• Restorative Dentistry and Endodontics
• /
• 제4권1호
• /
• pp.29-34
• /
• 1978

The purpose of this study was to measure penetration of dye stuff(5% Methylene blue, Hematoxylin, Crystal violet and Safranin-O) on silicate cement, Adaptic, Hi-pol and unfilled resin. Each filling material was mixed on the mixing pad and the mixed material was inserted with condensation force of 500gr, 1000gr and 2000gr and without condensation force into preformed glass tube (10mm in diameter and 10mm in height). The specimen was stored in the air for 24 hours, then specimen was immersed in various dye solution (5% methylene blue, hematoxin, crystal violet and safranin-O) for different period of time (l hour and 24 hours). These dye-treated specimen was cut horizontally at the middle portion and the dye penetration in cut surface was measured. Following results were obtained. 1. Pentration of various dye was excessive in silicate cement with and without Condensation force. 2. There has been no evidence of dye penetration in unfilled resin. 3. Dye penetration occurced with in 1 hour period and the extending time didn't affect the dye penetration.

• 전기학회논문지
• /
• 제65권7호
• /
• pp.1218-1224
• /
• 2016

This paper presents the results of a study on the effect of surface modified alumina nanocomposites on electrical tree growth in epoxy insulation. Treeing experiments were conducted at a fixde AC voltage (500kV/mm, 10kV/60Hz)on unfilled epoxy sample as well as epoxy nanocomposites of 4 types with different loading and surface modified GDE gram. Time for tree growth as well as tree propagation length were studied. The results show that there is a significant improvement tree propagation time compare unfilled epoxy to epoxy nano alumina composites. Different tree propagation shapes as well as slower tree growth with 4 types nano alumina composites were observed.

• 대한소아치과학회지
• /
• 제28권3호
• /
• pp.522-529
• /
• 2001

본 실험은 소아치과에서 널리 이용하고 있는 우식예방법인 불소도포가 치면열구전색재와 법랑질과의 결합에 미치는 영향을 알아보는 것이다. 1, 2, 3, 4군은 unfilled sealant인 Teethmate A(Kuraray, Japan)를, 5, 6, 7, 8군은 filled sealant인 Ultraseal XT(Ultradent, U.S.A.)를 이용하였고 1군과 5군은 불소로 전처리를 하지 않았으며 2군과 6군은 1.23% APF인 60 second taste(Pascal Company, U.S.A.)로 전처리하고 3군과 7군은 2.0% NaF인 Swirl(Biomedica Concepts, U.S.A.)로 전처리하였으며 4군과 8군은 불소를 함유한 세마재인 Nupro(Johnson & Johnson Consumer Product Inc., U.S.A.)로 치면세마를 시행하였다. 준비된 시편은 산부식한 후 직경 3mm, 높이 2mm의 몰드를 이용하여 30초간 전색재의 중합을 시행하였고 열순환 후 전단강도를 측정하였다. unfilled sealant의 경우 각 군간에 유의한 차이가 없었지만 filled sealant의 경우 5군과 8군에 비해 6군과 7군은 유의하게 낮은 결합강도를 나타내었다(p<0.05).

• Restorative Dentistry and Endodontics
• /
• 제27권1호
• /
• pp.77-86
• /
• 2002

Current composites are made with dimethacrylate monomers and silane-treated silica microfillers, either alone or with silane treated glass fillers The main reasons for clinical failure of dental composites are secondary caries, wear and fracture. Most of practitioner want to get a composite which is more tougher under occlusal stress, less polymerization contraction, and better handling properties in application clinically. The aim of this study was to investigate the influence of resin matrix with various flows on the physical proper-ties such as fracture toughness and degree of conversion of the experimental resins. It was hypothesized that flexible or tough resin composites can be designed by judicious choice of monomer composition Various flow resin matrices containing Bis-GMA, UDMA, and TEG-DMA were made by altering the pro-portion of the monomers. After the unfilled resins were light-cured for different light intensity, the fracture toughness(K$_{1c}$) was measured according to ASTM standard using the single edge notched geometry, and degree of conversion(DC) was measured by FTIR. And experimental composites were formulated with variations in the proportion of silanated quartz and strontium glass fillers as 60, 75, and 77wt%. Also, the physical properties of composites with various filer contents were evaluated as same manner. All resulting data were compared by ANOVA/Tukeys test at 0.05 level. The results were as follows; 1. The degree of conversion of high flow resin containing less Bis-GMA was higher than that of low flow unfilled resin 2. While the degree of conversion of unfilled resin was increased according to light intensity for polymerization, there was no significant increase with moderate and high light intensity. Also, the fracture toughness was not increased by high light intensity. 3. The fracture toughness was high in the low flow unfilled resin containing higher contents of Bis-GMA. 4. There was a significant increase for fracture toughness and a tendency for degree of conversion to be reduced when the content of fillers was increased. 5. In the experimental composites, the flow of resin matrix did not affected on the fracture toughness, even, which was decreased as increase of viscosity. These results showed that the physical properties of a dental composite could be attributed to the flow of resin matrix with relative content of monomers. Specific combination of resin monomers should be designed to fulfil the needs of specific indication for use.

• 한국인터넷방송통신학회논문지
• /
• 제18권6호
• /
• pp.69-74
• /
• 2018

본 논문에서는 그물망 접지를 갖는 MCAA(Microstrip Comb Array Antenna)에서 그물망 구조의 변화가 MCAA에 미치는 영향을 조사하였다. 우선, 24GHz ISM 밴드에서 MCAA를 설계한 후 접지의 그물망 구조를 변화시키며 MCAA의 이득과 SLL(Side Lobe Level)의 변화를 조사하였다. 이 조사를 위해 그물망의 크기와 그물망 면적에 대한 도체를 제외한 공백의 면적 비인 공백율의 두 변수를 변화시켰다. MCAA는 방사체가 플랫한 MCAA와 방사체가 테이퍼된 MCAA의 두 가지 구조로 조사하였다. 공백율이 증가함에 따라 플랫한 MCAA와 테이퍼된 MCAA 모두에서 이득이 감소했다. 한편, 그물망 크기의 증가는 공백율 증가보다 안테나 이득을 더욱 극적으로 감소시켰다. 이러한 경향은 안테나 SLL에 대해서도 유사했으나 테이퍼된 MCAA가 플랫한 MCAA보다 그물망 크기 변화에 대한 영향을 좀 더 심하게 받았다.

• 대한치과보철학회지
• /
• 제24권1호
• /
• pp.33-43
• /
• 1986

The purpose of this study was to compare the wear resistance of heat pressure-cured microcomposite(SR-Isosit-N), photo-cured microcomposite(Dentalcolor), unfilled heat-cured resin(Thermojel) and that of human enmel. Specimens were made with specially designed die and finally polished with #3,000 diamond paste. After 100,000 strokes of tooth brushing at electric tooth-brushing machine, mean thickness loss of each specimen was measured by using surface profile and integration. The results were as follows 1. Mean thickness loss were $84.3{\pm}27.3{\mu}m$ in unfiled heat-cured resin, $9.4{\pm}2.5{\mu}m$ in photocured microcomposite, $7.6{\pm}2.1{\mu}m$ in heat.pressure-cured microcomposite and $0.97{\pm}0.42{\mu}m$ in enamel. 2. Heat.pressure-cured microcomposite and photo-cured microcomposite had no difference in mean thickness loss(p>0.05). 3. Unfilled resin and microcomposite had much differences in mean thickness loss (p<0.005). 4. ha resins used in this experiment had too much mean thickness loss as compared with enamel (p<0.005).

• Advances in Computational Design
• /
• 제1권2호
• /
• pp.139-154
• /
• 2016

The usage of sandwich structure is extensively increasing in lightweight protective structures due to its low density and other useful properties. Sandwich panels made of metal sheets with unfilled cellular cores are found to exhibit lower deflections by comparing to an equivalent monolithic plate of same metal and similar mass per unit density. However, the process of localized impact on solid structures involving plastic deformation, high strain rates, temperature effect, material erosion, etc. does not hold effectively as that of monolithic plate. In present work, the applications of the sandwich plate with corrugated core have been extended to develop optimized lightweight armour using foam as medium of its core by explicit finite element analysis (FEA). The mechanisms of hardened steel projectile penetration of aluminum corrugated sandwich panels filled with foams have been numerically investigated by finite element analysis (FEA). A comparative study is done for the triangular corrugated sandwich plate filled with polymeric foam and metallic foam with different densities in order to achieve the optimum penetration resistance to ballistic impact. Corrugated sandwich plates filled with metallic foams are found to be superior when compared to the polymeric one. The optimized results are then compared with that of equivalent solid and unfilled cores structure to observe the effectiveness of foam-filled corrugated sandwich plate which provides an effective resistance to ballistic response. The novel structure can be the alternative to solid aluminum plate in the applications of light weight protection system.

• Elastomers and Composites
• /
• 제48권3호
• /
• pp.181-189
• /
• 2013

비충전, 카본블랙 충전, 그리고 실리카 충전 천연고무(NR) 복합체를 원형 변형 상태로 $60-90^{\circ}C$에서 노화시켜 회복 거동을 조사하였다. 시험편은 공기와 물을 매일 교대로 교체하는 교매질 시스템 하에서 노화시켰다. 충전시스템에 따른 회복률의 순서는 비보강 > 실리카 보강 > 카본블랙 보강 순이었다. 공기에서 물로 교체하는 교매질 시스템에서 노화된 시험편의 회복률이 물에서 공기로 교체하는 교매질 시스템에서 노화된 시험편의 회복률보다 더 컸다. 최초 노화 매질은 변형 정도에 지배적으로 영향을 끼쳤다.

• Restorative Dentistry and Endodontics
• /
• 제17권1호
• /
• pp.153-165
• /
• 1992

Dental composite resin is a kind of the particle - reinforced composite material, and is widely used in recent dental restoration of anterior and posterior tooth region. The purpose of this study was to investigate the fracture behaviour according to volume fractions and external findings of the filler particles for better interpretation of the fracture characteristics of posterior dental composite resins by analytic method of fracture mechanics. The plane strain fracture toughness($K_{IC}$) and Acoustic Emission were determined with three - point bending test using the single edge notch specimen according to the ASTM - E399, and its analyzed data was compared with filler volume fractions derived from the standard ashing test and scanning electron fractographs of each specimen including the unfilled experimental resin as a control. The results were that the value of fracture toughness of the composite resin material was in the range from 0.85 MPa$\sqrt{m}$ to 1.60 MPa$\sqrt{m}$ and was higher than the value of the unfilled experimental resin, and the fracture behaviours dervied from Acoustic Emission analysis show prominent differences according to the volume fraction and the size of filler particles used in each composite resin. The degree of resistance against crack propagation seems to be increase and the fractographs demonstrate the high degree of surface roughness and irregularity according with the increase of fracture toughness value.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권4호
• /
• pp.293-300
• /
• 2011

Purpose: Substance P is a well known neurotransmitter and has been known to mediate pain. Recently, it has been unveiled that substance P is involved in the recruitment of mesenchymal stem cells to wound sites. The purpose of this study was to exam bone formation when a combination of substance P and silk fibroin was used in a bone defect model. Methods: Twenty rabbits were used and 40 calvarial defects were formed. They were divided as 4 groups (unfilled control, silk only, silk+$10{\mu}g$/ml substance P; Sub10, and silk+$100{\mu}g$/ml substance P; Sub100). All animals were humanely sacrificed 4 or 8 weeks after grafting. The specimens were analyzed by micro-computerized tomography and histological analysis. Results: When compared to the unfilled control to silk only group, there was significant difference in bone mineral density (BMD) and the attenuation coefficient (AC) at 4 weeks ($p$=0.037 and 0.038, respectively). When compared Sub10 group to Sub100 group, there was significant difference in BMD and AC at 8 weeks ($p$=0.004 for all). Residual graft amounts were $52.1{\pm}15.8$%, $15.2{\pm}9.2$% and $9.0{\pm}3.3$% for silk only, Sub10, and Sub100 groups, respectively. When comparing the residual graft amount of silk only to sub10 or sub100, the differences were statistically significant ($p$ <0.001). Conclusion: The silk fibroin scaffold showed higher BMD and AC than the unfilled control. The combination graft with substance P and silk fibroin scaffold showed a faster graft degradation than with a silk fibroin scaffold only.