• Korean Journal of Ecology and Environment
• /
• v.56 no.3
• /
• pp.187-195
• /
• 2023

Almost all of the water from agricultural dams located to the upper of the Yeongsan river is supplied as irrigation water for farmland and thus is not discharged to the main stream of the river. Also, most of the irrigation water does not return to the river after use, adding to the lack of flow in the main stream. As a result, the water quality and aquatic health of the river have become the poorest among the four major rivers in Korea. Therefore, in this study, several strategies for water quality improvement of the river were developed considering pollution reduction and flow rate increase, and their effect analysis was performed using a water quality model. The results of this study showed that the target water quality of the Yeongsan river could be achieved if flow increase strategies (FISs) are intensively pursued in parallel with pollution reduction. The reason is because the water quality of the river has been steadily improved through pollution reduction but this method is now nearing the limit. In addition, rainfall-related FISs such as dam construction and water distribution adjustment may be less effective or lost if a megadrought continues due to climate change and then rainfall does not occur for a long time. Therefore, in the future, if the application conditions for the FISs are similar, the seawater desalination facility, which is independent of rainfall, should be considered as the priority installation target among the FISs. The reason is that seawater desalination facilities can replace the water supply function of dams, which are difficult to newly build in Korea, and can be useful as a climate change adaptation facility by preventing water-related disasters in the event of a long-term megadrought.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.2
• /
• pp.117-131
• /
• 2006

A coupled T-H-M(Thermo-Hydro-Mechanical) analysis was carried out for KENTEX (KAERI Engineering-scale T-H-M Experiment for Engineered Barrier System), which is a facility for validating the coupled T-H-M behavior in the engineered barrier system of the Korean reference HLW(high-level waste) disposal system. The changes of temperature, water saturation, and stress were estimated based on the coupled T-H-M analysis, and the influence of the types of mechanical constitutive material laws was investigated by using elastic model, poroelastic model, and poroelastic-plastic model. The analysis was done using ABAQUS, which is a commercial finite element code for general purposes. From the analysis, it was observed that the temperature in the bentonite increased sharply for a couple of days after heating the heater and then slowly increased to a constant value. The temperatures at all locations were nearly at a steady state after about 37.5 days. In the steady state, the temperature was maintained at $90^{\circ}C$ at the interface between the heater and the bentonite and at about $70^{\circ}C$ at the interface between the bentonite and the confining cylinder. The variation of the water saturation with time in bentonite was almost same independent of the material laws used in the coupled T-H-M processes. By comparing the saturation change of T-H-M and that of H-M(Hydro-Mechanical) processes using elastic and poroelastic material mod31 respectively, it was found that the degree of saturation near the heater from T-H-M calculation was higher than that from the coupled H-M calculation mainly because of the thermal flux, which seemed to speed up the saturation. The stresses in three cases with different material laws were increased with time. By comparing the stress change in H-M calculation using poroelasetic and poroelasetic-plastic model, it was possible to conclude that the influence of saturation on the stress change is higher than the influence of temperature. It is, therefore, recommended to use a material law, which can model the elastic-plastic behavior of buffer, since the coupled T-H-M processes in buffer is affected by the variation of void ratio, thermal expansion, as well as swelling pressure.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.2
• /
• pp.253-260
• /
• 2014

Purpose: The present study was conducted to investigate whether near work with smartphone could induce the change of accommodative function. Methods: Total 63 subjects(26 male and 37 female) in their 20s were firstly examined their visual functions related to accommodation and uncorrected spherical equivalent power as the control. After that, the subjects were asked to read a book for 30 min and sequentially watch a movie on smartphone for the same time after 30 min-break under the indoor light or as it was in the reverse order to avoid time-ordered effect. Their accommodative functions, 1) accommodative amplitude, 2) accommodative facility, 3) relative positive/negative accommodation, and 4) accommodative lag and their uncorrected spherical equivalent power were examined again following each task and compared with the control values. Results: The monocular accommodative amplitude was significantly decreased after smartphone watching compared with it after reading. The monocular and binocular accommodative facilities were tended to reduce after smartphone watching and book reading but were not significantly different. Neither significant change in positive relative accommodation was determined after smartphone watching nor book reading. Negative relative accommodation after smartphone watching was almost unchanged unlike reading a book. The accommodative lag after smartphone work was significantly higher than after book reading. Conclusions: The near work with a smartphone for 30 min induced the change of some accommodative functions, which was significantly greater than when reading under the same working environment.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.1
• /
• pp.19-27
• /
• 2012

The open-top chamber (OTC) system is designed for long term studies on the climate change impact on the major tree species and their community in Korea. In Korea Forest Research Institute (KFRI), the modified OTC system has been operating since September 2009. The OTC facility consists of six decagon chambers (10 meters in diameter by 7 meters high) with controlled gas concentration. In each chamber, a series of vertical vent pipes are installed to disperse carbon dioxide or normal air into the center of the chamber. The OTC is equipped with remote controlled computer system in order to maintain a stable and elevated concentration of carbon dioxide in the chamber throughout the experimental period. The experiment consisted of 4 treatments: two elevated $CO_2$ levels ($1.4{\times}$ and $1.8{\times}$ ambient $CO_2$) and two controls (inside and outdoors of the OTC). Average operational rate was the lowest (94.2%) in June 2010 but increased to 98% in July 2010 and was 100% during January to December 2011. In 2010~2011, $CO_2$ concentrations inside the OTCs reached the target programmed values, and have been maintained stable in 2011. In 2011, $CO_2$ concentrations of 106%, 100% and 94% of target values has been recorded in control OTC, $1.4{\times}$ $CO_2$-enriched OTC and $1.8{\times}$ $CO_2$-enriched OTC, respectively. With all OTC chambers, the difference between outside and inside temperatures was the highest ($1.2{\sim}2.0^{\circ}C$) at 10 am to 2 pm. Temperature difference between six OTC chambers was not detected. The relative humidity inside and outside the chambers was the same, with minor variations (0~1%). The system required the highest amount of $CO_2$ for operation in June, and consumed 11.33 and 17.04 ton in June 2010 and 2011, respectively.

• Journal of Technologic Dentistry
• /
• v.28 no.1
• /
• pp.177-198
• /
• 2006

This study purposed to offer basic data for safety education of the dental laboratory technology after the investigation of how much the students in the dept. of dental laboratory technology are aware of the danger of each instrument, equipment or laboratory procedure that they use during laboratory and how much they demand safety education for this. The objects for this study were 423 students who were in the dept. of dental laboratory technology. In this regard, four colleges which have the dept. of dental laboratory technology were randomly selected to do a questionnaire survey. SPSS 12.0 was used to analyze the collected data. The results were as follows: As for satisfaction with their major, the respondents answered Satisfied (59.1%), Average (35.5%) and Dissatisfied (5.4%). In terms of the production process of a partial denture, they considered casting, polishing the casting body, polishing denture and burn out were most dangerous in order. As for the production process of a full denture, what they regarded as the most dangerous in order was polishing denture, deflasking and wax wash. Regarding the laboratory procedures of porcelain material, casting, trimming casting body, polishing porcelain material and burn out were the most dangerous procedures that they perceived. With regard to materials for use, alcohol, polishing, metal and wire were the most dangerous ones they thought. As for the handling characteristics of each material, small towns showed a higher demand for safety of the handling characteristics of alcohol. In terms of school year and sex, juniors and girls had higher scores in the demand for safety of the handling characteristics of acid. Regarding the handling characteristics of each equipment and instrument, all of small towns, juniors and girls showed the highest demand for safety of the handling characteristics of alcohol lamps. With regard to scores in the demand for safety of other characteristics, all of small towns, juniors and girls had the highest demand for safety of emergency treatment. Concerning the demand for safety education by the completion of safety education, in terms of each material, highest was the demand for safety of acid from the group which completed safety education. In regard to equipments and instruments, when it came to the demand for safety of the handling characteristics of casting machine, the educated group's demand for safety of acid was higher. Regarding other characteristics, the group which was not educated gained higher scores in the demand for safety of emergency treatment. 11. In all areas(materials, machines and others), small towns, girls and juniors showed higher scores in the demand for safety. Based on the above results, it was found that when students conduct the laboratory of dental technology, they would think that many materials, instruments or equipments for use are very dangerous. However, safety education was not fully given to them. Regarding the scores in the damned for safety education, the highest was 4.16 and the lowest was 3.43, which suggests that the scores were generally very high. In this regard, it is necessary to continue delivering a systematic safety education of materials, equipments or instruments used during the laboratory of dental technology. Therefore, through the analysis of each material, instruments or facility used in every laboratory and each process, safety accident types and accident risk factors should be investigated to develop educational materials for this. Moreover, it is required to open safety education as a single course of study or insert safety contents of all materials and machines into the class of dental laboratory instrument or dental materials for the purpose of a systematic and thorough safety education to prevent a safety accident during laboratory.

• Journal of Distribution Science
• /
• v.9 no.4
• /
• pp.43-50
• /
• 2011

Concerning the risk factors of the outbreak of a fire in a traditional market, most of those markets are located in downtown areas or residential areas; thus, although their location may be favorable in terms of marketability, they face a potential risk in that a fire may develop into a large blaze owing to poor environment or the absence of facilities prepared for disaster during a fire. Moreover, as many people are densely poised in the markets, it is very probable that a fire may occur owing to the excessive use of heaters in the winter as well as the reckless use of electric and gas facilities. It seems that traditional markets encounter difficulty being insured against fire, because of their vulnerability and that the vast majority of small-scale sellers are likely to suffer mental anguish and tremendous physical injury in case of a fire. However, most of those sellers in the traditional markets are hand-to-mouth sellers, and they lack awareness of safety concerns and have insufficient experience in safe facility management. As small-scale sellers constitute the majority in the traditional market, the subscription rate of fire insurance in most of the traditional markets is low for the reasons of their needy circumstances and their financial burden. Statistically, the subscription by street vendors is non-existent; therefore, these vendors have a fairly limited access to indemnification after fire damage. Because of these problems, this study's purpose is to identify the current level of insurance subscription by these markets, which are exposed to poor facilities and vulnerability to fire. In order to fix this, it appears that shop owners and consumers will have to band together. For this study, we executed a fire policyholder fact-finding mission at traditional markets with approximately 108 and 981 stores. The research method was executed by an investigation using one-on-one individual interviews using a questionnaire. The contents investigated current insurance subscriptions. The method of analysis looked at the difference of insured amount according to volume size through cross-tabulation of the difference of insured amount by possession form, difference of insured amount by market form, difference of insured amount by category of business, difference of insured amount by market size, etc. Furthermore, the study should be used to propose solutions for problems through theoretical review with the use of a literature research, because the field case study was through interviews with the persons concerned, and the survey of the current insurance subscriptions by traditional market shopkeepers. The traditional market would generally have difficulty affording fire insurance. Fire insurance subscription rates of most of the market proved to be inactive, because of the economic burden of payment. Lack of funds is thought to be the main factor that causes a lack of realization about the necessity of fire insurance. In addition to expensive insurance premiums, sometimes, the companies' valuation of the businesses is lower than their actual valuations, and they do not pay out enough during a claim. The research presents an improvement plan that, when presented at the traditional markets, may strengthen their ability to procure fire insurance through the help of the central government. Researchers connected with the traditional market mainly accomplish the initial research. However, although this research has its limitations, it offers considerable benefits. For future researchers, I would suggest looking at several regions for comparison.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.2
• /
• pp.317-326
• /
• 2012

Objectives : This study aims to examine satisfaction of dental treatment and revisit and intention of recommendation to dental patients and to supply as a basic resource for dental management improvement. Methods : 645 dental patients to dental hospitals in G City were subjects of this study. 27 dental hospitals were randomly chosen per 5 or 6 in 5 Districts. The intention of the survey was explained to 645 patients and it was agreed to have questionnaire survey. Questionnaire survey was carried out for 2 weeks in April 2011. Total 593 were used for the analysis except for insufficient answer sheets. The analysis was executed by using SPSS 18.0 and the results are as follows. Results : 1. The highest figures are as follows: female was 53.29% in sex, 20-29 age group was 44.52%, graduates of university were 38.62%, students were 28.50%, monthly family income with 300-399 million won was 31.70%. As to the treatment, dental caries were highest with 46.21% followed by scaling with 40.81%. As to the number of visit, 39.80% were over 5 times, and as to the opportunity to use, 29.34% answered it because it is close to home. 2. As to satisfaction, male was 4.15, over 60years old was 4.58, self-employed was 4.33, friendship with dentist as opportunity to use was 4.37. And as to revisit intention, over 60 years old was 4.60, over postgraduate in education level was 4.38, self-employed was 4.43, over 5 times visit was 4.32, and fame as opportunity to use was 4.39 which were the highest. As to the intention of recommendation to others, female was 4.24, over 60 years old was 4.65, self-employed was 4.36, friendship with dentist as opportunity was 4.43 which were the highest and showed significant differences (p<0.05). 3. As to patient satisfaction, there were strong relevance between revisit intention and intention of recommendation with 0.769 and 0.744 respectively. And, as to revisit intention, it had significant relation with revisit intention with 0.791. 4. The explanatory power of the regression analysis on the factors affecting revisit intention was 61.20%. The revisit intention was high when the satisfaction of dental hospital was high (${\beta}$=0.767, p<0.001), the number of visit (${\beta}$=0.026, p<0.01), reason for a visit (${\beta}$=0.070, p<0.01), education level (${\beta}$=-0.063, p<0.05) and occupation (${\beta}$=0.078, p<0.05). 5. The explanatory power of the regression analysis on the factors affecting intention of recommendation was 59.9%. The intention was taken patients satisfaction(${\beta}$=0.601, p<0.001), dental hygienist's kindness (${\beta}$=0.218, p<0.001), female (${\beta}$=0.079, p<0.05), reason for a visit(${\beta}$=-0.059, p<0.05), dissatisfaction treat(${\beta}$=0.084, p<0.05), dentist's kindness (${\beta}$=-0.080, p<0.05), age (${\beta}$=0.054, p<0.05). Conclusions : To improve revisit rate of patients, the refurbishing hospital facility, treatment and kindness of dental hygienists and satisfaction of treatment must be improved. And it also needs to accept complaint from female patients in a positive manner, and understand and correct complaints actively from the perspective of patients.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.21 no.3
• /
• pp.1-13
• /
• 2022

This study is a case study to identify the spatial composition and structural problems of existing schools for spatial innovation as a future school that can operate a credit system for old high schools and establish a mid-to-long-term arrangement plan as a credit system operating school capable of various teaching and learning in the future. The study results are as follows: First, most of the problems of the old high schools entailed that there was very poor connectivity between buildings as most of them were arranged in a single, standard design-type unit building and distributed in multiple buildings. In addition, the floor plan of each building is suggested to be a structure in which student exchange and rest functions cannot be achieved during the break period due to the spatial composition of the classroom and hallway concepts. Second, in the direction of the high school space configuration for future school space innovation, the arrangement plan should be established by reflecting the collective arrangement in consideration of the shortening of the movement route and the expansion of subject areas due to the movement of students on the premise of the subject classroom system. Moreover, it is desirable to provide a square-type space for rest and exchange in the central area where communication and exchange are possible according to the moving class. Third, as the evaluation criteria for relocating old high schools, a space program is prepared based on the number of classes in the future, and legal analysis of school land use and land use efficiency analysis considering regional characteristics are conducted. Based on such analysis data, mid-to-long-term land use plans and space arrangement plans for the entire school space such as the school facility complex are established.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.63-74
• /
• 2006

During the construction of circular underground pipe, the non-proper compaction along the pipe and the decrease of compaction efficiency have been the main problems to induce the failure of underground pipe or facility. The use of CLSM (controlled low strength materials) should be one of the possible applications to overcome those problems. In this research, the full-scaled field test and the numeric analysis using PENTAGON-3D FEM program were carried out for three different cases on the change of backfill materials, including the common sand, the soil from construction site, and the CLSM. From the full-scaled test in field, the use of in-situ CLSM as backfill materials reduced the vertical and lateral deformation of the pipe, as well as the deformation of the ground surface. The main reason for reducing the deformation would be the characteristics of the CLSM, especially self-leveling and self-hardening properties. The measured earth pressure at the surround of the corrugated pipe using the CLSM backfills was the smaller than the other cases, and the absolute value was almost zero. Judging from the full-scaled field test and FEM analysis, the use of CLSM as backfill materials should be one of the best choices reducing the failure of the underground pipes.

• Culinary science and hospitality research
• /
• v.18 no.4
• /
• pp.148-165
• /
• 2012

The purpose of this study is to investigate window bakery employees' knowledge levels and performance in food sanitation. The questionnaire consists of education, knowledge and management levels for food sanitation. A total of 300 copies of questionnaire were distributed to window bakery employees, and 295 copies were used for the study among them. In the knowledge analysis of food sanitation, it had the highest percentage of correct answers for 'Clip fingernails short and do not use nail polish,' but the lowest rank for 'Foodborne disease breaks out mainly in summer time.' In sanitary management performance, 'Clip fingernails short and do not use nail polish'(4.67) and 'Wash hands after using toilet'(4.67) items showed high scores, but 'Have and use hand washer'(3.12) showed the lowest score as a result of knowledge analysis. The sanitary knowledge by job title showed that the scores of general managers were generally lower than those of others. The employees who had working duration less than 1 year had a high score in sanitary knowledge levels. The more the education of sanitation, the better the knowledge of sanitation. In sanitary management performance levels, the scores were high in personal hygiene, ingredients & preparation hygiene, facility & workplace hygiene in order. The scores of sanitary management performance levels were low for the employees who had less than 1 year working duration. The employees who had no sanitary training showed the low knowledge and sanitary management practice levels(p<0.05). The analysis of each question about sanitary management performance levels by age, job titles, frequency of sanitary education, and checklists revealed that the employees who had no sanitary training or no checklist showed the low sanitary management performance levels overall.