• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.481-484
• /
• 2008

Recently, the recycling and reusing of construction and demolition waste concrete is urgently required because waste concrete is greatly increased according to the rapid increasing of urban redevelopment project, but the problem solution for demand and supply unbalance of fine aggregate is urgently required because of the restriction of collecting sea fine aggregate. So the utilization of high quality recycled fine aggregate using construction and demolition waste concrete as new fine aggregate for construction industry is urgently. Accordingly, In this study, As recycled fine aggregate manufacturing technology with exceeding in economical efficiency, reduction efficiency of environmental load and quality improvement effect of recycled fine aggregate, it is to develop dry manufacturing system composed specific gravity separator of high-speed rotation impact type and centrifugal Force Powder Collector, etc. And it is to examine mechanism of recycled sand dry manufacturing system.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.2
• /
• pp.21-29
• /
• 2014

The use of filling material based on cement paste is inefficient at field construction because it needs a lot of the charging mass. In addition, it has environmental problem according to the large amount of cement use because its strength is also larger than criterion. The excavated soil with stabilizer can be used as the filling materials when the bored pile is constructed. Therefore, this paper describes field application of solidified soil for economical efficiency and environment-friendly. The static axial load tests and the load-transfer measurements were performed to examine the axial resistant behavior of the piles. As results, the flowability, segregation and bleeding, and bond strength of filling materials was a good performance than that of the existing cement paste. But the skin friction of pile by PDA was slightly decreased than that of the existing cement paste. However, as pile filling materials, and in terms of economics and environment, the applicability of filling material is considered very effective.

• Journal of the Korean Institute of Gas
• /
• v.13 no.6
• /
• pp.15-20
• /
• 2009

The number of compressed natural gas (CNG) vehicles have increased gradually by virtue of korea government's urban air quality improvement policy since 1998. Although the use of CNG as transportation fuel gives environmental benefits, there is a possibility of huge accidents from unexpected fire. Therefore, needs for the guarantee of safety are indispensible for the reliable operation of CNG vehicles. A check valve is a safety device which prevents leakage of the pressurized fuel charged in a fuel tank. Durability of this component should be guaranteed in spite of repeated operation. This research has performed durability tests of a CNG check valve regarding the repeated usage, extreme chattering, and the effect of compressor oil.Although a check valve used for CNG vehicle satisfies validation requirements in the test results, it has been found that problem in the function of leakage prevention in a check valve could take place in the case of prolonged exposure to compressor oil.

• Journal of Climate Change Research
• /
• v.8 no.3
• /
• pp.265-273
• /
• 2017

Recently the Paris Climate Change Accord has been officially put into effect, making global efforts to implement Greenhouse Gas (GHG) reductions, and also International environmental regulations in the automotive sector will be further strengthened. The electric vehicle, which minimizes the particulate matter generated by existing internal combustion engine automobiles, is evaluated as a representative eco-friendly automobile. However, charging the battery of an electric vehicle is not fully environment-friendly if it is fueled by electricity that is being generated by fossil fuels as an energy source. The energy generated by the photovoltaic power generation system, which is an infinite clean energy, can be used to charge an electric vehicle's battery. Currently, shortage of charging facilities, time of charging, and high battery prices are the problem of activating the supply of electric vehicles. This study is to build a conjunction between the EVBSS (Electric Vehicle Battery Supply System) and ESS (Energy Storage System), which can quickly supply the photovoltaic charged battery to the required demand. If the charged battery in the Battery Swapping Station (BSS) is swapped swiftly, it will dramatically shorten the waiting time for charging the battery. As a result, if the battery is rented when it is needed, electric vehicles can be sold without the cost of a battery, which accounts for a large portion of the total cost, then the supply of electric vehicles are expected to expand. Furthermore, it will be an important alternative to maneuver climate change by minimizing GHG emissions from internal combustion engine vehicles.

• Journal of the Korean Institute of Educational Facilities
• /
• v.26 no.3
• /
• pp.43-50
• /
• 2019

Nowadays, the knowledge of modern society through education has become more and more complicated. The education system and the educational philosophy have created various education systems and methods for each country due to the difference of history and culture. In Korea, there are various teaching methods in recent years. However, if the traditional teaching method in Korea is based on educating teachers with a good understanding of the contents taught, some foreign countries such as USA and Germany can express their thoughts of the total population. In this situation, this study researches cases of other countries that have different educational systems from ours. It compares the differences of social background, educational program, and educational space in Germany, Singapore and the United States. As a result of this study, the following contents can be derived. The educational program is based on the social background of each country and plans an educational space suitable for the education program. In Germany, the emphasis is on the students' experience and community consciousness rather than on the amount of knowledge, so a home base space is planned between the classrooms to solve the problem of lack of solidarity and belonging among the students who are lacking in the curriculum. Some practical courses are run in the community. In Singapore, educational programs are elite-oriented compared to the other country, and because of the typical tropical climate, educational facilities are characterized by a lot of common space in semi-exterior space. Many schools in the United States have IMC in the central part of their schools that adopt self-directed learning and discussion.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.36 no.2
• /
• pp.79-86
• /
• 2020

In order to accommodate the increase in urban population due to government-led national planning and economic growth, many buildings such as houses and business building were supplied. Although the building law was revised and managed to manage the supplied buildings, for the sake of economic benefit, there have been buildings that are enlarged or reconstructed without declaring building permits. In order to manage these buildings, on-site surveys were conducted. but it has many personnel consumption. To solve this problem, a method of using a satellite image and a manned aircraft is utilized, but it is diseconomical and a renewal cycle is long. In addition, it is not utilized to the height, and although it is judged by the shading of the building, it has limitations that it must be calculated individually. In this study, height of the building was calculated by using the unmanned aerial vehicle with low personnel consumption, and the accuracy was verified by comparison with the building register and measured value. In this study, spatial information was constructed using a fast unmanned aerial vehicle with low manpower consumption and the building height was calculated based on this. The accuracy by comparing the calculated building height with the building register and the actual measurement.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.1
• /
• pp.127-140
• /
• 1988

The management of sewage and rainfall runoff becomes an emerging problem with the growth of urban communities. From the uncontrollable excess intensity or amount of rainfall, the conditions of sewer surcharge or manhole overflow could be generated in the combined sewer network where municipal or industrial wastewaters and rainfall runoff flow. The predictive model far the prevention of property and human life losses from this inundation was studied in this research. In the development of a mathematical flow model for the combined sewer surcharge and overflow, the Preissmann Slot concept and the four-point implicit method of finite difference were utilized. For the usage in personal computer, the overlapping segment method that required less memory storage was adopted. Through the simulation of hypothetical sewer network, the conservation of discharge volume was checked, and the usefulness of the Preissmann Slot was assured from the temporal distribution of discharge and depth along the sewer network. Also the possible field application for the correction of sewer diameters and slopes in the design of sewer network which has no surcharge/overflow condition was suggested.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.507-517
• /
• 2017

This study suggests that the diversity of parks is necessary because the number of children, who are the main users in children's parks, is decreasing and the use of parks by older people is increasing. In particular, the present aging society is trying to propose a multi-purpose park to solve the problem of the elderly leisure. To do this, this study surveyed domestic and foreign children's parks and selected study sites to understand the usage patterns of children's parks. As a result of surveying the location of the park to select the study sites, most children's parks were found mostly in single family housing areas and multi-family housing areas. As a result of the survey, it was found that the children's parks consisted of streets and areas by the 'City Parks and Greenery Act' and they were uniform. This paper presents basic data for the development of a model for producing a multipurpose park that can be used for children's parks by the elderly. The subjects of this study were selected from 7 districts of Daegu city, which were classified into single family housing areas and multi-family housing areas. As a result, the arrangement of various facilities in the children's park is insufficient, and it was uniform without a design motive and contents. Therefore, the utilization rate of various age groups could be increased by developing a multi-purpose park model for a children's park.

• The Journal of the Korea Contents Association
• /
• v.14 no.10
• /
• pp.506-513
• /
• 2014

As a measure to overcome the limit of small city which is weak in spontaneous competitiveness and to improve the quality of environmental, cultural and economic life of dwellers, it analyzed the geographical characteristics of city, movement path, economic status and other simple problems comprehensively and produced the vague problem solutions for dwellers and the practical direction for design using the 3D simulation rendering in order to suggest the result to change the potential for urban policy into substantial alternative. Geochang-gun selected as research area is evaluated for the place with high symbolic value of bridge in terms of environment, and the new design development for this kind of public design can be the good measure to increase the competitiveness of the city. This research is to understand the direction of the bridge recreation project which provides the cultural space connecting with other areas and improves the competitiveness of small city and to suggest the appropriate bridge design in order to provide the reasonable maintenance direction related to the future development of public design and the achievement of the symbolism of the region and to suggest the examples of public design for the urban competitiveness. For this purpose, focusing on Wicheon-stream in Geochang County, Gyeongsangnam-do selected as the research and development area for bridge design, it is to design the concept design bridge newly emphasizing the symbolism of bridge-oriented city for the development of future city.

• Geophysics and Geophysical Exploration
• /
• v.7 no.2
• /
• pp.148-154
• /
• 2004

This article reviews the development of three-dimensional (3-D) magnetotelluric (MT) modeling. The 3-D modeling of electromagnetic fields is essential in understanding the physics of MT soundings, and in implementing an inversion method to reconstruct a 3-D resistivity image. Although various numerical schemes have been developed over the last two decades, practical methods have been quite limited. However, the recent rapid improvement in computer speed and memory, as well as the advance in iterative solution algorithms for a large system of equations, makes it possible to model the MT responses of complex 3-D structures, which have been very difficult to simulate before. The use of staggered grids in finite difference method has become popular, conserving a magnetic flux and an electric current and allowing for realistic discontinuous fields. The convergence of numerical solutions has been greatly accelerated by adopting Krylov subspace methods, proper preconditioning techniques, and static divergence corrections. The vector finite-element method using edge elements is also free from the discontinuity problem, and seems a natural choice for modeling complex structures including irregular topography because its flexibility allows one to capture full geometric complexity.