 kg) yielding higher carcass weight and dressing percentage, lean (65.6%) and fat (6.6%) contents with low bone and trim losses. Although total variety meat yield was markedly higher in HL, the non-carcass fat deposition was relatively higher in LH carcasses. The water activity ($a_w$) of fresh goat meat ranged from 0.994-0.995 and total cholesterol 72.8-90.5 mg/100 g meat. The pH was high in HL and HH meat resulting in decreased ($p{\leq}0.05$) extract release volume (ERV). Meat balls were prepared using meat obtained from goats fed different rations (treatments) and stored at $-20{\pm}1^{\circ}C$. They were evaluated on day 0 and months 1, 2, 3, 4 for physicochemical, microbiological and organoleptic changes. Overall moisture (%), $a_w$, TBA number and pH value were 67.9, 0.987, 0.17, 6.6 respectively and were not affected by treatments except pH that was significantly ($p{\leq}0.01$) lower on LH. As the storage period advanced moisture, pH, $a_w$ and TBA number increased irrespective of treatments. Feeding various diets had no marked effect on microbial load of meat balls but with increasing storage period Standard Plate Count (SPC) and psychrotrophs declined ($p{\leq}0.01$). Treatment LL and LH produced meat balls with better flavour.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.430-430
• /
• 2007

In general, polyimides (PIs) are used in liquid crystal displays (LCDs) as alignment layer of liquid crystals (LCs). Up to date, the rubbing alignment technique has been widely used to align liquid crystals on the PI surface, which is suitable for mass-production of LCDs because of its simple process and high productivity. However, this method has some disadvantages. Rubbed PI surfaces include the debris left by the cloth and the generation of electrostatic charges during rubbing process. Therefore, rubbing-free techniques for LC alignment are strongly required in LCD technology. In this experiment, PI was uniformly coated on indium-tin-oxide electrode substrates to form LC alignment layers using a spin-coating method and the PI layers were subsequently imidized at 433 K for 1 h. The thickness of the PI layer was set at 50 nm. The LC alignment layer surfaces were exposed to an $Ar^+$ ion-beam under various ion-beam energies. The antiparallel cells and twisted-nematic (TN) cells for the measurement of pretile angle and electro-optical characteristics were fabricated with the cell gap of 60 and $5\;{\mu}m$, respectively. The LC cells were filled with nematic LC (NLC, MJ001929, Merck) and were assembled. The NLC alignment capability on ion-beam-treated PI was observed using photomicroscope and the pretilt angle of the NLC was measured by the crystal-rotation method at room temperature. Voltage-transmittance (V-T) and response time characteristics of the ion-beam irradiated TN cell were measured by a LCD evaluation system.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권1호
• /
• pp.42-47
• /
• 2005

The possibility of using Moringa oleifera as a ruminant protein supplement was investigated by comparison between nutritive and anti-nutritive value of its different morphological parts with that of conventionally used Leucaena leucocephala leaf meal (LL). Parameters determined were chemical composition, rumen degradable protein (RDP), acid detergent insoluble protein (ADIP), pepsin soluble protein (PESP), non-protein nitrogen (NPN) total soluble protein (TSP) and protein potentially digested in the intestine (PDI). Total phenols (TP) and total extractable tannins (TET) were also evaluated as anti-nutritive factors. In vitro gas production characteristics were measured and organic matter digestibility (OMD) was estimated basing on 24 h-gas production. Crude protein content ranged from 265-308 g/kg DM in M. oleifera leaves (MOL) and seed cake (MOC) respectively. Leucaena leucocephala and Moringa oleifera soft twigs and leaves (MOLSTL) had CP content of 236 and 195 g/kg DM while Moringa oleifera soft twigs alone (MOST) and Moringa oleifera bucks (MOB) had 160, 114 and 69.3 g/kg DM respectively. RDP was highest in (MOC) (181 g/kg DM) followed by (MOL) (177 g/kg DM) and was lowest in MOB (40 g/kg DM). The proportion of the protein that was not available to the animal (ADIP) was (p<0.05) higher in MOL and MOC (72 and 73 g/kg DM) respectively and lowest in LL (29 g/kg DM). The PDI was high in LL (74 g/kg DM) followed by MOC (55 g/kg DM) then MOL (16 g/kg DM). PESP was highest (p<0.05) in MOC followed by MOL then LL (273, 200 and 163 g/kg DM respectively). MOC exhibited highest NPN content (116 g/kg DM) and was lowest in MOB (18 g/kg DM) (p<0.05). Highly (p<0.05) TSP was observed in MOC and MOL (308 and 265 g/kg DM respectively) followed by LL (236 g/kg DM). MOL had negligible TET (20 g/kg DM) when compared with about 70 g/kg DM in LL. Highly (p<0.05) b and a+b values were observed for MOLSTL (602 and 691 g/kg DM respectively) followed by MOL (490 and 538 g/kg DM). Highest c value was observed in MOSTL followed by MOC and MOL (0.064, 0.056 and 0.053 rate/hour) respectively. OMD was highest (p<0.05) for MOSTL followed by MOC and then MOL (579, 579 and 562 g/kg DM respectively). LL exhibited lower (p<0.05) OMD (467 g/kg DM). It was concluded from this study that the high crude protein content in MOL and MOLST could be well utilized by ruminant animals and increase animal performance however, high proportion of unavailable protein to the lower gut of animals and high rumen degradable protein due to negligible tannin content render it a relatively poor protein supplement for ruminants. MOC can be a best alternative protein supplement to leaves and leaves and soft twigs for ruminants.

• 센서학회지
• /
• 제4권4호
• /
• pp.1-9
• /
• 1995

반지름이 1.25 cm인 구형 BGO 섬광 검출기의 감마선 검출 특성을 결정하기 위하여 감마선 에너지 deposition 스펙트럼을 Monte Calro법으로 계산하였다. 이때 계산에 이용된 감마선 에너지 deposition 스펙트럼 계산 code는 personal computer 에서 사용할 수 있도록 qbasic을 이용하여 작성하였다. 또한 직접 제작된 구형 BGO 섬광 검출기를 이용하여 방사성 선원 $^{22}Na$, $^{137}Cs$ 및 $^{207}Bi$ 의 감마선 에너지 스펙트럼도 측정하였다. 이 측정 감마선 에너지 스펙트럼의 광전 peak을 Gauss함수로 fitting하여, 광전 peak의 표준편차를 구하고, 이를 Nardi의 경험식을 이용하여 $X^{2}$ fitting하므로서 2000 keV이하의 감마선 에너지에서 구형 BGO 섬광 검출기의 분해능에 대한 에너지 의존성도 조사하였다. 이를 이용하여 에너지 deposition 계산 스펙트럼을 펼치므로서 $^{22}Na$ 및 $^{137}Cs$의 측정 에너지 스펙트럼과 비교하였다. 또한 감마선 에너지 deposition 스펙트럼 계산 code를 이용하여 반지름이 1.25 cm인 구형 BGO 검출기에 대한 절대효율과 고유 peak 효율도 계산하였다.

• 한국진공학회지
• /
• 제22권3호
• /
• pp.156-161
• /
• 2013

연속적인 1차원의 나노섬유를 제작하는데 빠르고 효과적인 방법인 전기방사법을 이용하여 Ag 나노섬유로 이루어진 투명전극을 제작하고 그 특성을 측정하였다. 전기방사를 통해 제조된 Ag 나노섬유는 큰 종횡비를 갖게 되며 열처리를 통해 생성된 섬유사이의 fused junction이 접촉저항을 낮추어 전기적 특성을 향상시킨다. Ag/고분자 용액을 졸-겔 방법을 이용하여 제조한 후 glass 기판위에 방사시켜 Ag/고분자 나노섬유 구조체를 제작하고 $200{\sim}500^{\circ}C$, 2시간 열처리하여 고분자가 일정부분 제거되고 전도성이 향상된 Ag 나노섬유 투명전극을 제조하였다. Ag 나노섬유의 모폴로지를 FE-SEM을 통해 확인하였고 Ag 나노섬유 투명전극의 투과도와 면저항을 UV-vis-NIR spectroscopy와 I-V특성 측정장치를 사용하여 측정하였다. 투과도 83%에서 면저항 $250{\Omega}/sq$의 투명전극을 제작하였으며 전도성필름에 적합한 수준이다. Ag 나노섬유로 이루어진 투명 전극은 전기적, 광학적, 기계적 특성이 우수하여 차세대 유연 디스플레이에 적용 가능성을 보여준다.

• Journal of Pharmaceutical Investigation
• /
• 제36권6호
• /
• pp.377-383
• /
• 2006

The purpose of the present study was to examine the pharmacokinetic characteristics of arsenic hexaoxide($As_4O_6$), a novel anticancer compound, after i.v. bolus and oral administration in rats. We developed an ICP-Mass based method to analyze arsenic hexaoxide levels in plasma, bile, urine, feces, and tissue and validated the method. Arsenic hexaoxide rapidly disappeared from the plasma by 10 min($\alpha$ phase) after i.v. administration, which was followed by the late disappearance in the $\beta$ phase. The mean plasma half-lives($t_{1/2}$) of arsenic hexaoxide at the a and $\beta$ phase when administered at a dose of 5 mg/kg were 1.57 and 29.8 min, respectively. The maximum plasma concentration($C_{max}$) was 230 ng/mL, after oral administration of arsenic hexaoxide at a dose of 50 mg/kg. The bioavailability, which was calculated from the dose-adjusted ratio, of the oral administered arsenic hexaoxide was 1.61%. Of the various tissues tested, arsenic hexaoxide was mainly distributed in the spleen, lung, liver and kidney after oral administration. Arsenic hexaoxide levels in the spleen or lung at 24 hr after oral administration were higher than those of maximum plasma concentration($C_{max}$). The cumulative amounts of arsenic hexaoxide found in the urine by 48 hr after the administration of 50 mg/kg were 5-fold higher than those in the bile. However, the cumulative amounts in the feces were 10-fold higher compared with those of urine, suggesting that arsenic hexaoxide is mostly excreted in the feces. In conclusion, our observations indicated that arsenic hexaoxide was poorly absorbed from the gastro-intestinal tract to the blood circulation and transferred to tissues such as the spleen and lung at 24 hr after oral administration. Moreover, the majority of arsenic hexaoxide appears to be excreted in the feces by 48 hr after oral administration.