• International Journal of Aeronautical and Space Sciences
• /
• v.11 no.4
• /
• pp.313-318
• /
• 2010

The power plant system of a tilt rotor unmanned aerial vehicle (UAV) was verified by the Ironbird ground test, which considerably reduces cost and risk during the developmental stages. The function and performance of the engine, drive line, nacelle conversion, and rotor systems were evaluated using a building block test approach. The Ironbird test concept facilitates the discovery of potential faults in earlier stages of the testing period. As a result, the developmental testing period could effectively be shortened. The measured test data acquired through a ground control and data acquisition system exhibited satisfactory results which meet the developmental specifications of a tilt rotor UAV.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.7
• /
• pp.617-624
• /
• 2010

This article describes the system architecture of KUVE (KIST Unmanned Vehicle Electric) and unmanned autonomous navigation of it in KIST. KUVE, which is an electric light-duty vehicle, is equipped with two laser range finders, a vision camera, a differential GPS system, an inertial measurement unit, odometers, and control computers for autonomous navigation. KUVE estimates and tracks the boundary of road such as curb and line using a laser range finder and a vision camera. It follows predetermined trajectory if there is no detectable boundary of road using the DGPS, IMU, and odometers. KUVE has over 80% of success rate of autonomous navigation in KIST.

• Journal of Advanced Research in Ocean Engineering
• /
• v.2 no.4
• /
• pp.192-201
• /
• 2016

This study examined a PD controller and its application to automatic berthing control of an unmanned surface vehicle (USV). First, a nonlinear mathematical model was established for the maneuvering of the USV in the presence of environmental forces. A PD control algorithm was then applied to control the rudder and propeller during an automatic berthing process. The algorithm consisted of two parts, namely the forward velocity control and heading angle control. The control algorithm was designed based on longitudinal and yaw dynamic models of the USV. The desired heading angle was obtained using the "line of sight" method. Finally, computer simulations of automatic USV berthing were performed to verify the proposed controller subjected to the influence of disturbance forces. The results of the simulation revealed a good performance of the developed berthing control system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.605-607
• /
• 2022

As the industry using unmanned vehicles expands, scenarios in which multiple unmanned vehicles are applied to various fields are attracting attention. One unmanned vehicle has limitations in operating time and range, and by using multiple unmanned vehicles, it has the advantage of providing services in a much wider range and shortening the operating time. Taking advantage of these advantages, recent attempts are being made to apply a number of unmanned mobile vehicles to fields such as disasters and broadcasting beyond military use. In this paper, we present a scenario for a data interworking system that can send and receive data from a distance based on a network using multiple unmanned vehicles.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.5
• /
• pp.522-526
• /
• 2015

Generally, underwater unmanned vehicle have adopted an inertial navigation system (INS), dead reckoning (DR), acoustic navigation and geophysical navigation techniques as the navigation method because GPS does not work in deep underwater environment. Even if the tactical inertial sensor can provide very detail measurement during long operation time, it is not suitable to use the tactical inertial sensor for small size and low cost UUV because the tactical inertial sensor is expensive and large. One alternative to INS is attitude heading reference system (AHRS) with the micro-machined electro mechanical system (MEMS) inertial sensor because of MEMS inertial sensor's small size and low power requirement. A cost effective and small size attitude heading reference system (AHRS) which incorporates measurements from 3-axis micro-machined electro mechanical system (MEMS) gyroscopes, accelerometers, and 3-axis magnetometers has been developed to provide a complete attitude solution for UUV. The AHRS based MEMS overcome many problems that have inhibited the adoption of inertial system for small UUV such as cost, size and power consumption. Several evaluation experiments were carried out for the validation of the developed AHRS's function and these experiments results are presented. Experiments results prove the fact that the developed MEMS AHRS satisfied the required specification.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.12
• /
• pp.1691-1697
• /
• 2018

There has been a steady study of unmanned vehicle. So far, continuous research has brought news of the commercialization of unmanned vehicle. In addition, it has been applied in a variety of fields with another industry. A lot of research has been done, too, to apply inert driving indoors. Using LoRa network, which is a network dedicated to IoT, unmanned vehicle control system that is applied to LoRa network from a small space, or from an office hospital to a factory, is installed to increase efficiency when the performs special tasks. This paper presents solutions to a variety of problems by using LoRa network, which is dedicated to IoT, to recognize an unmanned vehicle as a single object, to communicate with surrounding objects, and to receive information necessary for driving indoors from a cloud server.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.126-142
• /
• 2023

The purpose of this study is to develop unmanned traffic enforcement equipment and standard specifications for the prevention of traffic accidents and violations of the two-wheeled vehicle laws. To this end, we conducted a review of the problems and new technologies of the currently operating unmanned traffic enforcement equipment on two-wheeled vehicles. And through a survey, the feasibility of introducing unmanned traffic enforcement equipment for two-wheeled vehicles and the current status of technology were investigated. In addition, the two-wheeled vehicle enforcement function was implemented through field tests of the development equipment, and the addition of enforcement targets and the number recognition rate were improved through performance improvement. Based on the results of field experiments and performance evaluation, performance standards for unmanned two-wheeled vehicle traffic enforcement equipment were prepared, and in the communication protocol, two-wheeled vehicle-related matters were newly composed in the vehicle classification code and violation items to develop standards.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.4
• /
• pp.358-368
• /
• 2015

Recently, unmanned systems are largely utilized in various fields due to the persistency and the least operational risk and an unmanned surface vehicle(USV) is the one of the representative application in the naval field. To assign multiple roles to an USV, we developed a sonar system which consists of a forward detecting sonar for the long-range detection, a downward detecting sonar for the small target scan and identification, and a strut type body for mounting sonar systems. In this paper, we described the developed sonar system for USV and the sea test results for verifying system performance. The test results showed that the developed sonar system was able to detect the underwater target about several kilometers away and could recognize a small object at the downside of the sonar system. We expect that the developed sonar system will be easily applied to other unmanned platforms without serious consideration.

• Journal of Advanced Navigation Technology
• /
• v.8 no.2
• /
• pp.105-111
• /
• 2004

This paper describes the design of navigation system for an unmanned target drone which is operated by Korean army as for anti-air gun shooting training. Current target drone is operated by pilot control of on-board servo motor via remote control system. Automatic flight control system for the target drone greatly reduces work load of ground pilot and can increase application area of the drone. Most UAVs being operated nowdays use high-priced sensors as AHRS and IMU to measure the attitude, but those are costly. This paper introduces the development of low-cost automatic flight control system with low-cost sensors. The integrated automatic flight control system has been developed by integrating combining power module, switching module, monitoring module and RC receiver as an one module. The performance of navigation for low cost unmanned aerial vehicle, unmanned target drone as our test bed in this paper is verified by both Hardware in the loop simulation(HILS) to test performance of GPS as GPS output frequency high and results of flight test.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.32 no.1
• /
• pp.1-9
• /
• 2024

The unmanned aerial vehicle industry has developed a lot, but the possibility of accidents is increasing due to potential risks. In this study, SHELL models and HFACS were used to analyze unmanned aerial vehicle accidents in the UK and to identify the main causes and characteristics of accidents. The main cause analyzed by the SHELL model was identified as an abnormality in the alarm system. The main cause of the accident analyzed by HFACS was identified as the technical environment. The common cause identified by the SHELL model and HFACS was identified as a mechanical problem of unmanned aerial vehicles. This is due to the lack of accurate information or functionality of the alarm system in the operator interface, which often prevents the operator from responding to sensitive information. Therefore, in order to prevent civil UAV accidents, the stability and reliability of the system must be secured through regular inspections of the UAV system and continuous software updates. In addition, an ergonomic approach considering human interfaces is needed when developing technologies.