• 한국조경학회지
• /
• 제51권1호
• /
• pp.42-55
• /
• 2023

지구온난화로 인한 세계적 기후 위기를 맞아 탄소성능 정량화에 기반한 정책들이 빠르게 도입되면서, 신규 조성되는 도시녹지 계획안의 탄소성능을 예측할 수 있는 방법론이 요구되고 있다. 이에 본 연구에서는 조경분야에서 탄소저감설계를 위해 활용할 수 있는 수목 탄소계산기를 개발하고, 조경설계 실무에서의 효용성을 검증하고자 하였다. 설계 현장에서의 운용성 확보를 위해 범용성 높은 MS Excel을 포맷으로 선정하고, 식재설계의 업무적 특성을 반영할 수 있도록 대표 수종 93종을 대상으로 수종별, 규격별 탄소흡수량과 저장량을 추출하였다. 특히 실무에서 비용적 한계를 반영할 수 있도록 수목 단가를 포함한 데이터베이스를 구축하였다. 수목 탄소계산기의 성능 검증을 위한 식재 실험설계는 조경설계 전문가 4인을 대상으로 중부지방 소공원에 대한 설계 시뮬레이션을 시행하였고, 전후로 반구조적 인터뷰를 진행하여 그 인과관계를 분석하였다. 그 결과 수목 탄소계산기를 사용한 설계안의 탄소흡수량과 탄소저장량이 각각 약 17-82%, 약 14-85% 높게 나타났다. 탄소성능 효율이 높아진 이유는 탄소성능 우수종으로의 교체와 더불어, 예산 범위 내에서 적극적인 추가 식재로 인한 것임을 확인하였다. 설계가들은 사전 인터뷰에서 수목 탄소계산기에 대한 불신과 새로운 프로그램에 대한 부담감을 가졌으나, 사용 후 유용성 및 편의성에 대해 긍정적으로 평가하며 인식의 변화를 보여주었다. 추후 조경분야 탄소저감설계의 본격적인 도입을 위해서는 수목뿐 아니라 조경성능 전반에 대한 탄소계산기로 발전할 필요가 있다. 본 연구는 조경설계 분야에서 본격적으로 정량적 데이터에 입각한 탄소저감설계를 도입하는 데 있어 유용한 방향성을 제시해 줄 것으로 기대된다.

• 한국환경농학회지
• /
• 제41권4호
• /
• pp.355-364
• /
• 2022

BACKGROUND: Pre-harvest interval and decline pattern of thiamethoxam were determined in kiwifruit using liquid chromatography-tandem mass spectrometry (LCMS/MS). The study was carried out to propose import tolerance using OECD maximum residue limit (MRL) calculator for the export promotion of kiwifruit to Taiwan. METHODS AND RESULTS: The thiamethoxam residue in kiwifruit was determined by using the LC-TriQ-MS/MS with the analytical process to set up the import tolerance under greenhouse conditions for Taiwan. Excellent linearity was observed for all of the analytes with a determination coefficient (R²)≥0.99. The limit of quantification was determined to be 0.01 mg/kg for both thiamethoxam and clothianidin in kiwifruit. Linearity was determined from the co-efficient of determinants (R²) obtained from the seven-point calibration curve. The standard calibration curve showed as follows; 1) Site 1 (Gimje): y = 944,406X + 1,583 (R²=0.9995), 2) Site 2 (Goheung): y = 1,356,205X + 934 (R²=0.9983), and 3) Site 3 (Jangheung): y = 1,239,937X - 3,090 (R²=0.9908). The residue of thiamethoxam in the kiwifruit for three decline trials showed the range of 0.35 to 0.56 mg/kg in site 1 (Gimje), 0.24 to 0.55 mg/kg in site 2 (Goheung), and 0.28 to 0.42 mg/kg in site 3 (Jangheung), respectively. However, clothianidin was not detected in all of the treatments. The maximum residual amounts (decline) in the samples, sprayed according to the safe-use standard for thiamethoxam 10% WG in kiwifruit (30 days before harvest, 3 sprays every 7 days) were 0.56 mg/kg in site 1, 0.55 mg/kg in site 2, and 0.42 mg/kg in site 3, respectively. CONCLUSION(S): The import tolerance (IT) of thiamethoxam for kiwifruit may be proposed to be 0.9 mg/kg by using the OECD MRL calculator.

• Journal of Microbiology and Biotechnology
• /
• 제28권12호
• /
• pp.2046-2056
• /
• 2018

Phospholipase D has great commercial value due to its transphosphatidylation products that can be used in the food and medicine industries. In order to construct a strain for use in the production of PLD, we employed a series of combinatorial strategies to increase PLD expression in Bacillus subtilis WB600. These strategies included screening of signal peptides, selection of different plasmids, and optimization of the sequences of the ribosome-binding site (RBS) and the spacer region. We found that using the signal peptide amyE results in the highest extracellular PLD activity (11.3 U/ml) and in a PLD expression level 5.27-fold higher than when the endogenous signal peptide is used. Furthermore, the strain harboring the recombinant expression plasmid pMA0911-PLD-amyE-his produced PLD with activity enhanced by 69.03% (19.1 U/ml). We then used the online tool \RBS Calculator v2.0 to optimize the sequences of the RBS and the spacer. Using the optimized sequences resulted in an increase in the enzyme activity by about 26.7% (24.2 U/ml). In addition, we found through a transfer experiment that the retention rate of the recombinant plasmid after 5 generations was still 100%. The final product, phosphatidylserine (PS), was successfully detected, with transphosphatidylation selectivity at 74.6%. This is similar to the values for the original producer.

• 시스템엔지니어링학술지
• /
• 제14권2호
• /
• pp.24-32
• /
• 2018

System Complexity one of the most common cause failure of the projects, it leads to a lack of understanding about the functions of the system. Hence, the model is developed for communication and furthermore modeling help analysis, design, and understanding of the system. On the other hand, the text-based specification is useful and easy to develop but is difficult to visualize the physical composition, structure, and behaviour or data exchange of the system. Therefore, it is necessary to transform system description into a diagram which clearly depicts the behaviour of the system as well as the interaction between components. According to the International Atomic Energy Agency (IAEA) Safety Glossary, The safety system is a system important to safety, provided to ensure the safe shutdown of the reactor or the residual heat removal from the reactor core, or to limit the consequences of anticipated operational occurrences and design basis accidents. Core Protection Calculator System (CPCS) in Advanced Power Reactor 1400 (APR 1400) Nuclear Power Plant is a safety critical system. CPCS was developed using systems engineering method focusing on Departure from Nuclear Boiling Ratio (DNBR) calculation. Due to the complexity of the system, many diagrams are needed to minimize the risk of ambiguities and lack of understanding. Using Model-Based Systems Engineering (MBSE) software for modeling the DNBR algorithm were used. These diagrams then serve as the baseline of the reverse engineering process and speeding up the development process. In addition, the use of MBSE ensures that any additional information obtained from auxiliary sources can then be input into the system model, ensuring data consistency.

• 한국재난정보학회 논문집
• /
• 제18권1호
• /
• pp.116-128
• /
• 2022

연구목적: 첫째, 국내에서 재생복사용지가 많이 사용되지 않고 시장이 활성화되지 못한 이유를 파악하고, 둘째, 복사용지가 재생복사용지로 대체되었을 경우의 환경적 효과를 알아본다. 셋째, 재생복사용지의 시장을 활성화시킬 수 있는 개선방안을 도출한다. 연구방법: 재생복사용지에 대한 인식을 조사하기 위해 설문조사를 실시하였고 그 결과를 SPSS를 이용하여 분석하였다. 또한 Life Cycle Assessment 기법과 Paper Calculator V4.0을 사용하여 재생복사용지로의 전환에 따른 환경적 효과를 측정한다. 연구결과: 설문조사 응답자들은 재생복사용지의 낮은 사용경험에도 불구하고 재생복사용지에 대한 필요성을 인정하고 있으며 품질에 대한 만족도도 높은 편이었다. 또한 고지율40% 재생복사용지의 시장점유율이 10%로 상승 시 6만 톤의 CO₂ 감소의 환경적 효과를 확인하였다. 결론: 인식조사 및 시장조사 결과에 대한 분석을 통하여 재생복사용지 시장 활성화를 위한 5가지 개선방안을 제시하였다.

• Journal of Radiation Protection and Research
• /
• 제46권1호
• /
• pp.1-7
• /
• 2021

Background: The use of computed tomography (CT) device has increased in the past few decades in Japan. Dose optimization is strongly required in pediatric CT examinations, since there is concern that an unreasonably excessive medical radiation exposure might increase the risk of brain cancer and leukemia. To accelerate the process of dose optimization, continual assessment of the dose levels in actual hospitals and medical facilities is necessary. This study presents organ dose estimation using pediatric cerebral CT scans in the Kyushu region, Japan in 2012 and the web-based calculator, WAZA-ARI (https://waza-ari.nirs.qst.go.jp). Materials and Methods: We collected actual patient information and CT scan parameters from hospitals and medical facilities with more than 200 beds that perform pediatric CT in the Kyushu region, Japan through a questionnaire survey. To estimate the actual organ dose (brain dose, bone marrow dose, thyroid dose, lens dose), we divided the pediatric population into five age groups (0, 1, 5, 10, 15) based on body size, and inputted CT scan parameters into WAZA-ARI. Results and Discussion: Organ doses for each age group were obtained using WAZA-ARI. The brain dose, thyroid dose, and lens dose were the highest in the Age 0 group among the age groups, and the bone marrow and thyroid doses tended to decrease with increasing age groups. All organ doses showed differences among facilities, and this tendency was remarkable in the young group, especially in the Age 0 group. This study confirmed a difference of more than 10-fold in organ doses depending on the facility and CT scan parameters, even when the same CT device was used in the same age group. Conclusion: This study indicated that organ doses varied widely by age group, and also suggested that CT scan parameters are not optimized for children in some hospitals and medical facilities.

• 대한토목학회논문집
• /
• 제28권1B호
• /
• pp.111-114
• /
• 2008

파랑의 분산관계식에서 상대수심이 반복적으로 표현되는 순환 관계를 이용하여 파랑분산식의 양해를 개발하였다. 순환 관계를 이용한 해의 초기값으로 Eckart(1951), Hunt(1979)의 해와 심해와 천해에서의 해를 사용했다. 순환해 가운데 심해에서의 해를 초기값으로 사용한 해를 제외하고는 모두 참값으로 수렴하였다. 특히, Hunt의 해를 초기값으로 사용한 해는 다른 해보다 더 빠르게 수렴했다. 순환해는 휴대용 계산기를 사용하여 손 쉽고 빠르게 구할 수 있는 장점이 있다. 선형파의 변형을 예측하기 위하여 해석 해를 사용할 경우 파랑분산식의 양해를 사용해야 하는 데 본 연구에서 개발한 순환해를 사용하면 기존의 양해를 사용한 것보다 더 정확한 해석 해를 도출할 것이다.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제6권1호
• /
• pp.53-63
• /
• 2002

This study investigates the impact of Calculator-Based Ranger (CBR) activities in the performance of middle school students' graphing abilities of physical phenomena. Two issues about CBR activities on graphing abilities were addressed in this study; (1) the effect of CBR activities on graphing abilities, and (2) the influence of instructional styles on students' graphing abilities. Following the use of CBR activities, students' graphing abilities were significantly more developed in three components-interpreting, modeling, and transforming. Significant differences were found in students' achievement depending on instructional styles related to differentiation, which is closely connected to transforming distance-time graphs to velocity-time graphs. The findings of this study indicate that CBR activities may enhance students in constructing appropriate webs of related concepts and ability to qualitatively interpret graphs. Using collaborative CBR activities to introduce and explore graphing of physical phenomena is, therefore, recommended for inclusion in the secondary mathematics curriculum.

• Structural Engineering and Mechanics
• /
• 제51권5호
• /
• pp.823-845
• /
• 2014

Success in the excavation of foundations is commonly known as being very important in asserting stability. Furthermore, when the subjected formation is rocky and the use of explores is required, the demands of successful blasting are multiplied. The quick and correct estimation of excavation's characteristics may help the design of building structures, increasing their safety. The present paper proposes a new classification system which connects blastability and rock mass quality. This new system primarily concerns poor and friable rock mass, heavily broken with mixture of angular and rounded rock pieces. However, it should concern medium and good quality rock mass. The Blastability Quality System (BQS) can be an easy and widely - used tool as it is a quick calculator for blastability index (BI) and rock mass quality. Taking into account the research calculations and the parameters of BQS, what has been at question in this paper is the effect of BI magnitude on a geological structure.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제53권2호
• /
• pp.163-184
• /
• 2014

The purpose of this study was to develop the assessment tools using graphing calculators for the assessment of the mathematical process which was emphasized in 2009 reformed mathematics curriculum. In this paper, we presented three sample calculator-based test items for the assessment of students' mathematical process abilities and scoring rubrics for the paper and pencil assessment and assessment based on observation on each item. In order to improve mathematics teachers' understanding of the assessment tools using graphing calculators and to show the procedures of assessment using technological devices, we also drew up assessment guidelines. We hope the results of the study contribute to the promotion of assessment environment encouraging the use of graphing calculators in assessments.