• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.477-483
• /
• 2016

In this paper, we propose a distributed user scheduling with interference-aware power control (IAPC) to maximize signal to generating interference plus noise ratio (SGINR) in uplink multi-cell networks. Assuming that the channel reciprocity time-division duplexing (TDD) system is used, the channel state information (CSI) can be obtained at each user from pilot signals from other BSs. In the proposed scheduling, to be specific, each user reduces the transmit power if its generating interference to other BSs is larger than a predetermined threshold. Each BS selects the user with the largest SGINR among users. Simulation results show that the proposed technique significantly outperforms the existing user scheduling algorithms. It is worth noting that the proposed technique operates with distributed manner without information exchange among cells. Hence, it can be easily applied to the practical wireless systems like 3GPP LTE without significant modifications of the specification.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1A
• /
• pp.37-52
• /
• 2004

In this paper, Multistage Adaptive Partial PIC eliminating effectively the multiple access and multipath interference for DS-CDMA based W-CDMA uplink system is designed and its performance is evaluated with computer simulation. By adaptively controlling the slope of the soft limiter with received signals, the efficiency of the soft limiter can be maximized and the better performance is obtained by solving error floor problem using further precise generation of interference signal. As a result, The proposed Multistage Adaptive Partial PIC with simple optimizing method for time-variant channel showed optimum performance at fewer stages. Besides fewer stages, the interference cancellation at the output of the rake receiver considerably reduced system complexity. The Multistage Adaptive Partial PIC with precise generation and efficient cancellation of interference signal can solve error eoor problem, resulted from initial false detection and improve system performance of high data rate system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11A
• /
• pp.1146-1153
• /
• 2007

In this paper, we analyze the I/Q imbalances effects at the WiBro uplimk when using direct-conversion RF transceiver. If I/Q imbalance exists, the transmit signal is spread over two sbcarriers. As a result, phenomenon of performance reducing is produced. Contrary to OFDM system in which one user uses all subcarrier, symmetrical two subcarriers are assigned other users in OFDMA system. I/Q imbalances elements can't be estimated such a conventional allocation method of tiles in subchannel and compensated. In order to solve the problem, We propose a new method in order that symmetrical two subcarriers are assigned one user. If novel method is applied, we can estimate I/Q imbalances and compensate distortion received signal. As a result, we can obtain a performance similar performance when I/Q imbalances is not existed. Also, if proper detection methods are used, we get the effect of performance improvement, because of diversity gain what is happened due to combining I/Q imbalances with multi path fading channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4A
• /
• pp.291-301
• /
• 2009

In this paper, the effect of ISI(Inter-Symbol Interference) and ICI(Inter-Carrier Interference) due to time difference of arrival on OFDMA-based mobile multi-hop relay (MMR) systems is analyzed. Analyses are performed for the ISI caused by the previous OFDMA symbol transmitted from neighboring macro or relay cell as well as the ISI caused by the next OFDMA symbol transmitted from neighboring macro or relay cell. Then, an effective SINR(Signal to Interference plus Noise Ratio) estimation method and a path selection method considering time difference of arrival are proposed to minimize the effect of ISI and ICI. It is shown by simulation that the performance degradation caused by time difference of arrival can be significantly mitigated when the proposed path selection method is applied to the uplink of OFDMA-based MMR systems.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.1
• /
• pp.9-14
• /
• 2003

APON, the subscriber network using bus or tree topology, requires MAC protocol, because it shares the uplink channel for many subscribers to transmit data to OLT. Although various MAC schemes, which consider each QoS characteristics of traffic are proposed considering transmission characteristics of ATM traffic class, existing schemes reduce the network efficiency by increasing transmission overhead in frame. In this paper, we propose new MAC scheme, which shows similar performance as those of existing schemes but does not increase transmission overhead. To prevent increasing transmission overhead, the proposed scheme encodes the information about each cell information of traffic of the local queue in RAU transmitted periodically from ONU to OLT Thus, the proposed MAC scheme shows similar performance as those of existing ones and increases efficiency of entire network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1728-1735
• /
• 2011

In this paper, satellite data link waveform is proposed which is based on the waveform of Link-16 but LDPC code is studied instead of CCSK code in order to be optimized to satellite nonlinear channel environment and transmission characteristics. And the DSM (Demux, Selective CH switch, and Mux) transponder structure is suggested which can remove all of the jamming signal out of the transmission signal band and convert uplink hopping frequency to desired ones of downlink. The results of BER and anti-jamming performance analysis shows that the required Eb/No and processing gain in the worst case partial band jammer of the proposed waveform are 2.5dB and 52dB respectively and the anti-jamming capacity improvement of DSM transponder is maximum 2dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1647-1658
• /
• 2011

This paper suggests the methods to improve the wireless backhaul link of the Relay FDD mode that 3GPP LTE-Advanced supports. New RRC message and Relay startsup procedure are introduced to apply Carrier Aggregation in the Relay wireless backhaul. Also, we design new reference signal that makes Type 1 Relay operated in full-duplexing, expecting to maximize the radio resource utilization. And, we propose the efficient configuration for the periodic uplink control information under the backhaul subframe allocation method in LTE-Advanced Relay. Hereafter, the standard activities in the 3GPP RAN is supposed to focus on the improvement of the LTE-Advanced features. Therefore, the suggestions in this paper are expected to be actively discussed in the LTE-Advanced future releases.

• Journal of electromagnetic engineering and science
• /
• v.14 no.4
• /
• pp.393-398
• /
• 2014

A highly efficient dual-mode linear CMOS stacked-FET power amplifier (PA) is implemented for 3G UMTS and 4G LTE handset applications. High efficiency is achieved at a backed-off output power ($P_{out}$) below 12 dBm by employing an active-bypass amplifier, which consumes very low quiescent current and has high load-impedance. The output paths between high- and low-power modes of the PA are effectively isolated by using a bypass switch, thus no RF performance degradation occurs at high-power mode operation. The fabricated 900 MHz CMOS PA using a silicon-on-insulator (SOI) CMOS process operates with an idle current of 5.5 mA and shows power-added efficiency (PAE) of 20.5%/43.5% at $P_{out}$ = 12.4 / 28.2 dBm while maintaining an adjacent channel leakage ratio (ACLR) better than -39 dBc, using the 3GPP uplink W-CDMA signal. The PA also exhibits PAE of 35.1% and $ACLR_{E-UTRA}$ of -33 dBc at $P_{out}$ = 26.5 dBm, using the 20 MHz bandwidth 16-QAM LTE signal.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.6
• /
• pp.600-607
• /
• 2008

Reliable wireless transmission of data generated by the flight critical subsystems or mission equipments of the unmanned aerial system is critical for mission success. As the UAS system becomes more sophisticated, its dependency on a reliable high rate radio communication system also increases. This requirement is applied not only during the operation phase but also in the early development test phase. This paper introduces a practical cost-effective communication system for a UAS. The downlink module combines analog NTSC video signal with onboard data, and send them using 2.4 GHz carrier wave. The uplink system has less a severe requirement on the bandwidth, and thus uses 430 MHz signal. This paper also presents a sample packet structure which can be adopted for many UAS of similar class.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2576-2583
• /
• 2015

In a full-duplex (FD) wireless cellular network, uplink (UL) users induce the severe inter-user interference to downlink (DL) users. Therefore, a user scheduling that makes a pair of DL user and UL user to use the same radio resource simultaneously influences the system performances significantly. In this paper, we first formulate an optimization problem for user scheduling to minimize the occurrence of outage, aiming to guarantee the quality of service of users, and then we propose a suboptimal user scheduling algorithm with low complexity. The proposed scheduling algorithm is designed in a way where the DL user with a worse signal quality has a higher priority to choose its UL user that causes less interference. Simulation results show that the FD system using the proposed user scheduling algorithm achieves the optimal performance and significantly decreases the outage probability compared with the conventional half-duplex cellular system.