• Journal of Korean Society on Water Environment
• /
• v.23 no.6
• /
• pp.961-965
• /
• 2007

In this study, degradation of carbohydrates and composition of fermentative products were investigated in semi-continuous acid fermenter varying hydraulic retention time (HRT). Rice soup was used as a sole substrate for the acid fermentation. Solubilization efficiency of the substrate was higher than 70% for all HRT, however the gas conversion was ignorable implying that most of organic contents in the influent remained in the form of volatile fatty acids (VFAs) and ethanol after acid fermentation. The VFAs were the predominant product and the VFAs conversion increased as the HRT decreased. The VFAs conversion reached the maximum value at 12 hr HRT accounting for 70% of the influent COD. Similar to VFAs, ethanol conversion was increased with the decrease of HRT and the maximum ethanol conversion efficiency was 8% at the HRT of 12 hr. Composition of VFAs was markedly dependent on HRT. As HRT increased, the composition of acetic acid was increased as a product of acetogenesis from butyrate, valerate and ethanol. This study demonstrated that HRT affected acid fermentation of a carbohydrate containing organic wastes producing VFAs and ethanol which could be effectively used to compensate the lack of carbon in wastewater for biological nutrient removal.

• Journal of Korean Society on Water Environment
• /
• v.37 no.1
• /
• pp.1-9
• /
• 2021

The depletion of dissolved oxygen (DO) in urban streams has a profound effect on the aquatic ecosystem; however, the change in DO by resuspension of sediments and the cause have not been sufficiently investigated. In this study, the physicochemical properties (particle size, and the content of organic and heavy metals) of the sediments of an urban stream (Anyang Stream) and the characteristics of water quality changes (DO, dissolved organic carbon (DOC), dissolved nitrogen (DN), sediment oxygen demand (SOD), and adenosine triphosphate (ATP)) by sediment resuspension were investigated. The sediment content of fine particles (< 0.2 mm) increased from 36.7% to 52.7% from the upstream to the downstream, and the contents of heavy metals and organic matter of the sediment were also higher towards the downstream. The depletion of DO by resuspension was observed in the sediment at the downstream sites (P8, P9), where the fine particle content was high, and biological SOD (BSOD) was more than 88% compared to the total SOD. The increase in BSOD coincided with the increase in ATP. It was also confirmed that the depletion of DO could increase the amount of heavy metals (such as Fe, Mn, and Pb) released from the sediment. Based on the above results, it can be concluded that resuspension of sediments induces rapid water quality changes and may cause accidents, such as fish mortality, during rainfall, and such a water quality effect can be more pronounced in sediments with a high content of fine particles and organic matter and high biological activity.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.488-490
• /
• 2009

The Spatial Image contents of Geomorphology 3-D environment is focused by the requirement and importance in the fields such as, national land development plan, telecommunication facility management, railway construction, general construction engineering, Ubiquitous city development, safety and disaster prevention engineering. The currently used DEM system using contour lines, which embodies geographic information based on the 2-D digital maps and facility information has limitation in implementation in reproducing the 3-D spatial city. Moreover, this method often neglects the altitude of the rail way infrastructure which has narrow width and long length. This As the results, We confirmed the solutions of varieties application for railway facilities management using 3-D spatial image contents and database design. Also, I suggested that U-city using topographical modeling about matching methods of high density elevation value using 3-D aerial photo with laser data are best approach for detail stereo modeling and simulation. There for of this, Using of rapid spatial information generation by various images and laser data through matching methods for the make of Spatial data base management inplementation are very powerful and much application of our life and real worlds.

• Journal of Environmental Science International
• /
• v.27 no.5
• /
• pp.291-297
• /
• 2018

Vertical farming systems offer many advantages in urban spaces. They have also been proposed as an engineering solution to increase the productivity per unit area of cultivated land by extending crop production in the vertical dimension. However, soil water retention is a major constraint affecting the plant environment. This study analyzed the effects of growth environment of Tropaeolum majus and Fragaria spp., on the vertical farming system, by using four different types of cover material types including sphagnum moss (Control), a shading net (S.N.), multi-layered fabric (M.L.F.), and non-woven fabric (N.W.F.). The volumetric soil moisture contents and plant characteristics were investigated from May to September 2014. Plant materials were individually cultivated in hanging baskets measuring $30{\times}17{\times}17cm$, filled with a mixture of soil and perlite, and placed at 1.5m height. Each treatment was performed in quadruplicate and consisted of five plants, amounting to a total of 20 plants. The analysis indicated that different covers were associated with multiple functions and soil water retention improvements may have a positive impact on the vertical farming system. The difference in soil water retention increased in the following order: M.L.F. > Control > N.W.F. > S.N.. Furthermore, the differences in plant height and survival rate increased in the following order: M.L.F. > Control > N.W.F. > S.N. Therefore, M.L.F yielded satisfactory good response for the vertical farming system of cover materials. Our results clearly demonstrate that vertical spaces represent an attractive alternative to urban farming and suggest that further increases in yield may be achieved via different cover materials in vertical farming using hanging baskets.

• Spatial Information Research
• /
• v.22 no.5
• /
• pp.27-41
• /
• 2014

Recently, BIM(Building Information Modeling) has been applied to the infrastructure such as road and bridge, and information about the outside environment of buildings is needed for maintaining and managing the large urban facilities. In addition, the convergence between spatial information and Big-data has a large potentiality, in respect that considerable profits and developments in other application problems such as various simulations and urban plans, national land security, may be brought about on the basis of the interoperability of information between BIM and GIS. Therefore, this study attempted to suggest the development direction of a model integrating building for spatial information analysis and city on the subject by comparing and analyzing difference between information system and shape expression of IFC, CityGML and LandXML to efficiently link information between IFC as a standard model of BIM and CityGML as a standard model in the GIS sector and to prepare a basic fusion strategy and a method of utilization between BIM and GIS. The result of the study are as follow. Firstly, contents and structure of IFC, CityGML and LandXML are compared and analyzed. Secondly, the development direction of iBUM(Integrated Building and Urban Model) suggested, which is based on convergence technology for analysis of space information. Finally, a strategy and method of the BIM and GIS are proposed in the iBUM environment.

• The Journal of the Korea Contents Association
• /
• v.18 no.7
• /
• pp.388-400
• /
• 2018

Small houses are continuously supplied after the alleviated housing act enacted in 2009. This study aimed to conduct a survey among an expert group associated with small house construction, propose problems by discovering difficulties and vulnerable points small and medium-sized construction companies experience while launching construction works as well as factors that impede the safety and housing environment of small houses. Furthermore, it ultimately intends to propose improvements. First, low-priced order is a major cause of unreasonable contract. Most companies were found to have low-priced orders in order to manage order performance. Low bidding and low-priced order are implemented to maintain construction businesses, ultimately threatening the safety environment of buildings. In addition, it is assumed that moderate bid periods and construction periods should be guaranteed. Second, work standardization for small and medium-sized companies is needed due to numerous cases that failed to meet order process. Additionally, regular instruction is required as many employees are not fully aware of relevant contents. Third, the most urgent policy direction turned out avoidance of low-priced bidding and removing insolvent enterprises from the market. Small and medium-sized construction companies that primarily build small houses undergo poor work condition. Therefore, the safety environment of small houses should be enhanced through work standardization and avoiding low-priced order.

• Journal of the Korea Furniture Society
• /
• v.20 no.6
• /
• pp.566-574
• /
• 2009

Recent tendency in modern society for urban design and public space forming it recommended diversity of studies and design development, for the interest in urban design is increasing. In particular, street furniture being one of the important components to construct public space has been researched and developed in aspects of formative and emotional style, broken from the old way of the function-oriented purpose. It could be said that this results from the desire of human pursuing a well-off life, the new value standard regarding design and the life styles in mode. The new development of street furniture could be a creating the value-added source potentially being able to raise community, identity of nation and international competitiveness, beyond the primary purpose, namely the improvement of surrounding environment, and therefore the most of countries in the world are concentrating their life and death on development of design in reality. For this investigation the concept of city design, the basic content analysis of the street furniture and also the contents in the related sectors were reported. In order to develop the bench design, one of the representative items of the street furniture furthermore it was proceeded that basic process for the design like data searching for the object place and the existing case studies. On the basis of this the series of the design development processes such as idea sketch, computer rendering and drawing work were described step by step. The aim of this study is therefore to contribute in compiling the development processes of bench design as a new shape into a data and in utilizing it as a design case study and research material in the related sectors.

• Journal of Korean Society for Atmospheric Environment
• /
• v.8 no.4
• /
• pp.221-228
• /
• 1992

In order to evaluate the degree of air pollution, soils from 125 and 60points of main streets of Seoul and Daejeon, respectively, were sampled and analyzed for the contents of lead, copper, iron and zinc by nitric acid($HNO_3$) extraction followed by atomic absorption spectrophotometry during June and September, 1990. The Pb contents of Seoul and Daejeon were 350.2$\mu$g/g and 175.9$\mu$g/g, respectively, which were 14.5times and 7.3times respectively higher than the control(24.0). In Seoul, the commercial area gave the highest value followed by resdential and industrial areas in the decreasing order, while the order in Daejeon was Industrial, commercial and residential areas. The Cu contents in Seoul and Daejeon were very similar(236.6 and 234.6, respectively) each other, and about 11times higher than the control(20.9). The concentration was highest in industrial, followed by commercial and the lowest in residential areas in Seoul, while the order in Daejeon was industrial, residential and commercial areas. The Fe contents were 25716.5 in Seoul and 22838.6 in Daejeon, both being similar to the control value(22537.0). The value was highest in industrial and next in commercial areas and the lowest in residential area both in Seoul and Daejeon. The Zn contents in Seoul and Daejeon were 728.2 and 404.0, respectively, wihch were 6.3 and 3.6times higher than the control(113.3). The value was highest in commercial and next in industrial areas and the lowest in residental area in Seoul, while the order was industrial, residential and commercial areas in Daejeon. The heavy metal content was higher in the soil of main streets than that of minor streets in Seoul. The content of lead in Seoul was higher in the streets of Chongro-ku(525.9) and Chung-ku(684.8), the central area of the city which had a heavy traffic, than those in Nowon-ku(320.3) and Kwanak-ku(312.6) which had relatively less traffic crowd. The similar pattern was observed in the content of zinc; it was higher in Chongro-ku(1305.0) and Chung-ku(1335.4) than in Nowon-ku(489.1) and Kwanak-ku(569.8). In Daejeon, the contents of lead and zinc were decreasing as the distance from Daejeon Railroad Station increased : they were respectively 157.8 and 447.7 within 2km from the station, 157.6 and 235.7 with in 2-4km, and 63.5 and 156.2 within 4-6km and 58.7 and 142.2 within 6-8km. In summary, the contents of lead, copper and zinc were generally higher in the central area of the city, areas of heavy traffic and areas of industry and commerce.

• The Journal of the Korea Contents Association
• /
• v.21 no.1
• /
• pp.139-146
• /
• 2021

Ahead of the commercialization of autonomous vehicles, it's application should be considered into the current transportation infrastructure. Under limited traffic circumstances, effective set of lane change rules alone could bring benefits to the autonomous driving system. In this study, a cooperative movement (local platooning) plan with limited vehicles associated as pocket driving, aiming at effective movement between vehicles in urban environment was proposed. Under congested roadway condition, the gaussian gap between vehicles was introduced to secure gap acceptance for safe lane change maneuver. Proposed lane change method showed 86.6% delay reduction along with traffic volume improvement. This result could be considered as a crucial factor in designing a next-generation roadway infrastructure with autonomous driving.

• Journal of Korea Technology Innovation Society
• /
• v.8 no.1
• /
• pp.209-219
• /
• 2005

o Korea consumed total 198.5 million TOE and the portion of crude oil n was 100.4 million TOE in 2002 which marked the 10th largest energy consuming country and ranks the $4^{th}$ crude oil consumer in the world. o Industries consumed 51.5% of the total energy and 93% of industrial energy was used at the manufacturing industries such as steel, textile, chemical, food and beverage, pulp and paper, and timber industries, which lead to energy intensive industries numbered 110,000. o Also Korea ranks the $10^{th}$ greenhouse gas emission countries of the world (134.9 million TC) which may cause Korean industries to suffer severely during the implementation of United Nations Framework Convention on Climate Change (UNFCCC). o Therefore, the target of the study is to develop a model for the analysis and design of industrial complex by integration of the energy usage and environmental problems. o The research work contents are as followings: -Analysis of Korea energy consumption -Concept of the integration of energy and environment problems - Basic concept of industrial complex planning - Case study (1) - Recommendation and conclusion