• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.4
• /
• pp.101-106
• /
• 2009

The unsafe act and unsafe condition is due to human error that experience 80% of safety accidents. Accordingly, one of the most important issues to reduce industrial accidents as a whole, is how to reduce the accident rate by the human error. Therefore, this paper describes the development of quantitative risk assessment (QRA) model by ergonomics for reform of safety consciousness on the semiconductor industry. Unconsciousness, disregard, ignorance, recklessness, and stress among the human factors are selected for conscious reform. Finally, the QRA model is efficiently expected to contribute towards improving continuous self-safety and health and safety culture campaign in order to prevent industrial accidents.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.4
• /
• pp.161-169
• /
• 2017

The Human Factors Analysis and Classification System (HFACS) is a general human error framework originally developed and tested within the U.S. military as a tool for investigating and analyzing the human causes of aviation accidents. Based upon Reason's (1990) model of latent and active failures, HFACS addresses human error at all levels of the system, including the condition of aircrew and organizational factors. As a result, this study aims to examine the influence between the latent conditions based on HFACS. This study seeks to verify the factors of "Organizational Influence" effecting the "Precondition for Unsafe Acts" of HFACS. The results of empirical analysis demonstrated that the organizational influence had a positive influence on precondition for unsafe act, especially the "Organizational Climate" of organizational influence had even greater influence on precondition for unsafe acts.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.04a
• /
• pp.35-41
• /
• 2012

The unsafe act and unsafe condition is induced by the fundamental cause factors of industrial accidents. In this paper, stress is classified into job, life and workplace stress. Therefore, the purpose of this paper is to develop a Korean stress model focused on the unmarried workers in order to prevent fundamental industrial accidents. The results of this paper are followed. First, the oriental culture and idea in Korea is directly connected to the central axis of all life. Accordingly, concrete and systematic safety management methods should be proposed from the point of Korean culture. Finally, the industrial accident questionnaire needs an item that reports the mental and physical condition of workers in order to prevent occupational diseases.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.192-193
• /
• 2015

The number of accidents is raising every year and severity is also increasing. A lot of studies are interested in the leading indicator such as safety culture or safety audit to reduce accidents. In particular, the studies on safety awareness are actively conducted. However, these studies showed that there was consciousness of scapegoatism which to pass responsibility of accident causes to others regardless of safety awareness. It means that there are probability about overestimating and making light of unsafe condition and act which have to manage and control. Eventually, the direct causes which lead to the fatal accident may be consistently arisen. Nevertheless, researches about consciousness of scapegoatism are shortage. Therefore, this study proposed the means to investigate the relationship between consciousness of scapegoatism and accidents through report from KOSHA and conducts the survey with suggested means. This paper will contribute to prevent accidents by identifying relationship between consciousness of scapegoatism and accidents.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.4
• /
• pp.1-8
• /
• 2009

The studies on semiconductor industrial accident in korea have been focused on the frequencies of each type of safety management employee, characteristics, cause and unsafe conditions, acts and so on. Those attributes of semiconductor industrial accidents were usually analyzed independently, so that it was hard to provides a wel-developed process and systematic guidelines for efficient safety management. Therefore, there were a few studies based on comprehensive survey in terms of the shape type of safe management. The questionnaire survey carried out for the 284 workers who were responsible for safety management in center with cooperation companies in semiconductor industry factor analysis showed that there were three factors of safety management. First, investment and operation and management for accident prevention, Second, unsafe act and condition, safety management Third, general human error and behavior. The industries of respondents were correlative with three groups. Three groups showed statistically significant differences on the number of cases. Actually, the group with the larger investment and the more unsafe cause, human error of accidents prevention had a smaller causes of accident cases.

• Journal of the Korean Society of Safety
• /
• v.5 no.3
• /
• pp.56-62
• /
• 1990

This study is conducted to analyze exact causes of occupational fatalities and results are as follows ： 1) The number of fatalities in establislment which employed less than 50 workers is 605(40.1％ ). Age of sixties and seventies is occupied by 10 percent with there being old-aged trend. Fatal workers who were employed less than 3 months are 39.5 percent and fatal workers who were employed more than 10 years are 11.9 percent. Safety training is necessary for newly recruited and long employed workers. 2) Accident type is, in sequence, fall from elevation, traffic accident, disease, contact with electric current, and hazardous condition is, in order, inadequate guard, hazardous method or procedure, public hazard, and agency of accident is, in sequence, temporary structure/building/structure, powered transport vehicle, passenger vehicle, hoisting or lifting apparatus, and unsafe act is, in order, driving error, failure to secure or warn. 3) The results of cross-tabulation for hazardous condition and accident type is, in sequence, traffic accident by public hazard, fall from elevation by hazardous method or procedure, fall from elevation as well as contact with elctric current by inadequate guard. The result of cross-tabulation for agency of accident and accident type is, in order, fall from elevation by temporary structure/building/structure, traffic accident of passenger vehicle and powered transport vehicle, contact with electric apparatus. The result of cross-tabulation for agency of accident and hazardous condition is, in sequence, public hazard of passenger vehicle, hazardous method or procedure of temporary structure/building/structure, publit hazard of powered transport vehicle, inadequate guard of temporary structure/building/structure. The result of cross-tabulation for unsafe act and accident type is, in sequence, traffic accident by driving error, fall from elevation by inattention to footing or surrounding, contact with electric current by secure or warn.

• Journal of the Korean Society of Safety
• /
• v.39 no.1
• /
• pp.104-113
• /
• 2024

Unlike in general manufacturing process, safety management in laboratory-based research area is complicated because the latter generally involves trying untested methods or handling unusual substances in small amounts. Laboratory accidents in South Korea have recently shown an increasing trend. Unfortunately, statistics on such accidents are not officially published by any domestic public agencies. In this study, multivariate analysis was performed on the relationships between variables to develop effective strategies for preventing laboratory accidents. A Cross-Tabulation Analysis of accident-related factors in 179 accident cases revealed that the laboratory type, accident type, and unsafe-act type are all statistically significant, whereas the unsafe condition and management factors differ with the statistical criteria. Furthermore, the results of a Multiple-Correspondence Analysis showed that accidents can be divided largely into three groups having different accident causes and injury types; this confirms the necessity of different strategies to prevent accidents of each type. The findings also reveal differences between the distribution of accident types mentioned in the accident case collection books and actual reported cases. This suggests that an official statistical system administered by a public institution would be necessary for effective prevention of laboratory accidents.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.6
• /
• pp.55-64
• /
• 2018

In spite of many previous studies conducted to prevent safety accidents at construction sites, the frequency of safety accidents has not decreased. And recently, a lot of research has been done to analyze the causes of the accidents resulting from the personal characteristics and behaviors of managers or workers, and eliminate them. However, despite these efforts, safety accidents occur consistently as managers and workers shift their responsibilities for the safety accidents onto someone other than themselves. Therefore, in order to prevent safety accidents, this study investigated the consciousness of shifting responsibility among managers and workers and analyzed the correlation between factors influencing the consciousness of shifting responsibility. In addition, it proposed the quantitative levels of the consciousness of shifting responsibility based on the survey of managers and workers. The results of this study demonstrated that managers tend to the shift responsibility onto workers, whereas workers the shift responsibility onto managers. It was additionally demonstrated that there is a correlation between the consciousness of shifting responsibility and the factors influencing it. The findings of this study are expected to improve the safety awareness among managers and workers and make contributions in the theoretical and practical aspects of construction safety management.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.167-174
• /
• 1997

Engineers must be aware of possible sources of chaotic behavior. They may render conventional design predictions untrustworthy and potentially unsafe because of the sensitivity to initial conditions. Dynamic responses of a spherical shell subjected to impulsive loading which act on the center are analyzed using the finite element method. The chaotic responses are identified by the standard methods, such as displacement-time histories, Poincare maps, and phase diagrams. The responses are chaotic, but, not so sensitive to the initial conditions, and the characteristics of responses are not changed with time, in contrast to the case of the responses of beam. The Poincare points scattered in the limited area represent that the responses are chaotic, but do not show the geometric structures. The snap-through phenomena of the shell to the side of the direction of the load or of the opposite direction, is analysed by using the energy diagram.