• 제목/요약/키워드: User relay

검색결과 206건 처리시간 0.024초

Probabilistic Constrained Approach for Distributed Robust Beamforming Design in Cognitive Two-way Relay Networks

  • Chen, Xueyan;Guo, Li;Dong, Chao;Lin, Jiaru;Li, Xingwang;Cavalcante, Charles Casimiro
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제12권1호
    • /
    • pp.21-40
    • /
    • 2018
  • In this paper, we propose the distributed robust beamforming design scheme in cognitive two-way amplify-and-forward (AF) relay networks with imperfect channel state information (CSI). Assuming the CSI errors follow a complex Gaussian distribution, the objective of this paper is to design the robust beamformer which minimizes the total transmit power of the collaborative relays. This design will guarantee the outage probability of signal-to-interference-plus-noise ratio (SINR) beyond a target level at each secondary user (SU), and satisfies the outage probability of interference generated on the primary user (PU) above the predetermined maximum tolerable interference power. Due to the multiple CSI uncertainties in the two-way transmission, the probabilistic constrained optimization problem is intractable and difficult to obtain a closed-form solution. To deal with this, we reformulate the problem to the standard form through a series of matrix transformations. We then accomplish the problem by using the probabilistic approach based on two sorts of Bernstein-type inequalities and the worst-case approach based on S-Procedure. The simulation results indicate that the robust beamforming designs based on the probabilistic method and the worst-case method are both robust to the CSI errors. Meanwhile, the probabilistic method can provide higher feasibility rate and consumes less power.

NFC에 기반한 모바일 쿠폰 프로토콜에 대한 안전성 분석 및 대응 방안 (Security Analysis on NFC-based M-coupon Protocols and its Countermeasure)

  • 하재철
    • 한국산학기술학회논문지
    • /
    • 제16권2호
    • /
    • pp.1388-1397
    • /
    • 2015
  • 최근 NFC 기반의 모바일 디바이스를 이용하여 모바일 쿠폰 시스템을 구현하는 응용 비즈니스 모델이 제안되었다. 본 논문에서는 안전한 모바일 쿠폰 시스템을 위한 보안 요구 사항을 살펴보고 기존에 제시된 프로토콜에 대해 보안성 침해요소를 분석하였다. 그리고 구현의 효율성과 안전성을 고려하여 D-H(Diffie-Hellman) 키 일치 기법에 기반한 새로운 모바일 쿠폰 프로토콜을 제안하였다. 제안한 프로토콜은 공개 키 기반 구조나 비밀 키 분배 문제를 해결하면서 사용자 인증 기능을 제공하며 중계 공격에도 대응할 수 있도록 설계되었다.

광대역 무선 엑세스 망에서 WiFi 액세스 사용자 인증 (WiFi Access User Authentication in Broadband Wireless Access Network)

  • 이용;이구연
    • 산업기술연구
    • /
    • 제28권B호
    • /
    • pp.33-37
    • /
    • 2008
  • Recently, there have been intensive researches on the wireless Internet access through WiFi WLAN using WiRro network as backhaul link in the Internet service providing business area. However, in the wireless Internet access method, we need to solve the compatibility problem for different user authentications between licensed WiBro network and unlicensed WiFi network for billing and user management. In this paper, we propose an authentication method for WiFi users by BWAN operators through WiNNERs which is RS connecting the two networks, and discuss the effectiveness of the method.

  • PDF

A Minimum Energy Consuming Mobile Device Relay Scheme for Reliable QoS Support

  • Chung, Jong-Moon;Kim, Chang Hyun;Lee, Daeyoung
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제8권2호
    • /
    • pp.618-633
    • /
    • 2014
  • Relay technology is becoming more important for mobile communications and wireless internet of things (IoT) networking because of the extended access network coverage range and reliable quality of service (QoS) it can provide at low power consumption levels. Existing mobile multihop relay (MMR) technology uses fixed-point stationary relay stations (RSs) and a divided time-frame (or frequency-band) to support the relay operation. This approach has limitations when a local fixed-point stationary RS does not exist. In addition, since the time-frame (or frequency-band) channel resources are pre-divided for the relay operation, there is no way to achieve high channel utilization using intelligent opportunistic techniques. In this paper, a different approach is considered, where the use of mobile/IoT devices as RSs is considered. In applications that use mobile/IoT devices as relay systems, due to the very limited battery energy of a mobile/IoT device and unequal channel conditions to and from the RS, both minimum energy consumption and QoS support must be considered simultaneously in the selection and configuration of RSs. Therefore, in this paper, a mobile RS is selected and configured with the objective of minimizing power consumption while satisfying end-to-end data rate and bit error rate (BER) requirements. For the RS, both downlink (DL) to the destination system (DS) (i.e., IoT device or user equipment (UE)) and uplink (UL) to the base station (BS) need to be adaptively configured (using adaptive modulation and power control) to minimize power consumption while satisfying the end-to-end QoS constraints. This paper proposes a minimum transmission power consuming RS selection and configuration (MPRSC) scheme, where the RS uses cognitive radio (CR) sub-channels when communicating with the DS, and therefore the scheme is named MPRSC-CR. The proposed MPRSC-CR scheme is activated when a DS moves out of the BS's QoS supportive coverage range. In this case, data transmissions between the RS and BS use the assigned primary channel that the DS had been using, and data transmissions between the RS and DS use CR sub-channels. The simulation results demonstrate that the proposed MPRSC-CR scheme extends the coverage range of the BS and minimizes the power consumption of the RS through optimal selection and configuration of a RS.

협력 무선인지 네트워크에서의 보안 채널 용량 분석 (On the Secrecy Capacity in Cooperative Cognitive Radio Networks)

  • 누엔반딘;김현민;신오순
    • 한국통신학회논문지
    • /
    • 제39B권11호
    • /
    • pp.803-809
    • /
    • 2014
  • 본 논문에서는 면허 사용자와 감청 사용자가 존재하는 인지무선 네트워크에서 릴레이 선택 기능을 이용한 물리 계층 보안 시스템을 제안하고 성능을 분석한다. 먼저 감청에 대한 보안성 확보를 위해 수신기 측에서의 채널 정보를 이용하는 기회적 최적 릴레이 선택 방법과 다중 안테나 다이버지시티를 이용하는 시스템을 제안한다. 이러한 시스템에서 인지무선 네트워크의 보안 outage 확률을 정의하고 수학적으로 정확한 확률 식을 유도한다. 아울러 송신전력에 제한이 없는 경우에 대한 점근적 outage 확률을 구한다. 수치 해석 결과를 제시함으로써 유도한 확률식의 정확성을 검증한다.

Relay-assisted multiuser MIMO-DQSM system for correlated fading channels

  • Francisco R. Castillo-Soria;Carlos Gutierrez;Fermin M. Maciel-Barboza;Viktor I. Rodriguez Abdala;Jayanta Datta
    • ETRI Journal
    • /
    • 제46권2호
    • /
    • pp.184-193
    • /
    • 2024
  • This paper presents the performance evaluation of an amplify-and-forward (AF) relay-assisted multiuser multiple input-multiple output (MU-MIMO) downlink transmission system for correlated fading channels. The overall system performance was improved by incorporating a double-quadrature spatial modulation (DQSM) scheme. The bit error rate (BER) performance and detection complexity of the AF-MU-MIMO-DQSM system were analyzed and compared with those of a conventional AF-MU-MIMO system under the same conditions and parameters. The results showed that the correlated fading channel severely affected the performance of systems with higher spectral efficiency (SE). Considering an SE of 12 bpcu/user, the AF-MU-MIMO-DQSM system yielded a gain of up to 3 dB in BER performance compared with that of its conventional counterpart for the analyzed cases. In terms of detection complexity, the AF-MU-MIMO-DQSM system showed a reduction of up to 56 % compared with that of the conventional system for the optimal maximum likelihood detection criterion.

FDDI와 프레임 릴레이를 이용한 고속 데이터 통신망 설계 및 구축 (Design and Construction of High Speed Data Communication Network Using FDDI and Frame Realy)

  • 김도현
    • 한국국방경영분석학회지
    • /
    • 제23권2호
    • /
    • pp.171-191
    • /
    • 1997
  • In this paper, we design and construct a high speed LAN(Local Area Network) using FDDI(Fiber Distributed Data Interface) and Frame Relay in order to support our multimedia communication services. A program of this communication network is divided into requirement analysis, design, establishment and test. First, we propose an optimal communication method that compares various network techniques in the requirement analysis phase. Second, we design the physical network configuration, secure method, and address in the LAN and WAN. Finally, we establish and test the communication devices and lines. Ultimately, we minimized mistakes and satisfied user requirements using this program. We constructed efficiently a high speed data communication network using FDDI and Frame Relay.

  • PDF

MATLAB을 이용한 GUI 소프트웨어 개발에 관한 연구 (A Study on the Development of GUI Software using MATLAB)

  • 김병천;김철환
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 하계학술대회 논문집 A
    • /
    • pp.449-451
    • /
    • 2000
  • Arcing fault on overhead lines can be detected by amplitude of the arc voltage using numerical algorithm. In the case of transient fault, the arc voltage has any high value. In the case of permanent fault, the arc voltage is near zero. Thus, fault distance estimation should be performed by digital distance relay algorithm[3]. The purpose of this study is to build a structure for modeling of arcing fault detection and fault distance estimation algorithm using Matlab programming. Additionally, this algorithm has been designed in Graphical User Interface(GHI). So, this method using GUI interface of Matlab can reduce the number of simulation steps in modeling the distance relay.

  • PDF

CLSR: Cognitive Link State Routing for CR-based Tactical Ad Hoc Networks

  • Ahn, Hyochun;Kim, Jaebeom;Ko, Young-Bae
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제9권1호
    • /
    • pp.50-67
    • /
    • 2015
  • The Cognitive Radio (CR) paradigm in tactical ad hoc networks is an important element of future military communications for network-centric warfare. This paper presents a novel Cognitive Link State Routing protocol for CR-based tactical ad hoc networks. The proposed scheme provides prompt and reliable routes for Primary User (PU) activity through procedures that incorporate two main functions: PU-aware power adaptation and channel switching. For the PU-aware power adaptation, closer multipoint relay nodes are selected to prevent network partition and ensure successful PU communication. The PU-aware channel switching is proactively conducted using control messages to switch to a new available channel based on a common channel list. Our simulation study based on the ns-3 simulator demonstrates that the proposed routing scheme delivers significantly improved performance in terms of average end-to-end delay, jitter, and packet delivery ratio.

DSP를 이용한 디지털 보호 계전기의 시뮬레이터에 관한 연구 (A Study on Development of Digital Protective Relay Simulator using Digital Signal Processor)

  • 이종주;정호성;박철원;신명철;안태풍;고인석
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 A
    • /
    • pp.237-239
    • /
    • 2001
  • This paper describes the digital relay simulator system using digital signal processor. The simulator system has two parts, one is software and the other is hardware part. The simulation software has variety calculation engines ; EMTP simulation data file conversion, user define simulation data generation, sequence data generation, data analysis engines. etc, these are designed upon GUI. And simulator software provides easy control interface for users, the simulator software performs on every MS Windows OS. The simulator hardware design uses 32bit floating point DSP(TMS320C32) architecture to achieve flexibility and high speed operation.

  • PDF