• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.1
• /
• pp.21-31
• /
• 2018

This study aimed to investigate the correlation between the inclinations of the incisors and lips in mixed dentition aged 7 - 11 years. Lateral cephalometric radiographs of 353 children were analyzed to measure the upper incisor inclination, lower incisor inclination, lower-nasolabial angle, and mentolabial angle in relation to the skeletal malocclusion classification. The measurements were then assessed using the Kruskal-Wallis test, Pearson correlation, and multiple regression analysis. There were significant negative correlations between the inclination of the upper incisors and lower-nasolabial angle in all classes of skeletal malocclusion. There was a negative correlation between the inclination of the lower incisors and mentolabial angle; however, class II malocclusion had a significant positive correlation. This study identified the factors that affect lip inclination and verified their associations.

• Journal of dental hygiene science
• /
• v.13 no.2
• /
• pp.203-212
• /
• 2013

The tooth morphology and qualitative mineral contents on enamel surface using energy dispersive X-ray spectroscopy, (EDX) were examined in the white-toothed shrew (genus Crocidura ) Crocidura lasiura and C. suaveolens and the red-toothed shrew (genus Sorex) Sorex caecutiens. In the case of C. lasiura and C. suaveolens, dental formula was found I 3/1 C1/1 P1/1 M3/3=28. The upper 1st and 2nd molars had an unequal W-shape formed by 5 cusps on the crown. The 3rd molar was found one-third the size of those of 1st and 2nd molars. The upper 1st incisor had two different sized hook-shapes and the lower 1st incisor was even. In the case of S. caecutiens, dental formula was found to be I3/1 C1/1 P3/1 M3/3=32. The upper 1st and 2nd molars had an equal W-shape on crown. The upper 3rd molar was half the size of those of the other molars. The upper 1st incisor possessed two similar sized hook-shapes and the lower 1st incisor had an uneven and serrated form. A comparison with the dental and cranial measurements revealed C. lasiura to be the largest of the three species (p<0.001) and C. suaveolens and S. caecutiens were similar in size (p>0.05). A qualitative analysis of mineral contents on enamel surface of the lower 1st incisor and lower 1st molar using EDX revealed C, O, P, Ca and Cu in all specimens and Pb was detected in several enamel specimens. No significant differences in the mineral contents (% weight) were observed among the three species (p>0.05). Fe was only detected on enamel surface of S. caecutiens with red pigmented teeth. Therefore, Fe is responsible for the red tip of the teeth. These results suggest that tooth morphological characteristics including the color of the tooth tip might be used as the key classifying species belonging to Crocidura and Sorex.

• The korean journal of orthodontics
• /
• v.28 no.6 s.71
• /
• pp.937-946
• /
• 1998

The patient with an anterior open bite has one of the most difficult orthodontic problem to correct. Previous studies have yielded different conclusions as to exactly where the morphologic problems associated with vertical dysplasia-high angle cases are located. In order to identify the cephalometric features of high angle cases and highlight the measurements that characterize high angle cases, 109 pretreatment cephalograms, 35 high angle, 37 average angle, and 37 low angle cases, were analyzed and compared statistically. As the mandibular plane was steeper, the anterior facial height, especially lower anterior facial height, became greater, and the posterior facial height became smaller. All the dentoalveolar vertical dimensions, especially in upper, increased. And all the skeletal angular measurements increased. Especially Lower genial angle had most positive correlation to mandibular Plane angle. Upper incisor was lingually inclined, and lower incisor was labially inclined in high angle cases.

• The korean journal of orthodontics
• /
• v.52 no.1
• /
• pp.53-65
• /
• 2022

Objective: Planning of incisal position is crucial for optimal orthodontic treatment outcomes due to its consequences on facial esthetics and occlusion. A systematic summary of the proposed parameters is presented. Methods: Studies on Google Scholar^©, PubMed^©, and Cochrane Library, providing quantitative information on optimal central incisor position were included. Results: Upper incisors supero-inferior position (4-5 mm to upper lip, 67-73 mm to axial plane through pupils), antero-posterior position (3-4 mm to Nasion-A, 3-6 mm to A-Pogonion, 9-12 mm to true vertical line, 5 mm to A-projection, 9-10 mm to coronal plane through pupils), bucco-lingual angulation (4-7° to occlusal plane perpendicular on models, 20-22° to Nasion-A, 57-58° to upper occlusal plane, 16-20° to coronal plane through pupils, 108-110° to anterior-posterior nasal spine), mesio-distal angulation (5° to occlusal plane perpendicular on models). Lower incisors supero-inferior position (41-48 mm to soft-tissue mandibular plane), antero-posterior position (3-4 mm to Nasion-B, 1-3 mm to A-Pogonion, 12-15 mm to true vertical line, 6-8 mm to coronal plane through pupils), bucco-lingual angulation (1-4° to occlusal plane perpendicular on models, 87-94° to mandibular plane, 68° to Frankfurt plane, 22-25° to Nasion-B, 105° to occlusal plane, 64° to lower occlusal plane, 21° to A-Pogonion), mesio-distal angulation (2° to occlusal plane perpendicular on models). Conclusions: Although these findings can provide clinical guideline, they derive from heterogeneous studies in terms of subject characteristics and reference methods. Therefore, the optimal incisal position remains debatable.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.1
• /
• pp.144-155
• /
• 1995

It is well known that implants showing no clinical mobility are successfully osseointegrated and have good prognosis. When implants are under load, their mobility begins to increase. It is of necessity to substantiate whether excessive load is on or premature occlusal force is acting prior to desirable osseointegration. Using Periotest unit, we could measure the pattern of mobility change. Consequently, osseointegrated treatment has come to success by intercepting progressive mobility and doing perceptive treatment according to the result of Periotest Value(PTV). In this study, we took records of intangible mobility of 70 osseointegrated implants. And we also measured the mobility of periodontally sound natural teeth as a standard from 30 dental personnel. Conclusions were summarized as followings ; 1. Lower lateral incisor has the highest PTV, whereas lower canine, upper canine, lower premolars and lower 1st molar have the lowest PTV in natural dentition. 2. There are little significant statistical difference of PTV between men and women in both(natural and implant) dentition. 3. In general, lower natural teeth show lower PTV than upper counterpart. 4. Mandibular implants have lower PTV than those of maxillary implants. 5. All of the successfully osseointegrated implants have lower PTV than those of periodontally healthy teeth.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.1
• /
• pp.35-40
• /
• 1999

Recently, sagittal split ramus oseotomy and intraoral vertical ramus osteotomy have been commonly performed for the correction of mandibular prognathism, occurred to abundant oriental people. Many authors have studied the soft tissue change after orthognathic surgery, especially between mandibular hard tissues and soft tissue of lower lip, but the study of upper lip change is comparatively little. Therefore, we studied the 12 patients, operated only sagittal split ramus osteotomy without genioplasty or maxillary osteotomy in department of oral and maxillofacial surgery, Hanyang university hospital from 1996. 1. 1. to 1998. 7. 20. Preoperative and postoperative cephalometric view was measured to know the change of upper lip position and shape after mandibular setback. The result were obtained as follows. 1. The ratio of upper lip change amount to lower incisor horizontal movement was 15.1%. 2. The ratio of lower facial profile between Sn-Stm and Stm-Mes was changed from 1 : 2.352 to 1 : 2.069 after operation. 3. Post-operative upper lip was flattened 72.4% compared with pre-operative one. 4. The vermilion zone of the upper lip increased 56 % horizontally, 5.8% vertically after operation. 5. The vermilion zone ratio of the lower lip to the upper lip was changed from 1 : 1.253 to 1 : 1.348. 6. The distance between esthetic line and Ls was changed from -3.958mm to -1.15mm.

• The korean journal of orthodontics
• /
• v.34 no.5 s.106
• /
• pp.380-393
• /
• 2004

The Purpose of this study was to investigate the dentoalveolar compensation according to anteroposterior skeletal discrepancy in normal occlusion and to evaluate cephalometric parameters that quantitatively describe dental compensations. The study consisted of 90 subjects (50 males. 40 females) who were selected among specimens of normal occlusion at Seoul National, University Dental Hospital, Dept. of Orthodontics. Lateral cephalograms in centric occlusion were traced and digitized for each subject. According to the anteroposterior skeletal pattern the sample was divided into three groups. Cephalometric data were analyzed for the three groups using the SPSS program. Independent t-test, correlation analysis and regression analysis were carried out. The results were as fellows: Dentoalveolar compensation was found in upper and lower incisor inclination and occlusal plane inclination. As the mandible located anterior to the maxilla, the maxillary incisors incisors more labially. the mandibular incisors more lingually, and the occlusal plane continued to flatten. The dental parameters most correlated with anteroposterior skeletal discrepancy were L1 to SN and L1 to FH. Among the compensatory dentoalveolar changes, lower incisor inclination was strongly related to the anteroposterior jaw relationship and played au imposrtant role in obtaining a normal incisor relationship U1 to PtGn and L1 to APog were constant irrelevant to anteroposterior skeletal discrepancy.

• The korean journal of orthodontics
• /
• v.29 no.2 s.73
• /
• pp.197-207
• /
• 1999

Although there is a severe underlying skeletal deformity, the dentition has often maintained some occlusal contact and interdigitation by the teeth compensating in their positions for the skeletal problem, and these dental compensations are manifested in all three planes of space. The purposes of present investigation were 1) to study the pattern of dentoalveolar compensation of hyperdivergent skeletal pattern , and 2) to compare the dentoalveolar compensations of hyperdivergent skeletal pattern in children with adults. The samples selected for this study were consisted of 60 subjects in normal group, 60 subjects in hyperdivergent group. Each was divided into two subgroups by age ; child groups($8\~12yr$ old) and adult groups(17yr old over). The findings of this study were as follows; 1. In child, hyperdivergent subjects had smaller posterior lower facial height(p<0.01) and slightly longer anterior lower facial height than normal ones. In adults, they still expressed smaller posterior lower facial height and much longer anterior lower facial height than normal ones(p<0.01). 2. Hyperdivergent subjects had larger amount of upper and lower incisor relative eruption to their basal bone length than normal ones(p<0.05). In adult, relative eruption of upper incisor was increasing(p<0.05), although relative eruption of lower incisor remained the same as the child. 3. In child, there was no difference between hyperdivergent group and nomal one in the upper and lower molar relative eruption to their basal bone length. In adult, hyperdivergent group had target amount of upper molar relative eruption than normal ones(p<0.01), but relative eruption of lower molar was similar to normal ones. 4. Hyperdivergent group had larger angle between lower occlusal plane and mandibular plane than normal group(p<0.01). Upper occlusal plane of adult groups rotated more antero-superiorly than child groups, and adult hyperdivergent group had sleeper upper occlusal plane than normal group(p<0.05).

• The korean journal of orthodontics
• /
• v.43 no.6
• /
• pp.279-287
• /
• 2013

Objective: To investigate the dentoskeletal factors which may predict soft-tissue chin strain during lip closure. Methods: The pretreatment frontal and lateral facial photographs and lateral cephalograms of 209 women (aged 18-30 years) with Angle's Class I or II malocclusion were examined. The subjects were categorized by three examiners into the no-strain and strain groups according to the soft-tissue chin tension or deformation during lip closure. Relationships of the cephalometric measurements with the group classification were analyzed by logistic regression analysis, and a classification and regression tree (CART) model was used to define the predictive variables for the group classification. Results: The lower the value of the overbite depth indicator (ODI) and the higher the values of upper incisor to Nasion-Pogonion (U1-NPog, mm), overjet, and upper incisor to upper lip (U1-upper lip, mm), the more likely was the subject to be classified into the strain group. The CART showed that U1-NPog was the most prominent predictor of soft-tissue chin strain (cut-off value of 14.2 mm), followed by overjet. Conclusions: To minimize strain of the soft-tissue chin, orthodontic treatment should be oriented toward increasing the ODI value while decreasing the U1-NPog, overjet, and U1 upper lip values.

• The korean journal of orthodontics
• /
• v.21 no.2 s.34
• /
• pp.419-432
• /
• 1991

The purpose of this study is to observe how the Class III intermaxillary elastics act upon the craniofacial structures of mixed dentition with anterior crossbites. The cephalometric headplafes of 16 childrens treated only with Class III elastics (C III elastics group) and 23 childrens treated with Class III elastics and Reverse pull headgear simultaneously (C III elastics + RPHG group) were traced, digitized and statistically analyzed. The results were as follows. 1 . Anterior displacement of maxilla was observed in both groups. 2. Simultaneous Class III elastics and reverse pull headgear group showed the counterclockwise rotation of maxilla, however Class III elastics group manifested no rotational change of maxilla. 3. Simultaneous Class III elastics and reverse pull headgear group showed the downward and backward rotation of mandible, however Class III elastics group manifested no rotational change of mandible. 4. Counterclockwise canting of occlusal plane, labial tipping of upper incisor and lingual tipping of lower incisor and mesial displacement of upper molar to pterygoid root vertical were observed in both groups.