• The korean journal of orthodontics
• /
• v.50 no.1
• /
• pp.52-62
• /
• 2020

This case report presents the orthodontic treatment of a 25-year-old patient with skeletal Class II and severe maxillary arch crowding, moderate mandibular arch crowding, anterior crossbite, and a missing lower incisor. He was treated with molar distalization using a modified C-palatal plate and temporary anchorage devices to create sufficient space for retraction. The total treatment duration was 21 months. After treatment, his occlusion and smile esthetics showed significant improvement. The modified C-palatal plate represents a treatment modality that enhances the prospects of non-extraction treatment and reduces the need for extraction.

• The korean journal of orthodontics
• /
• v.4 no.1
• /
• pp.21-29
• /
• 1974

The purpose of the present study is to evaluate changes of the soft tissue relative to underlying skeletal elements during orthodontic treatment, and the influence of orthodontic treatment quantitatively on various regions of the facial profile. 59 Korean young women were selected, whose Hellman dental age was IV A, IV C and V A. Lateral cephalometric head films were taken before and after orthodontic treatment. From tracings, landmarks on skeletal and soft tissue profile were located, and then their linear and angular measurements were made directly. The results were obtained as follow: 1) Soft tissues of the facial profile were closely related and dependent on the underlying dentoskeletal frameworks. Orthodontic treament resulted in the reduction of dentofacial protrusion with both upper and lower lips becoming less procumbent during treament. 2) Thickness of the upper lip increased considerably during orthodontic treatment, and this change was related to maxillary incisor retraction. The ratio between the amount of maxillary incisor retraction and that of increment of upper lip thickness was approximately 5:3. 3) Soft tissue thickness overlying Downs' point A, point B and pogonion was not modified by orthodontic treatment. 4) Holdaway's H line, relating facial profile to the underlying dentoskeletal framework, seemed to be the most practical approach to soft tissue analysis.

• The korean journal of orthodontics
• /
• v.29 no.4 s.75
• /
• pp.399-409
• /
• 1999

The purpose of this study was to evaluate the change of soft tissue profile on lower face following retraction of incisors through orthodontic treatment. 31 Korean women with bialveolar protrusion who were treated with 4 first bicuspid extraction were selected. All of samples were treated from above 17 years of age. Lateral cephalometric head films taken before and after treatment were analyzed statistically. The results were obtained as follows. $\cdot$The ratio of upper incisor retraction to upper lip retraction and lower incisor retraction to lower lip retraction were 1.54:1 (r=0.746) and 0.92:1 (r=0.584) respectively $\cdot$It appeared during orthodontic treatment that UIS-LS was increased considerably and the others in soft tissue thickness measurements were slightly decresed. $\cdot$Analysis of correlation showed that the change of the upper lip (LS) with the change of maxillary central incisor (UIS) and the change of lower lip with the change of B point were most strongly correlated. $\cdot$The multiple regression equations were obtained to predict soft tissue profile change of lower face according to retraction of incisors.

• The korean journal of orthodontics
• /
• v.27 no.2
• /
• pp.209-219
• /
• 1997

This investigation was designed to analyze the degree of dental compensation according to horizontal components of craniofacial skeleton and to investigate correlation between dental compensation and craniofacial pattern in skeletal class III malocclusion. The material selected for this study consisted of standard lateral cephalogram of 59 subjects in normal occlusion group, 91 subjects in mild skeletal class III malocclusion group and 58 subjects in severe skeletal class III malocclusion group. The mild skeletal class III malocclusion group was divided into two groups, one was class III malocclusion without anterior crossbite group and the other was class III malocclusion with anterior crossbite group. The data were analyzed by Quick-ceph image program. The results were as follows. 1. Mild skeletal class III malocclusion without anterior crossbite group showed the most labial inclination of upper incisors, followed by severe skeletal class III malocclusion group and mild skeletal class III malocclusion with anterior crossbite group, the Latter showing the least. The amount of lingual inclination of lower incisors was the largest in severe skeletal class III malocclusion group, and there was no statistically significant difference between mild skeletal claw III malocclusion without anterior crossbite group and mild skeletal class III malocclusion with anterior crossbite group. 2. There were little differences in vertical skeletal structure between mild skeletal class III malocclusion without anterior crossbite group and mild skeletal class III malocclusion with anterior cwssbite group, they showed statistically significant differences in the upper incisors measurements. 3. The measurements of lower incisors in mild skeletal class III malocclusion without anterior crossbite group and upper incisors in mild skeletal class III malocclusion with anterior crossbite group represented a high correlation with skeletal structure. Especially, ∠IMPA and ∠FMIA of lower incisor measurements, and ∠U1-FH ∠U1-SN of upper incisor measurements showed high correlation with skeletal structure in each group. 4. ∠IMPA and ∠FMIA of lower incisor measurements showed high correlation with skeletal structure in all groups. ∠U1-FH, ∠U1-SN and U1-facial plane(mm) of upper incisor measurements represented higher correlation with skeletal structure than any other upper incisor measurements.

• The korean journal of orthodontics
• /
• v.52 no.1
• /
• pp.42-52
• /
• 2022

Objective: This study compared soft tissue changes after extraction of the four premolars followed by maximum retraction of the anterior teeth according to the type of anterior teeth movement: tipping and translation. Methods: Patients who had undergone orthodontic treatment involving the extraction of four premolars were retrospectively selected and divided into either the tipping (n = 27) or translation (n = 26) groups based on the retraction of the incisor root apex and the axis changes of the incisors during the treatment period. Lateral pre- and post-treatment cephalograms were analyzed. Results: There were no significant differences between the tipping and translation groups before treatment. The retraction amounts of the root apex of the upper and lower incisors in the tipping group were 0.33 and 0.26 mm, respectively, and 5.02 and 5.31 mm, respectively, in the translation group (p < 0.001). The posterior movements of soft tissue points A and B in the tipping group were 0.61 and 1.25 mm, respectively, and 1.10 and 3.25 mm, respectively, in the translation group (p < 0.01). The mentolabial sulcus angle increased by 5.89° in the tipping group, whereas it decreased by 8.13° in the translation group (p < 0.001). Conclusions: An increased amount of retraction of the incisor root apex led to the increased posterior movement of soft tissue points A and B, and this appeared more distinct in cases involving the lower incisor and lower lip.

• The korean journal of orthodontics
• /
• v.13 no.1
• /
• pp.15-30
• /
• 1983

This study was to investigate the effect of functional pressures of the tongue and lips on the incisor relationship. The incisor relationship was devided into two categories; one is vertical relationship which is subdevided into open bite, normal overbite and deep bite on the basis of overbite, and the other is anteroposterior relationship which is subdevided into cross bite, normal overjet and large overjet on the basis of overjet. The functional tongue and lip pressures exerted to incisors were measured with subminiature pressure sense from the 99 subjects, 19 of normal overbite and overjet, 26 of open bite, 18 of deep bite, 17 of cross bite and 19 of large overjet with age of 17-20, and cephalograms were taken from the same subjects. Functional pressures were analyzed and correlated to craniofacial veriables. The results of present investigation led to the following conclusions. 1. There were no differences in functional and maximum pressures by the tongue and lips exerted to maxillary incisors between normal occlusion, open bite, deep bite, cross bite and large overjet. 2. Significant differences in functional and maximum pressures by the tongue and lips exerted to mandibular incisors have been shown to exist between open bite and deep bite, but no differences between cross bite and large overjet. 3. Equilibrium between tongue pressures and lip pressures did not exist. 4. Significant differences in the ratio of upper functional and maximum pressures to lower pressures of the tongue and lips exerted to upper and lower incisors have been shown to exist between open bite and deep bite, and no differences between cross bite and large overjet. 5, There was significant correlation between functional and maximum pressures exerted to mandibular incisors and craniofacial variables, but not significant correlation between functional and maximum pressures exerted to maxillary incisors and craniofacial variables.

• The korean journal of orthodontics
• /
• v.44 no.2
• /
• pp.77-87
• /
• 2014

Objectives: This study was designed to define the Korean norm values for the Ricketts analysis. Methods: In this longitudinal study, lateral cephalograms of 31 subjects with normal occlusion were taken biennially from ages 9-19 years. Cephalometric measurements were performed. Parameters for which the 10-year change did not exceed one standard deviation were defined as unchanged. The means and standard deviations for the measured parameters were determined for each age group. Results: No significant changes in growth were observed in the molar relationship, incisor overjet, incisor overbite, mandibular incisor extrusion, interincisor angle, lower incisor tip (B1) to A point-Pogonion (A-PO) plane, upper incisor tip (A1) to A-PO plane, B1 inclination to A-PO, A1 inclination to A-PO, B1 inclination to Frankfurt plane (FH), convexity, lower facial height, facial axis, maxillary depth, maxillary height, palatal plane to FH, cranial deflection, ramus Xi position, or porion location. Continual changes over the 10 years of growth were observed in the maxillary first molar distal position to pterygoid true vertical plane, facial depth, mandibular plane to FH, anterior cranial length, mandibular arc, and corpus length. Conclusions: Clinicians can apply the Korean norms at age 9 as determined in this study when using the Ricketts analysis. The patient's age at the beginning of treatment and their sex should be taken into consideration when drawing visual treatment objectives.

• The korean journal of orthodontics
• /
• v.32 no.5 s.94
• /
• pp.313-325
• /
• 2002

Three-dimensional CT imaging is efficient in examining specific structures in the craniofacial area by reproducing actual measurements through minimization of errors from patient movement and image magnification. Due to the rapid development of digital image technology and the expansion of treatment range a need for developing three -dimensional analysis has become urgent. Therefore the purpose of this study was to evaluate the percentage of error and magnification of three-dimensional CT using a dried skull and Vworks $program^{TM}$ (Cybermed Inc., Seoul, Korea) and also to obtain landmarks that are easy to designate and reproduce in three-dimensional images using the Vmorph-proto $program^{TM}$ (Cybermed Inc., Seoul, Korea). The following conclusions were obtained, 1. In the comparison of actual measurements from the dried skull and the three-dimensional image obtained from the Vworks program, the mean error was 0.99mm and the magnification was 1.04%. 2. Clinically useful hard tissue landmarks from three-dimensional images were Supraorbitale, Lateral orbital margin, Infraorbitale, Nasion, ANS, A point, Zygomaticomaxilla, Upper incisor, Lower incisor, B point, pogonion, Menton, PNS, Condylar inner margin, Condylar outer margin, Porion, Condylion, Gonionl, Gonion2, Gonion3, Sigmoid notch and Basion. 3. Clinically useful soft tissue landmarks from three-dimensional images were Endocanthion, Exocanthion, Soft tissue Nasion, Pronasale, Alare lateralis, Upper nostril point, Lower nostril point, Subnasale, Upper lip point, Cheilion, Stomion, Lower lip center, Soft tissue B, Pogonion, Menton and Preaurale. The Vworks program can be considered a clinically efficient tool to produce and measure three-dimensional images. Most of the hard and soft tissue landmarks proposed above are anatomically important points which are also easily reproducible and designated. These landmarks can be beneficial in three-dimensional diagnosis and the prediction of changes before and after surgery.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.4
• /
• pp.394-402
• /
• 2017

Purpose: The purpose of this study is to evaluate the displacement of artificial tooth of monolithic complete denture manufactured by milling and 3D printing method in which the denture base and the artificial teeth are simultaneously made. Materials and methods: Twelve upper and lower complete dentures for each were made by milling and 3D printing method. Group Up and Group Lp are a group of upper and lower dentures made by printing, and Group Um and Group Lm are denture groups made by milling. Group Uc and Group Lc are is a group of finally designed upper and lower dentures respectively. Measurements were performed between both central incisors (AB, ab), both canines (CD, cd), both first molars (EF, ef), between an incisor and a first molar (AE, ae), and between incisor and lingual point (AG, ag) for each upper and lower denture. Results: AG and ag value between printed dentures and original ones as well as between milled dentures and original ones showed a statistically significant difference (One-way ANOVA, P<.05) in both lower and upper monolithic dentures. In the lower monolithic ones, ab, cd and ef value revealed a significant difference between Group Lp and Group Lm (One-way ANOVA, P<.05). Conclusion: Dentures made using milling or 3D printers revealed statistically significant difference compared with those of original data. However, it showed clinically very accurate reproducibility.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.2
• /
• pp.259-271
• /
• 1992

This study was designed to investigate the criteria of the perfect smile that was necessary to improve the esthetic problem in oral and maxillo-facial region and treating the anterior tooth region. The author took the facial straight photograph of 240 university students(male : 129, female : 111) in a resting and a smiling position, measured and analized the lip pattern and the relation between the lip and the teeth when they were smiling. Besides, 10 members of committee for appraisal (dentist : 5 persons, professor of the college of fine arts : 5 persons) estimated the smiling pattern. After that the author have compared and analyzed the obtained results. The results obtained were as follows : 1. In the shape of the upper lip, when the upper lip curved downward, it was 42.92% , straight was 45.00% and curved upward was 12.08%. The group in which the upper lip curved upward was the most esthetic. 2. In the relation between the upper lip and the teeth, high smile was 29.17%, average smile was 55.83% and low smile was 15.00%. The group of average smile was the most esthetic. 3. In the parallel relation between the lower lip and maxillary anterior incisal curvature, the group of paralled was 60.42%, the group of straight was 34.17% and the group of reverse was 5.41%. The group of parallel was the most esthetic. 4. In the relationship between maxillary anterior incisor and lower lip, the group of the maxillary anterior incisor were slightly covered by the lower lip was 10.42%, the group of the maxillary anterior teeth touched to the lower lip was 35.83%, and the no-touching was 53.75%. The group of the maxillary anterior teeth touched to the lower lip was the most esthetic. 5. In the teeth displayed in a smile, displayed to the canine was 0.84%, displayed to the first premolar was 19.17%, displayed to the second premolar was 57.92%, displayed to the first molar was 20.00% and displayed to the second molar was 2.08%. The group of displayed to the first molar was the most esthetic. 6. At smiles, the width of the mouth corner was 0.46 times of the full face width, 0.95 times of the interpupillary distance, and 1.23 times of the resting position. 7. At smiles, the lengh of the upper lip was 0.71 times and lower lip was 0.93 times of the length in the resting position.