• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.3
• /
• pp.449-454
• /
• 2006

We present a pressure sensor based on the mechanically induced long-period fiber gratings (LPFG) for detecting the multi-location strain variation. The theoretical analysis is performed using a graphic method for a weakly guiding step-index fiber. The calculated results are in good agreement with the experimental results. In this study, from the fact that the optical parameters of a single-mode fiber slightly differ from manufacturing company to manufacturing company, the multipoint pressure-detection sensor systems composed two identical LPFGs are realized. When the pressure is applied two LPFG sensors at once, the resonance peaks are separated as much as about 40 nm. These types of sensor systems are well suited as a multipoint monitoring of strain or temperature in the ship or the smart structure.

• Journal of the Korean Society for Library and Information Science
• /
• v.49 no.1
• /
• pp.129-148
• /
• 2015

This study grasped the true nature of the inquiry domain by analysing the requests for collaborative reference service in the social science field using the co-word technique, and schematized the intellectual structure. First, this study extracted 748 uncontrolled keywords from inquiries for reference in the field of social science. Second, calculated similarity indices between the words on the basis of co-occurrence frequency, and performed not only clustering but also MDS mapping. Third, to grasp the difference in inquiries for reference by period, dividing the period into two parts, and performed comparative analysis. As a result, there formed 5 clusters and "Korea Education" showed an overwhelming size with 40.3% among those clusters. The result of the analysis through the period division showed there were many questions about "Education" during the first half, while a lot of inquiries with focus on "welfare and business information" during the second half.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.6
• /
• pp.506-513
• /
• 2002

Distributed control systems(DCS) using fieldbus such as CAN have been applied to process systems but it is very difficult to design the DCS while guaranteeing the given end-to-end constraints such as precedence constraints, time constraints, and periods and priorities of tasks and messages. This paper presents a scheduling method to guarantee the given end-to-end constraints. The presented scheduling method is the integrated one considering both tasks executed in each node and messages transmitted via the network and is designed to be applied to a general DCS that has multiple loops with several types of constraints, where each loop consists of sensor nodes with multiple sensors, actuator nodes with multiple actuators and controller nodes with multiple tasks. An assignment method of the optimal period of each loop and a heuristic assignment rule of each message's priority are proposed and the integrated scheduling method is developed based on them.

• Journal of Applied Reliability
• /
• v.11 no.1
• /
• pp.43-57
• /
• 2011

In the paper, we consider two-dimensional warranty policy with failure times and repair times. The failure times are considered within the warranty period and the repair times are considered within the repair time limit. Under the renewable warranty policy and non-renewable warranty policy, we consider the number of warranty services in the censored area by warranty period and repair time limit to conduct warranty cost analysis. We investigate the field data to check their dependency and implement our proposed approaches to conduct warranty cost analysis using the parametric methods. Numerical examples are discussed to demonstrate the applicability of the methodologies and results based on the proposed approach in the paper.

• Structural Engineering and Mechanics
• /
• v.28 no.4
• /
• pp.357-372
• /
• 2008

This study investigates effect of uncertainty in natural vibration period on the seismic demand. It is shown that since this uncertainty affects the acceleration and displacement responses differently, two ratios, one relating peak acceleration responses and the other relating the peak displacement responses, are not equal and both must be employed in evaluating and defining the critical seismic demand. The evaluation of the ratios is carried out using more than 200 strong ground motion records. The results suggest that the uncertainty in the natural vibration period impacts significantly the statistics of the ratios relating the peak responses. By using the statistics of the ratios, a procedure and sets of empirical equations are developed for estimating the probability consistent seismic demand for both linear and nonlinear systems.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.3
• /
• pp.252-261
• /
• 1992

The accuracy of the position fixing with telemetry techniques depends in general on the accuracy of the location of the receiving point(hydrophone). To increase the accuracy of the coordinates of four hydrophones suspended down at both sides of the vessel anchored, each hydrophone motion is compensated using a depth pinger mounted on the seabed of 30m depth. The pinger location is calculated with a hyperbolic method. Using this technique so called hydrophone coordinates calibration, the movement of the Remotely Operated Vehicle(ROV), which has the same type of pinger mentioned above could be tracked down more accurately. Under the maximum variation ranges of a hydrophone of 5.2m in athwartships, 3.2m in alongship, and about 0.2m/s of the moving velocity in both directions, the ROV track with calibration is more close to the reality than that without calibration Tow depth pingers of same frequency can be distinguished by the use of three factors; The pulse period, the phase and the pulse period variation allowed in acquisition of the pinger as far as its pulse period is varied in smooth.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.516-519
• /
• 2012

This study proposes a method of an equivalent bell model in order to tune the beat period of a Korean bell. In a Korean bell having a slight asymmetry, each circumferential mode splits into a mode pair which has a slight difference in frequency, and the interaction of the mode pair makes a beat in vibration and sound. An equivalent bell model which consists of an axi-symmetric bell and an equivalent point mass, has the same mode property as in a real bell. The equivalent bell model is constructed by the finite element analysis based upon the theory of a revolutionary shell Using the equivalent bell model, the beat period is predicted when the bell thickness is locally decreased to improve the beat property. The predicted result is verified by experiment on a test bell. The proposed method is useful to save the time required for tuning the beat period of a large bell.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.5
• /
• pp.1-8
• /
• 1999

This paper describes the method for detection of the misfired cylinder by analysis of the variation of pressure occurred in exhaust manifold on an MPI gasoline engine. Misfired cylinder(s) cause a loss of power, an increase of fuel consumption and exhaust emission and vibration is caused by unsteady torque. Therefore early detection and correction of misfired cylinder(s) play a very important role in the proper performance and the exhaust emission. The method is a comparison of integration pressure index during the period of a blowdown in the displacement period. Experimental results showed that the method, using the variation of pressure in the exhaust manifold is proven to be effective in the detection of single cylinder or multiple cylinders misfire on the gasoline engine regardless of the engine revolutions. In addition, this method, using the variation of pressure in the exhaust manifold is a very easy and accurate method compared with other methods.

• Journal of the Korean Home Economics Association
• /
• v.24 no.4
• /
• pp.139-146
• /
• 1986

The purpose of this study was to identify aesthetic concepts of‘Sarangbang’furniture during the Yi-dynasty period and aesthetic descriptions indicating each concept expressed by experts in traditional furniture. The furniture selected for the study includes desks, table bookcases, document and stationary boxes (mungab), letter holders (Kobi) and inkstone boxes (younsang) with lacquer and oil finish on. The respondents were 72 traditional furniture experts; researchers collectors, sellers and artists related to period furniture. The important points of aesthetic descriptors were collected 123 from related literature. From experts' answers, 47 representative descriptors were selected. Data were analyzed with the SPSS using frequency, Percentage mean, factor analysis, t-test and C2. The results were as follows; 1. The aesthetic concept of sarangbang furniture during the Yi-dynasty can be categorized into 9 aspects; appearance of beauty, stability the interior space, naturalness, nobleness/harmony of lines, detail/refinement, simplicity, diversity solidity and surface division. 2. The characteristics of the Korean traditional furniture can be described using 47 descriptors explaining 9 concepts mentioned above.

• Journal of Applied Reliability
• /
• v.8 no.1
• /
• pp.1-13
• /
• 2008

A methodology for collection and analysis of automotive field reliability data is presented. Automotive warranty system usually covers a pre-determined period of time and/or mileage accumulation. Therefore mileage information for the vehicles that have not experienced any failure or problems during the warranty period is not available. In this paper, a reliability analysis method using the estimated mileage distribution from an additional survey for vehicles that have not any record during the warranty period is proposed. Methods of reliability analysis using the warranty information collected under the EU and US warranty policies are also provided.