• Journal of the Korean Wood Science and Technology
• /
• v.34 no.3
• /
• pp.73-83
• /
• 2006

The dried needles (1.5 kg) of Abies koreana and Abies holophylla were ground, extracted with acetone-$H_2O$ (7:3, v/v), concentrated, and fractionated with a series of hexane, methylene chloride, ethyl acetate and water on a separatory funnel. Each fraction was freeze dried, then a portion of ethyl acetate soluble powder was chromatographed on a Sephadex LH-20 column using a series of aqueous methanol and ethanol-hexane mixture as eluents. The isolated compounds were identified by cellulose TLC, $^1H$, $^{13}C-NMR$, COSY, HETCOR, FAB and EI-MS. The needles of Abies koreana and Abies holophylla contained a large amount of aromadendrin-7-O-${\beta}$-D-glucopyranoside (compound III), polydatin (compound VI), (-)-rhododendrol-2-O-${\beta}$-D-glucopyranoside (compound VII), in addition to a small amount of (+)-catechin (compound I), kaempferol-3-O-${\beta}$-D-glucopyranoside (compound IV), myricetin-3-O-${\beta}$-D-glucopyranoside (compound V), naringenin-7-O-${\beta}$-D-glucopyranoside (compound II). DPPH analysis was also tested to investigate the antioxidative effects on the isolated compounds and (+)-catechin and polydatin were effective.

• Journal of Korean Society of Forest Science
• /
• v.95 no.4
• /
• pp.429-434
• /
• 2006

The dried needles (1.5 kg) of Picea abies Karsten were ground, extracted with acetone-$H_2O$ (7:3, v/v), concentrated, and fractionated with a series of n-hexane, methylene chloride, ethyl acetate and water on a separatory funnel. Each fraction was freeze dried, then a portion of ethyl acetate soluble powder was chromatographed on a Sephadex LH-20 column using a series of aqueous methanol and ethanol-n-hexane mixture as eluents. The isolated compounds were identified by cellulose TLC, $^1H$-, $^{13}C$-NMR, FAB and EI-MS. (+)-catechin (compound I), (-)-epicatechin (compound II), kaempferol-3-O-${\beta}$-D-glucopyranoside (compound III), 4-hydroxyacetophenone (compound IV) were isolated from the ethyl acetate soluble fraction and (+)-catechin (compound I), protocatechuic acid (compound V) were isolated from the $H_2O$ soluble fraction of P. abies needle. The antioxidative activities of each fraction and the isolated compounds were tested by DPPH radical scavenging method, and EtOAc soluble fraction, (+)-catechin and (-)-epicatechin showed similar values to ${\alpha}$-tocopherol and BHT as controls.

• Journal of Korean Society of Forest Science
• /
• v.96 no.6
• /
• pp.620-624
• /
• 2007

Allium victorials var. platyphyllum were ground, extracted with 95% EtOH, concentrated, and fractionated with a series of n-hexane, methylene chloride, ethyl acetate, butanol and water on a separatory funnel. A portion of ethyl acetate soluble fraction was chromatographed on a Sephadex LH-20 and silica gel column using various solvent system as eluents. The isolated compounds were identified by TLC, $^1H-$, $^{13}C$-NMR, HMBC and EI-MS. Astragalin (compound 1), kaempferol (compound 2), quercetin (compound 3), ferulic acid (compound 4) were isolated from the ethyl acetate soluble fraction of A. victorials.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.1
• /
• pp.56-62
• /
• 2002

The air-dried bark of Salix rorida was extracted with acetone-water(7:3, v/v) and its extractives were concentrated with a vacuum evaporator. The extractives were fractionated with a series of n-hexane, chloroform, ethylacetate(EtOAc) and water on a separatory funnel. Each fraction was freeze-dried to give some dark brown powder. The EtOAc and water soluble fractions were chromatographed on a Sephadex LH-20 column using a series of aqueous methanol and ethanol-hexane mixture as eluents. The isolated compounds were tested with a cellulose TLC developed with TBA and 6% acetic acid and then visualized on UV lamp or sprayed with vanillin-HCl-EtOH. The purified compounds were flavonoids and their glycosides as follows:(+)-catechin, naringenin, salipurposide, aromadendrin, isosalipurposide, aromadendrin-7-O-𝛽-D-glucopy- ranoside and taxifolin-7-O-𝛽-D-glucopyranoside. The structures of each compounds were confirmed by ¹H-NMR, ¹³C-NMR and mass spectra.

• Journal of Korean Society of Forest Science
• /
• v.99 no.6
• /
• pp.885-890
• /
• 2010

This study was conducted to confirm the application as ingredients of cosmetics through an examination of the function for anti-oxidant activity of the fraction isolated from Pyrus ussuriensis leaves. The dried leaf of Pyrus ussuriensis were extracted with acetone-$H_2O$ (6:4, v/v), concentrated and fractionated with the upper layer of acetone on a separatory funnel. Each fraction was freeze dried, then a portion of acetone soluble powder was chromatographed on a Sephadex LH-20 column using a series of aqueous methanol as eluents and also used the MIC-gel using a series of aqueous methanol as developing solvent. The isolated compounds were identified by silica-gel TLC. The concentration of total phenolic compound of Pyrus ussuriensis acetate soluble fraction was high, 914 mg/g. The results obtained from the analyses of the anti-oxidanat effects of Pyrus ussuriensis acetate fraction can be summarized as follows: In the result of DPPH scavenging radical activity, Pyrus ussuriensis acetate soluble fraction showed more than 80% at 100 ppm. SOD-like activity of one of Pyrus ussuriensis acetate soluble fractions was 77% at 1000 ppm. Xanthine oxidase inhibition of Pyrus ussuriensis acetate soluble fraction was 38% at 100 ppm. From these results, we confirmed that acetate fraction of Pyrus ussuriensis has a great potential as a natural ingredients with a natural antioxidant and antimicrobial source.

• Journal of Korean Society of Forest Science
• /
• v.100 no.2
• /
• pp.136-141
• /
• 2011

This study was conducted to confirm the application as ingredients of cosmetics through an examination of the function for anti-cancer and anti-microbial of the fraction isolated from Pyrus ussuriensis leaves. The dried leaf of P. ussuriensis were extracted with acetone-$H_{2}O$ (6:4, v/v), concentrated and fractionated with the upper layer of acetone on a separatory funnel. Each fraction was freeze dried, then a portion of acetone soluble powder was chromatographed on a Sephadex LH-20 column using a series of aqueous methanol as eluents and also used the MIC-gel using a series of aqueous methanol as developing solvent. The isolated compounds were identified by silica-gel TLC. The growth inhibition activity was measured using the MTT assay by the mouse meltioma (B16F10) cell. The cancer cell growth inhibition rate of fractions isolated from P. ussuriensis leaf was 80%. In anti-microbial activity test, the fraction of P. ussuriensis with 0.25 mg/disc resulted in the clear zone of 1.3 cm and 2 cm for Staphylococcus aureus and S. epidermidis of gram positive bacillus, respectively. In Escherichia coli of gram negative bacillus, the fraction with 0.5 mg/disc resulted in the clear zone of 1.1 cm~1.5 cm each fraction. From these results, we confirmed that acetate fraction of P. ussuriensis has a great potential as a natural ingredients with a anti-cancer and anti-microbial source.

• Advances in concrete construction
• /
• v.6 no.2
• /
• pp.103-121
• /
• 2018

This paper reports the effects of coarse and fine recycled concrete aggregates (RCA) on fresh and hardened properties of self-compacting concrete (SCC) containing ground granulated blast-furnace slag (GGBFS) as cement replacement. For this purpose, three SCC mixes groups, were produced at a constant water to binder ratio of 0.38. Both fine and coarse recycled aggregates were used as natural aggregates (NA) replacement at different substitution levels of 0%, 25%, 50%, 75% and 100% by volume for each mix group. Each group, included 0, 15% or 30% GGBFS as Portland cement replacement by weight. The SCC properties investigated were self-compactability parameters (i.e., slump flow, T500 time, V-funnel flow time, L-box passing ability and sieve stability), compressive strength, capillary water absorption and water penetration depth. The results show that the combined use of RCA with GGBFS had a significant effect on fresh and hardened SCC mixes. The addition of both fine and coarse recycled aggregates as a substitution up to 50% of natural aggregates enhance the workability of SCC mixes, whereas the addition from 50 to 100% decreases the workability, whatever the slag content used as cement replacement. An enhancement of workability of SCC mixes with recycled aggregates was noticed as increasing GGBFS from 0 to 30%. RCA content of 25% to 50% as NA replacement and cement replacement of 15% GGBFS seems to be the optimum level to produce satisfactory SCC without any bleeding or segregation. Furthermore, the addition of slag to recycled concrete aggregates of SCC mixes reduces strength losses at the long term (56 and 90 days). However, a decrease in the capillary water absorption and water permeability depth was noticed, when using RCA mixes with slag.

• Computers and Concrete
• /
• v.21 no.2
• /
• pp.199-207
• /
• 2018

With the development of concrete technology, producing concrete products that have the ability to flow under their own weights and do not need internal or external vibrations is an important achievement. In this study, assessments are made on using travertine, marble and limestone rock flours in self-compacting lightweight concrete (SCLC). In fact, the effects of these powders on plastic and hardened phases of SCLC are studied. To address this issue, concrete mixtures with water to cementitious materials ratios of 0.42 and 0.45 were used. These mixtures were made with 0 and 10% silica fume (SF) replacement levels by cement weight. To achieve lightweight concrete, lightweight expanded clay aggregate (Leca) with the bulk density of about $520kg/m^3 $was utilized. Also two kinds of water were consumed involving tap water and magnetic water (MW) for investigating the possible interaction of MW and rock flour type. In this study, 12 mixtures were studied, and their specific weights were in the range of $1660-1692kg/m^3$. To study the mixtures in plastic phase, tests such as slump flow, J-ring, V-funnel and U-box were performed. By using marble and travertine powders instead of limestone flour, the plastic viscosities and rheology were not changed considerably and they remained in the range of regulations. Moreover, SCLC showed better compressive strength with travertine, and then with marble rock flours compared to limestone powders. According to the results of the conducted study, MW showed better performance in both fresh and hardened phases in all the mixes, and there was no interaction between MW and rock flour type.

• Advances in concrete construction
• /
• v.6 no.4
• /
• pp.323-344
• /
• 2018

The study herein reports the impact of Steel Fiber (SF) and Ground Granulated Blast Furnaces slag (GGBFS) content on the fresh and hardened properties of fly ash (FA) based Self-Compacting Geopolymer Concrete (SCGC). Two series of self-compacting geopolymer concrete (SCGC) were formulated with a constant binder content of $450kg/m^3$ and at an alkaline-to-binder (a/b) ratio of 0.50. Fly ash (FA) was substituted with GGBFS with the replacement levels being 0%, 25%, 50%, 75%, and 100% by weight in each SCGC series. Steel fiber (SF) wasn't employed in the assembly of the initial concrete series whereas, within the second concrete series, an SF combination was achieved by a constant additional level of 1% by volume. Fresh properties of mixtures were through an experiment investigated in terms of slump flow diameter, T50 slump flow time, V-funnel flow time, and L-box height ratio. Moreover, the mechanical performance of the SCGCs was evaluated in terms of compressive strength, splitting tensile strength, and fracture toughness. Furthermore, a statistical analysis was applied in order to judge the importance of the experimental parameters, like GGBFS and SF contents. The experimental results indicated that the incorporation of SF had no vital impact on the fresh characteristics of the SCGC mixtures whereas GGBFS aggravated them. However, the incorporation of GGBFS was considerably improved the mechanical properties of SCGCs. Moreover, the incorporation of SF with the total different quantity of GGBFS replacement has considerably increased the mechanical properties of SCGCs, by close to (65%) for the splitting strength and (200%) for compressive strength.

• Advances in materials Research
• /
• v.7 no.1
• /
• pp.45-72
• /
• 2018

In the present study, a special attention has been paid to the effects regarding the use of different superplasticizers in different dosages. To do so, 36 mixes of normal and self-compacting concrete with two water/binder ratios of 0.35 and 0.45, four different types of superplasticizer including melamine-formaldehyde, naphthalene-formaldehyde, carboxylic-ether and poly-carboxylate, four different superplasticizer/cement ratios of 0.4%, 0.8%, 1.2% and 1.6% and two silica fume/cement ratios of 0% and 10% have been cast. Moreover, the initial and final setting time of the pastes have been tested. For self-compacting mixes, flow time, slump flow, V-funnel, J-ring and L-box tests have been carried out as well as testing the compressive strength and rupture modulus. For normal concrete mixes,slump test has been conducted to assess the workability of the mix and then for each mix, the compressive strength and rupture modulus have been determined. The results indicate that in addition to the important role of superplasticizer type and dosage on fresh state properties of concrete, these parameters as well as the use of silica fume could affect the hardened state properties of the mixes. For instance, the mixes whose superplasticizer were poly-carboxylic-ether based showed better compressive and tensile strength than other mixes. Besides, the air contents showed robust dependency to the type of the superplasticizer. However, the use of silica fume decreased the air contents of the mixes.