• 한국지반공학회지:지반
• /
• 제3권3호
• /
• pp.31-48
• /
• 1987

지중에 매설된 관에는 관위의 흙무게나 지표면상재하중으로 인하여 연직견력이 작용하며, 지진이나 불등침하등으로 인하여 상향하중이 작용하는 경우도 있다. 본 연구에서는 Marston-Spangler이론을 새로운 방법으로 분석하여 관위의 흙무게로 인해 매설권에 작용하는 압력에 관하여 검토하였고, 매설연성관에 대한 재하실험을 실시하여 지표면상재하중으 로 인한 매설관의 거동특성을 연구하였다. 또 매설관의 인발저항(uplifting resistance)이론의 검토와 상향인발실험을 통하여 최대인발저항을 구하는 방법 등을 연구하였다.

• 한국안전학회지
• /
• 제16권2호
• /
• pp.97-102
• /
• 2001

Anchors are often used in construction of foundations such as transmission towers to resist uplifting forces. When plate anchors are embedded in soft clay, they may undergo a deformation under the pressure of sustained load. In soft saturated clays, the suction force can be a large par of the ultimate uplift capacity. This study is to present recent laboratory model test results conducted to evaluate the nature of variation of the suction force for plate anchors with shear strength and embedment ratio. The ratio of F$_{s}$Q$_{n}$ versus H/D in bentonite decreases with the increase of the embedment ratio.o.o.

• International Journal of Automotive Technology
• /
• 제6권3호
• /
• pp.221-227
• /
• 2005

Aim of this study is to investigate an aerodynamic effect of a drag-reducing device on a heavy-duty truck. The vehicle experiences two different kinds of aerodynamic forces such as drag and uplifting force (or downward force) as it is traveling straight forward at constant speed. The drag force on a vehicle may cause an increase of the rate of fuel consumption and driving instability. The rolling resistance of the vehicle may be increased as result of the negative uplifting or downward force on the vehicle. A device named roof-fairing system has been applied to examine the reduction of aerodynamic drag force on a heavy-duty truck. As for a engineering design information, the drag-reducing system should be studied theoretically and experimentally for the best efficiency of the device. Four different types of roof-fairing model were considered in this study to investigate the aerodynamic effect on a model truck. The drag and downward force generated by vehicle has been obtained from numerical calculation conducted in this study. The forces produced on four fairing models considered in this study has been compared each other to evaluate the best fairing model in terms of aerodynamic performance. The result shows that the roof-fairing mounted truck has bigger negative uplifting or downward force than that of non-mounted truck in all speed ranges, and drag force on roof-fairing mounted truck has smaller than that of non-mounted truck. The drag coefficient $(C_D)$ of the roof-fairing mounted truck (Model-3) is reduced up to $41.3\%$ than that of non-mounted trucks (Model-1). A downward force generated by a roof-fairing mounted on a truck is linearly proportional to the rolling resistance force. Therefore, the negative lifting force on a heavy-duty truck is another important factor in aerodynamic design parameter and should be considered in the design of a drag-reducing device of a tractor-trailer. According to the numerical result obtained from present study, the drag force produced by the model-3 has the smallest of all in all speed ranges and has reasonable downward force. The smaller drag force on model-3 with 2/3h in height may results of smallest thickness of boundary layer generated on the topside of the container and the lowest intensity of turbulent kinetic energy occurs at the rear side of the container.

• 한국콘텐츠학회논문지
• /
• 제15권3호
• /
• pp.78-87
• /
• 2015

최근 경찰공무원의 청렴성에 관한 우려의 목소리가 언론매체를 통해 끊임없이 회자되고 있으며, 이는 경찰조직 전체에 대한 신뢰를 저하시키는 요인으로 작용된다고 할 수 있다. 경찰공무원은 여타 직군에 비해 국민에게 법적 강제력을 행사함으로 인해 높은 수준의 청렴성과 도덕성을 요구하고, 경찰청에서는 청렴성 제고를 위한 다양한 정책을 시행하고 있으나 부정부패가 근절되지 못하는 현실에 처해있다. 이러한 시점에서 본 연구는 경찰부패와 청렴도 제고에 관련되는 국내 외의 선행연구 및 통계자료를 활용하여 청렴도 제고를 위한 시사점을 도출하도록 하였다. 경찰공무원의 청렴도 제고를 위한 제도적 장치의 문제점으로 내부고발을 통한 감찰시스템의 운영을 지적하고 경찰공무원을 잠재적 범죄자로 바라보는 인식 또한 문제점으로 지적하였다. 이와 더불어 경찰공무원 징계시 징계양형의 기준제시가 명확하지 않으며, 조직충성도를 제고하기 위한 징계경험자에 대한 배려가 이루어지지 않 는다는 점 등을 문제점으로 제시하였다. 이를 토대로 청렴성 제고를 위한 대국민 신뢰를 회복하기 위한 정책적 제언을 제시토록 하였다. 그 내용으로는 부패행위의 유형별 분류를 명확히 제시하여 경찰공무원에게 경종을 울릴 필요가 있으며, 적발위주의 감찰제도를 탈피하기 위해 미국 및 호주경찰의 조기경보체계시스템(EWS : early waring system)도입을 통해 문제경찰관을 조기에 발견하여 보다 큰 과오를 저지르지 않도록 방지장치를 마련하는 제도에 대한 검토의 필요성을 피력하였고, 신규채용과정에서 청렴성 검증을 강화하도록 해야 할 것이다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.225-232
• /
• 1999

Construction case of PRD (Percussion Rotary Drill) pipe pile and matters to be attended in construction of PRD pile were reviewed. The compressive and uplifting static pile load tests for PRD piles were performed and, also, analysis by Pile Driving Analyzer was done. Based on these results, bearing components in each resisting part (that is: steel toe, external skin, and internal skin) were measured separately. The measured resisting force was compared to the value calculated by the estimated formula. The pile capacity was mobilized in steel toe area and the external skin friction and the internal friction were not produced. Thus, it could be considered that toe of PRD pile should be supported in hard bearing stratum (for example, the fresh soft rock).

• Structural Engineering and Mechanics
• /
• 제40권1호
• /
• pp.29-48
• /
• 2011

Under large storm loads sections of a long pipeline on the seabed can be uplifted. Numerically this loss of contact is extremely difficult to simulate, but accounting for uplift and any subsequent recontact behaviour is a critical component in pipeline on-bottom stability analysis. A simple method numerically accounting for this uplift and reattachment, while utilising efficient force-resultant models, is provided in this paper. While force-resultant models use a plasticity framework to directly relate the resultant forces on a segment of pipe to the corresponding displacement, their historical development has concentrated on precisely modelling increasing capacity with penetration. In this paper, the emphasis is placed on the description of loss of penetration during uplifting, modelled by 'strain-softening' of the force-resultant yield surface. The proposed method employs uplift and reattachment criteria to determine the pipe uplift and recontact. The pipe node is allowed to become free, and therefore, the resistance to the applied hydrodynamic loads to be redistributed along the pipeline. Without these criteria, a localised failure will be produced and the numerical program will terminate due to singular stiffness matrix. The proposed approach is verified with geotechnical centrifuge results. To further demonstrate the practicability of the proposed method, a computational example of a 1245 m long pipeline subjected to a large storm in conditions typical of offshore North-West Australia is discussed.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.307-311
• /
• 2007

In the case of the railway bridges, uplift forces were occurred at the edge of the segments when vehicular loads were applied. These forces made the compressive and tensile forces occur in the fastening system. Therefore, the structural analysis was performed to investigate the safety of fastening system which was modeled as one directional spring element. In this case, the stiffness of the spring element was obtained from experimental study which was conducted by compressive load. For that reason, to perform rational and exact structural analysis, the translational stiffness of the fastening system obtained from the experimental study applied the tensile load and the rotational stiffness should be considered because it was occurred the tensile force as well as the compressive force in fastening system. In this study, an elastic and inelastic experimental study was performed for six specimens. The translational stiffness along the vertical axis of rail and the rotational stiffness along the strong axis of rail were investigated. Also structural behavior of the fastening system was analyzed.

• 대한토목학회논문집
• /
• 제33권4호
• /
• pp.1303-1313
• /
• 2013

본 연구에서는 콘크리트 슬래브 궤도를 가지는 교량의 사용성 검토에 있어 단위 축하중, 단위 수직 단차, 단위 회전에 의해 발생되는 레일 지지점의 작용력에 대한 기준 값을 구하였다. 해석방법에 있어서는 레일이 탄성 스프링에 의해 연속적으로 지지되는 모델과 이산적으로 지지되는 모델이 이용되었다. 해석결과 얻어진 레일 지지점에서의 작용력은 콘크리트 궤도의 사용성 검토에서 참조되고 있는 DS 804 기준에 제시된 값과 비교되였으며, 그 결과는 잘 일치하였다. 또한, 레일 지지점의 간격과 체결장치의 강성이 레일 지지점에서의 작용력에 미치는 영향을 분석하였다.

• 한국지반공학회논문집
• /
• 제21권10호
• /
• pp.123-131
• /
• 2005

본 연구에서는 양압력을 받는 기초구조물의 보강공법으로 앵커를 시공할 경우, 이에 대한 파괴메카니즘 및 안정해석법의 개발에 기초적인 자료를 제공하기 위해 나선형 앵커에 대한 실내인발시험 및 유한요소해석을 수행하였다. 실내인발시험은 강우시 지하수위 상승으로 인해 기초구조물에 양압력이 작용하는 경우를 고려하기 위해 포화사질토 내에서의 하중-변위특성을 분석한 후, 이를 건조시의 경우 등에 대해 유한요소 해석결과와 비교${\cdot}$분석하였으며, 앵커의 극한인발저항력에 미치는 영향인자 및 앵커의 인발에 따른 거동특성 등을 평가하였다. 또한, 군형태 앵커의 설치간격을 변화시켜가면서 하중-인발변위 특성을 비교한 후, 나선형 앵커의 무리효과에 의한 간섭영향 요인을 분석하였다.

• Smart Structures and Systems
• /
• 제26권2호
• /
• pp.195-211
• /
• 2020

Among anti-seismic technologies, base isolation is a very effective means of mitigating damage to structural and nonstructural components, such as equipment. However, most seismic isolation systems are designed for mitigating only horizontal seismic responses because the realization of a vertical isolation system (VIS) is difficult. The difficulty is primarily due to conflicting isolation stiffness demands in the static and dynamic states for a VIS, which requires sufficient rigidity to support the self-weight of the isolated object in the static state, but sufficient flexibility to lengthen the isolation period and uncouple the ground motion in the dynamic state. To overcome this problem, a semi-active VIS, called the piezoelectric inertia-type vertical isolation system (PIVIS), is proposed in this study. PIVIS is composed of a piezoelectric friction damper (PFD) and a leverage mechanism with a counterweight. The counterweight provides an uplifting force in the static state and an extra inertial force in the dynamic state; therefore, the effective vertical stiffness of PIVIS is higher in the static state and lower in the dynamic state. The PFD provides a controllable friction force for PIVIS to further prevent its excessive displacement. For experimental verification, a shaking table test was conducted on a prototype PIVIS controlled by a simple controller. The experimental results well agree with the theoretical results. To further investigate the isolation performance of PIVIS, the seismic responses of PIVIS were simulated numerically by considering 14 vertical ground motions with different characteristics. The responses of PIVIS were compared with those of a traditional VIS and a passive system (PIVIS without control). The numerical results demonstrate that compared with the traditional and passive systems, PIVIS can effectively suppress isolation displacement in all kinds of earthquake with various peak ground accelerations and frequency content while maintaining its isolation efficiency. The proposed system is particularly effective for near-fault earthquakes with long-period components, for which it prevents resonant-like motion.