• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.6
• /
• pp.505-513
• /
• 2021

We propose an autonomous mission management software design and verification technique for unmanned aerial vehicles to autonomously mitigate dynamic situation changes occurred in the inside and outside of an aircraft in compliance with the mitigation priority order. The proposed autonomous mission management software is designed in a modular architecture that consists of concurrently executing multiple threads. To verify it, we suggest three verification steps: 1) software integration by checking the expected request/response messages between the threads for all possible dynamic situation changes; 2) integration test to verify the software functionality; 3) performance test to verify the quantitative software performance. Especially, the software integration test environment is built and utilized to carry out the integration and performance tests.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.36 no.2
• /
• pp.79-86
• /
• 2020

In order to accommodate the increase in urban population due to government-led national planning and economic growth, many buildings such as houses and business building were supplied. Although the building law was revised and managed to manage the supplied buildings, for the sake of economic benefit, there have been buildings that are enlarged or reconstructed without declaring building permits. In order to manage these buildings, on-site surveys were conducted. but it has many personnel consumption. To solve this problem, a method of using a satellite image and a manned aircraft is utilized, but it is diseconomical and a renewal cycle is long. In addition, it is not utilized to the height, and although it is judged by the shading of the building, it has limitations that it must be calculated individually. In this study, height of the building was calculated by using the unmanned aerial vehicle with low personnel consumption, and the accuracy was verified by comparison with the building register and measured value. In this study, spatial information was constructed using a fast unmanned aerial vehicle with low manpower consumption and the building height was calculated based on this. The accuracy by comparing the calculated building height with the building register and the actual measurement.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.1
• /
• pp.63-73
• /
• 2021

This paper presents a algorithm for automatic target recognition robust to the influence of the flame in order to track the target by EOTS(Electro-Optical Targeting System) equipped on UAV(Unmanned Aerial Vehicle) when there is aerial target or marine target with flame at the same time. The proposed method converts infrared images of targets and flames into a gradient vector field, and applies each gradient magnitude to a polynomial curve fitting technique to extract polynomial coefficients, and learns them in a shallow neural network model to automatically recognize targets and flames. The performance of the proposed technique was confirmed by utilizing the various infrared image database of the target and flame. Using this algorithm, it can be applied to areas where collision avoidance, forest fire detection, automatic detection and recognition of targets in the air and sea during automatic flight of unmanned aircraft.

• Journal of Aerospace System Engineering
• /
• v.17 no.5
• /
• pp.34-41
• /
• 2023

This paper applies the icing effect and wing rock uncertainty to small unmanned aerial vehicles (UAVs), which have recently attracted attention. Attitude control simulations were performed using various control methods. First, the selected platform, the Skywalker X8 UAV with blended wing-body (BWB) configuration, was linearized for both its baseline form, and a form with applied icing effects. Subsequently, using MATLAB SimulinkⓇ, simulations were conducted for roll and pitch attitude control of the baseline configuration and the configuration with icing effects, employing disturbance observer-based PID control, model reference adaptive control, and model predictive control. Furthermore, the study introduced wing rock uncertainty simultaneously with icing effects on the configured model-a combination not previously explored in existing research-and conducted simulations. The performance of each control Method was compared and analyzed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.1
• /
• pp.10-19
• /
• 2014

Nozzle configurations and atmospheric conditions play a significant role in the infrared signature level of aircraft propulsion system. Various convergent nozzles of an unmanned aircraft under different atmospheric conditions are considered. An analysis of thermal flow field and nozzle surface temperature distribution is conducted using a compressible CFD code. It is shown that the IR level in rear direction is considerably reduced in deformed nozzles, whereas the IR level in adjacent azimuth angles is increased in aspect ratios around 6 due to the plume spreading effect caused by high aspect ratio of nozzles. In addition, an analysis of atmospheric transmissivity for various seasons and observation distance is conducted using the LOWTRAN 7 code and subsequently plume IR signature is calculated by considering atmospheric effects. It is shown that the IR signature is reduced significantly in summer season and near the band of carbon dioxide in case of relatively close distance.

• The Korean Journal of Air & Space Law and Policy
• /
• v.28 no.2
• /
• pp.37-61
• /
• 2013

In modern international law, the absence of legal definition regarding drone(Unmanned Aerial Vehicle) has made legal scholars work on an typical analogy between aircraft codified in the international document and drone. The wording of the Convention on International Civil Aviation is limited to two categories of aircraft, such as civil aircraft and state aircraft, whereas military aircraft is not legally defined. As such it is, the current practices of the State regarding the drone flight over foreign territory have proven a hypothese that drone is being deemed as military aircraft. Principal usage of drone lies in reconnaissance and surveillance mission as well as so-called targeted killing, which is prohibited if the killing is treacherous. Claimed war against terrorism, however, is providing a legal rationale that targeted killing is not treacherous, and that the targeted person is not civilian but combatant. In such context, armed attack of drone is deemed legal and justified. Consequently, such attack is legal in the general context of the war. The rules that govern targeting do not turn on the type of weapon system used, and there is no prohibition under the laws of war on the use of technologically advanced weapons systems in armed conflict so long as they are employed in conformity with applicable laws of war. Drones may present interesting new challenges because of their sophistication and the technological advantage they convey to their operators.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.1
• /
• pp.61-69
• /
• 2013

In an evaluation process of aircraft flying qualities, a clear and concise application interface is important since an evaluation process requires numerous repeated evaluation. This flight evaluation program have implemented efficient flight evaluation user interface along with changed trim condition interface and composed of comprehensive evaluation interface have mounted all automated FQ evaluation modules that was selected to be compose of 14 items in respect of an unmanned fixed-wing aircraft. Accordingly when it is necessary to design the flight control system as well as to develop a FQ considered aircraft, this S/W can be utilized as a tool that is a useful test evaluation S/W with scalability and enable to reduce the time and the cost of verification and evaluation process.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.6
• /
• pp.458-464
• /
• 2013

This paper presents an algorithm for autonomous landing approach of a unmanned aerial vehicle. The main purpose of the autonomous landing approach in this study is to help a safe landing at night. From any initial position of the aircraft when this function is engaged, a flight path command is generated from the initial position. The shortest combination of an initial circular arc, a straight line segment, and a final circular arc is chosen for the flight path that will lead the aircraft to one end of runway for a landing. The algorithm is initially validated through numerous simulations with various initial conditions of aircraft. Then it is successfully validated through a number of flight tests.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.1
• /
• pp.1-7
• /
• 2015

In the case of an unmanned aerial vehicle (UAV) equipped with a GNSS sensor, a boundary line where the vehicle can actually exist can be calculated using a navigation error model, and safe navigation (e.g., precise landing and collision prevention) can be supported based on this boundary line. Therefore, for the safe operation of UAV, a model for the position error of UAV needs to be established in advance. In this study, the multipath error of a GNSS sensor installed at UAV was modeled through a flight test, and this was analyzed and compared with the error model of an existing manned aircraft. The flight test was conducted based on a scenario in which UAV performs hovering at an altitude of 40 m, and it was found that the multipath error value was well bound by the error model of an existing manned aircraft. This result indicates that the error model of an existing manned aircraft can be used in operation environments similar to the scenario for the flight test. Also, in this study, a scenario for the operation of multiple UAVs was considered, and the correlation between the multipath errors of the UAVs was analyzed. The result of the analysis showed that the correlation between the multipath errors of the UAVs was not large, indicating that the multipath errors of the UAVs cannot be canceled out.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.3
• /
• pp.59-65
• /
• 2009

Recently, UAV(unmanned aerial vehicle) has evolved into various figure and become miniaturized. On using existing design method, it is hard to make modelling and standardizing design of flight control system of the figure including cylinder like pipe. These problems are caused by uncorrect express of nonlinearity in controller design. Therefore, it is developed through step of correct modelling and simulation on real time sing high efficiency computer in aircraft development of various figure. This is reducing period and expense of aircraft development. For the shake of solving these problems, in-design method has been devised by H.M. Wang. In this paper, an object of control is cylindrical UAV instead of the general figure of aircraft. It was analyzed flight condition, specification about level flight of the UAV and was presented algorithm to find control value.