• 한국사회복지학
• /
• 제61권2호
• /
• pp.33-60
• /
• 2009

본 연구는 대한주택공사(KNHC)의 국민임대주택 거주자들의 퇴거 이후 주거이동 유형이 상향이동되었는가 혹은 수평 하향이동되었는가를 비교분석하여 국민임대 주택이 무주택 저소득 가구의 주거 상향이동에 실제로 기여를 하고 있는가 살펴보았다. 연구대상은 충북 청주시 국민임대주택 입주 후 2년이 경과한 세 단지의 2007년 1년간 퇴거자 333명을 대상으로 하여 전화설문조사를 실시하였고, 분석방법은 "주거면적"과 "주거비용"에 따른 주거이동 유형(하향이동, 수평이동, 상향이동)을 종속변수로 하고 개인 및 가족환경과 경제적 환경을 독립변수로 하여 빈도분석, 교차분석, 다중회귀분석을 활용하였다. 분석결과 입주 전과 거주 당시보다 "주거비용"에 있어서 상향이동 된 가구의 비율은 76.4%, 수평이동 1.6%, 하향이동 22%로 나타났고, "주거면적"에 있어서는 상향이동 61.8%, 수평이동 16.5%, 하향이동 19.7%로 나타났다. 주거상향이동에 영향을 주는 변수로는 가구 내 소득자의 수, 직업, 학력으로 나타났고, 소득과 연령, 부양가족 여부는 영향이 미미한 것으로 나타났다. 이상의 결과를 바탕으로 효과적인 국민임대주택의 공급을 위해 첫째, 주거이동 유형에 따라 나타나는 다양한 가구 특성을 반영해야 하며 둘째, 주거 상향이동을 위한 연속적인 주거정책 프로그램을 위한 국민임대주택단지의 자족기능 강화를 제언하였다.

• 감성과학
• /
• 제26권1호
• /
• pp.87-100
• /
• 2023

본 연구는 초기 성인의 조건부 자아존중감이 열등감에 미치는 영향에서 SNS 상향비교와 SNS 이용동기가 어떠한 역할을 하는지 탐색하고자 하였다. 선행연구를 토대로 각 변인들의 관계에 대한 연구모형을 설정하여, 조절된 매개 효과를 검증하고자 하였다. 이를 위하여 온라인 설문지를 구성한 후, SNS를 이용하는 초기 성인 400명을 대상으로 설문조사를 실시하였으며, 최종적으로 총 351부를 분석에 활용하였다. 본 연구의 주요 결과는 다음과 같다. 첫째, 조건부 자아존중감, SNS 상향비교, SNS 이용동기, 그리고 열등감은 모두 정적 상관을 나타내었다. 둘째, 조건부 자아존중감이 열등감에 영향을 미쳤으며 SNS 상향비교는 완전 매개하였다. 셋째, SNS 상향비교와 열등감의 관계에서 SNS 이용동기의 조절을 확인하였다. 마지막으로, 조건부자아존중감이 SNS 상향비교를 매개로 열등감에 미치는 간접효과를 SNS 이용동기의 영향으로 조절하는 것을 확인하였다. 본 연구 결과를 바탕으로 초기 성인이 열등감을 경험하는 것과 관련하여 심리적이고 정서적인 함의를 제시하였다.

• 한국주조공학회지
• /
• 제10권1호
• /
• pp.50-56
• /
• 1990

Continuous casting of the $Al-Al_3Ni$: eutectic composite was carried out by the upward continuous casting process. The morphology of the eutectic growth and the stability of solid-liquid interface were investigated under various growth conditions in an upward continuous casting. The effect of growth conditions on the mechanical properties of the $Al-Al_3$ Ni eutectic composit was also investigated, and the results were compared with those by the Bridgman method. As for the results, it was possible to get the planar solid-liquid interface at the condition of $G_L/R$＝$1.04{\times}10^3^{\circ}Csec/mm^2$. And the inter-rod spacing of $Al-Al_3Ni$ eutectic composite was decreased with the increase of pulling speed. The reduction of inter-rod spacing & value of $G_L/R$ caused the increase of ultimate tensile strength in $Al-Al_3Ni$: eutectic composite. The ultimate tensile strengths of $Al-Al_3Ni$ by the upward continuous casting were higher then those by the Bridgman method.

• Computers and Concrete
• /
• 제19권1호
• /
• pp.1-6
• /
• 2017

Prestressed concrete I-girders are subject to different load types at their construction stages. At the time of strand release, i.e., detensioning, prestressed concrete girders are under the effect of dead and prestressing loads. At this stage, the camber, total net upward deflection, of prestressed girder is summation of the upward deflection due to the prestressing force and the downward deflection due to dead loads. For the calculation of the upward deflection, it is generally considered that prestressed concrete I-girder behaves linear-elastic. However, the field measurements on total net upward deflection of prestressed I-girder after detensioning show contradictory results. In this paper, camber calculations with the linear-elastic beam and elastic-stability theories are presented. One of a typical precast I-girder with 120 cm height and 31.5 m effective span length is selected as a case study. 3D finite element model (FEM) of the girder is developed by SAP2000 software, and the deflections of girder are obtained from linear and nonlinear-static analyses. Only geometric nonlinearity is taken into account. The material test and field measurement of this study are performed at prestressing girder plant. The results of the linear-elastic beam and elastic-stability theories are compared with FEM results and field measurements. It is seen that the camber predicted by elastic-stability theory gives acceptable results than the linear-elastic beam theory while strand releasing.

• 한국공작기계학회논문집
• /
• 제10권4호
• /
• pp.55-64
• /
• 2001

In this study, hemisphere and cylindrical shapes were machined for different tool paths and machining conditions with ball endmill cutters. Tool deflection, cutting forces and shape accuracy were measured according to the inclination position of the sculptured surface. As the decreasing of inclination position angle, the tool deflection was increased due to the decreased cutting speed when the cutting edge is approaching toward the center. Tool deflection when upward cutting is obtained less than that of downward cutting and down-milling in upward cutting showed the least tool deflection for the sculptured surface. Roundness values were found in least roundness error when down-milling in upward cutting. It is obtained the very little difference between 90。and 45。 of inclination position angle. The best surface roughness value was obtained in upward up-milling and showed different tendency with tool deflection and cutting force. For down-milling, the cutting resistance of the side wall direction is larger than that of feed direction. Therefore, this phenomenon which is received over cutting resistance can be caused of chatter.

• 한국운동역학회지
• /
• 제23권4호
• /
• pp.307-318
• /
• 2013

The purpose of this study was to analyze the kinematic variables of glide kip motion on the uneven bars through a two-dimensional cinematography. Three expert female gymnastics players were involved in the data gathering process. The followings were concluded according to the results. The arm, trunk and leg segments were fully extended throughout the kip movement. The whole body center of gravity showed the biggest changes during 66 to 87% of the kip motion. During the kip phase, the horizontal displacement of the leg was greater than the vertical displacement the leg. Glide kip motion should be done in orders of upward movement of leg, forward movement of leg, upward movement of trunk and forward movement of trunk segment. It was found that trunk segment and hip joint movements showed bigger changes than those of leg segment and shoulder joint in the glide kip motion. The largest angular velocity of hip joint was shown in the middle of the kip Phase. In conclusion, effective kip movement could be resulted when the trunk was displaced posterior-upward direction with fast hip joint extension after the leg segment was elevated upward and thrusted forward in advance.

• 보건의료산업학회지
• /
• 제8권1호
• /
• pp.51-64
• /
• 2014

The purpose of this study was to investigate the relationship among staffing, occupancy rate, upward level change of long-term care need, and evaluation grade of facility. Data were obtained from National Health Insurance Corporation Database. Occupancy rate and evaluation grade were highest in National/public operating facilities, while they were worst in individual operating facilities. The percents of A or B grade in evaluation grade (by newly enforced law) is highest in National/public operating facilities. Multiple regression analysis showed that upward level change of care needs was very weakly associated with the number of doctors. Evaluation grade showed a weak and significant association with occupancy ratey(by old-version law)(r=.20, p<.01), upward level change of care need in group home(r=.23, p<.01) Staffing in facility did not show significantly consistent association with upward level change of care needs, evaluation grade, and occupancy rate.

• Nuclear Engineering and Technology
• /
• 제47권5호
• /
• pp.513-522
• /
• 2015

The present paper aims at improving the modeling of turbulence for the upward turbulent bubbly flow through the use of experimental databases that contain data on small and large vertical ducts. First, the role of bubble-induced turbulence was analyzed, which indicated the dominant role of the bubble-induced turbulence in the duct center for relatively high void fraction cases. Therefore, the turbulence therein was mainly focused on, which indicated that the stronger turbulence could be induced by bubbles in large ducts with similar void fractions as compared to that in small ducts. Next, the turbulence of upward turbulent bubbly flow near the wall is discussed to understand the interaction between the wall-induced and bubble-induced turbulence. It showed that the existence of a wall could suppress the bubble-induced turbulence given the same void fraction, and the existence of bubbles could also suppress the solely wall-induced turbulence as compared to the single-phase turbulent flow, even though the total turbulence is enhanced. The above characteristics indicated that the current turbulence modeling method needs to be modified, especially when the bubble-induced turbulence plays a dominant role.

• 한국IT서비스학회지
• /
• 제21권2호
• /
• pp.43-59
• /
• 2022

This study investigates an association among Facebook users' upward comparison (e.g., envy), social support (e.g., favorable comments and like), and life satisfaction, putting their self-esteem as a mediating variable. For this analysis, 1,332 female and male Facebook users in Seoul and other four cities in South Korea were surveyed. Structural equation modeling including confirmative factor analysis were employed as quantitative analysis methods. Results show that Facebook users' upward comparison with other users and social support significantly impact their satisfaction mediated by their self-esteem. Specifically, when users feel envious of other users, this emotion lowers their self-esteem, and subsequently, the self-esteem reduces their satisfaction. On the other hand, sufficient social support for users positively affects their self-esteem, which leads to the increase of their satisfaction. The present study is differentiated from previous studies in that it focuses on Facebook users' emotional changes in the process of sharing massive amounts of posts and finds a stepwise relationship among their feelings, including self-esteem as a mediating variable. Additionally, this study is the first to verify a situation when Facebook users' envy of other users' posts affects the decline in their satisfaction through the mediation of their self-esteem.

• 동의신경정신과학회지
• /
• 제33권4호
• /
• pp.485-495
• /
• 2022

The purpose of this study is to report a case of a patient with pattern identification of liver fire flaming upward and metabolic syndrome improved by Korean medicine. The patient felt completely lost. She was treated for headache, insomnia, and metabolic syndrome with Korean medicine and psychotherapy. Pittsburgh Sleep Quality Index (PSQI), Insomnia Severity Index (ISI), Pattern Identification Tool for Insomnia (PIT-Insomnia), Minnesota multiphasic personality inventory-2 (MMPI-2), and bioelectrical impedance analysis (BIA) were used for assessment. During treatment for six months, the patient stopped taking headache pills. Her blood pressure was stabilized. Her body weight, body fat, body mass index (BMI), and visceral fat decreased significantly. The sum of ISI, PSQI, PIT-insomnia also decreased significantly. Her Ego strength increased in the MMPI-2 supplementary scale. We assume that Korean medicine treatment through acupuncture, herbal medicine, and psychotherapy is effective in treating pattern identification of liver fire flaming upward and metabolic syndrome.