• 제목/요약/키워드: Unit method

검색결과 7,017건 처리시간 0.037초

자동차 CO2 배출가스 배출단위 변환방법 고찰 (A Study on the Conversion Method of CO2 Emission Unit of Automobiles)

  • 한정옥;김형태
    • 한국가스학회지
    • /
    • 제23권2호
    • /
    • pp.68-73
    • /
    • 2019
  • 본 연구에서는 차대동력계 시험에서 수집한 자동차 배출가스자료를 엔진동력계에서 측정되는 동력계 단위로 변환하는 방법을 제안하였다. 엔진동력계 시험은 소요시간이 길고 비용이 높아 적용이 제한적일 경우 간편한 방법인 차대동력계 시험이 선호될 수 있다. 환산 방법은 거리기준 배출가스 자료에 모드 엔진효율을 고려하여 동력단위로 환산하는 방법이며 CO2 성분에 대해서 적용한 결과 환산 결과와 측정 결과 사이에 우수한 상관성을 확인하였다. 이 방법을 해외자료에 적용할 경우 CO2 배출성능에 대해 0.1% 이내로 일치함을 보였으나 CO, NOx 및 THC 와 같은 미량 배출성분 들은 같은 환산방법을 적용하기에는 상관성이 다소 떨어지며 추가적인 고려가 필요함을 보였다.

적외선 영상의 탐지 정보를 이용한 표적 geolocation 기법 (Target Geolocation Method Using Target Detection in Infrared Images)

  • 김재협;정준호;서정재;이종민;문영식
    • 한국컴퓨터정보학회논문지
    • /
    • 제20권3호
    • /
    • pp.57-67
    • /
    • 2015
  • 본 논문에서는 적외선 영상에서 탐지된 표적의 픽셀정보를 이용하여 실제 환경에서의 표적의 위치를 추정하는 geolocation 기법에 대하여 제안한다. 제안하는 기법은 지대지 전장 환경에서 공중 정찰을 통한 적대 표적의 위치를 파악하는 시스템에 적용이 가능하다. 적대 표적의 geolocation에 영향을 주는 요소는, 시스템의 광학적 왜곡, 지형적 왜곡, 정찰 모듈의 GPS(Global Positioning System) 및 IMU(Inertial Measurement Unit) 왜곡을 들 수 있다. 본 논문에서는 광학적 왜곡과 지형적 왜곡에 적응적인 geolocation 을 위하여 광학 정보의 다항식 최적화와 지구 곡률을 고려한 시선거리 계산 기법을 적용하였으며, 3차원 모의 환경에서 실험한 결과 시스템 요구사항 내에서 geolocation의 정확도를 만족함을 확인하였다.

중학교 가정과 학습지도의 형태에 따른 학습성과에 관한 연구 -식생활 단원을 중심으로- (A Study on the Levell of Learning Achievement by Teaching Method on the Subject of Home Economics in the Middle School)

  • 손희숙;황임섭
    • 한국가정과교육학회지
    • /
    • 제2권1호
    • /
    • pp.101-110
    • /
    • 1990
  • The purpose of this study is to survey the learner’s need achievement, interest and practical level of the learning objectives according to the teacher’s teaching method in home economics of middle school(Dietary Life Unit), to examine the differences according to the local situation, and to get some information to improve the teaching method. This study surveyed the eight units of dietary life with 459 students in the rural community (224 students) and Seoul(235 Students). The collected data were analyzed by T-test, F-test. To sum up this study are as follows: 1. When the need, achievement, interest and practical level of unit “food”are compared the students of seoul with those of rural community, the student of Seoul show high in “The use of Processed Foodstuffs” and low in “Cooking the Processed Foodstuffs.”The student of rural community show in “A kind of Cooking Method”and low in “Environment and Food Life”. 2. The need, achievement, interest, practical level of the whole unit in rural community is higher than those is Seoul. 3. According to teaching method, comparison Seoul with rural community is revealed as follows. Seoul region is revealed significance to discovery learning in “Cooking Foodstuffs(The achievement and interest level) and ”Environment and Food Life”(interest level). Rural community is revealed significance to discussion learning in “The constituent and Food Life”(The need level, interest level). Rural community is revealed significance to explanation learning in “Environment and Food Life”(The achievement level).

  • PDF

원통연삭가공시 반도체 레이저 빔을 이용한 금속표면거칠기의 인프로세스 측정 (A Study on the In-process Measurement of Metallic Surface roughness in Cylindrical Grinding by Diode Laser)

  • 김희남
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 1995년도 춘계학술대회 논문집
    • /
    • pp.1-8
    • /
    • 1995
  • This paper proposed a simple method for measuring surface roughness of ground surface. utilizing non-contact in-process measuring system using the diode laser. The measurement system is consisted of a laser unit with a diode laser and a cylindrical lens a detecting unit with polygon mirror and CCD array sensor. and a signal processing unit with a computer and device. During operation, this measuring system can provide information on surface roughness in the measuring distance with a single sampling and simultanilusly monitor the state of the grind wheel. The experimental results, showed that the increase of the feed rate and the dressing speed an caused increase in the surface roughness and when the surface roughness is 4Rmax-10Rmax, the cutting speed is 1653m/min-1665m/min. the feed rate is 0.2m/min-0.9m/min, the dressing speed is 0.2mm/rev-0.4mm/rev, the stylus method and the in-process method can be obtained the same results. thus under limited working conditions. using the proposed system. the surface roughness of the ground surface during cylindrical grinding can be obtained through the in-process measurement method using the diode laser.

  • PDF

주의집중 기반의 합성곱 양방향 게이트 순환 유닛을 이용한 코골이 소리 검출 방식 (Snoring sound detection method using attention-based convolutional bidirectional gated recurrent unit)

  • 김민수;이기용;김형국
    • 한국음향학회지
    • /
    • 제40권2호
    • /
    • pp.155-160
    • /
    • 2021
  • 본 논문은 수면 무호흡 환자의 중요한 증상 중의 하나인 코골이 사운드 자동 검출 방식을 제안한다. 제안된 방식에서는 수면 중 발생하는 소리 신호를 입력받아 소리 발생 구간을 검출하고, 검출된 소리 구간으로부터 변환된 스펙트로그램을 주의집중 기반의 합성곱 양방향 게이트 순환 유닛 기반의 분류기에 적용하였다. 적용된 주의집중 메커니즘은 합성곱 양방향 게이트 순환 유닛 모델을 확장하여 코골이 소리에 대한 차별적 특징 표현을 학습함으로써 코골이 검출 성능을 향상시켰다. 실험 결과는 제안하는 코골이 검출 방식이 기존 방식보다 약 3.1 % ~ 5.5 %의 정확도 향상을 보여준다.

건설폐기물 재활용촉진을 위한 종류별 분류 및 발생원단위 산정 방안 (The method for the classification according to their kinds and the estimation of unit generation rate for promoting recycling of construction and demolition(c&d) debris)

  • 이희선;김동식
    • 한국재난정보학회 논문집
    • /
    • 제4권1호
    • /
    • pp.86-100
    • /
    • 2008
  • It is needed to classify the kinds of construction and demolition(c&d) debris to 6 catagories of waste concrete, waste asphalt concrete, waste wood, scraps, combustible waste and incombustible waste in order to properly do a separate discharge and to estimate unit generation rate in construction site. Also, in this case, the unit treating cost for mixed wastes should be applied with the unit treating cost for combustible waste. The construction standard materials estimation data is used for basic data for estimating unit generation rate. The mixed wastes in this data should be classified to waste wood, combustible waste and incombustible waste, and their ratio is obtained by using the unit generation rate of Asia Pacific Environment and Management Institute and Seoul Metropolitan Development Institute. The waste amounts generated from newly-built construction can be obtained from multiplying the loss rate by the amount of materials used from construction standard estimation data. Also, those from dismantling construction can be obtained by subtracting waste amount generated during newly-built construction from total input amount of materials in newly-built construction. Those in two cases can be used in construction site. It can be used for estimating the amount generated and establishing the treating plan in the case of setting up the policy of waste management and doing the environment impact assessment.

  • PDF

종합병원 혈관조영촬영유니트의 건축계획에 관한 연구 (A Study on the Architectural Planning of the Angiography Unit in General Hospital)

  • 윤우용;채철균
    • 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
    • /
    • 제12권2호
    • /
    • pp.69-77
    • /
    • 2006
  • Angiography means that a check up to know an abnormal condition in all the blood vessels include from the heart, aortae, cerobrovascular and abdonominal artery to hands and feet. Main examples of this are cerebral angiography, abdominal, liver for urinary anomaly, renovascular angiography, and artery and vein in arms and legs. Angiography uses radial rays or angiography equipment for an image output during interventional procedure and compositive diagnosis. The acts which performed in a projection room have changed drastically. In general, it is performed by using equipment which is attached one or two C-arms and the method of inserting catheter in vein after anesthesia. For this reason, some rooms that consist of angiography room units should be planned not only for expensiveness equipment and facilities also to be germ-free. Nowadays, in the angiography unit case, it is placed independently as the central part of many hospitals. It does not belong to the imaging medical department any more as considering raising filming times and the relation between C.C.U.(coronary care unit) and operation unit. This means the acts performed are diversified and well-organized rooms in support of diagnosis are required. However, it is difficult to plan the angiography room unit due to domestic researches and data on this unit are not enough. Therefore, this study aims at bringing up basic issue for architectural planning of the angiography unit in general hospital.

  • PDF

고주파수분센서를 통한 고강도 콘크리트 단위수량 평가에 관한 실험적 연구 (An Experimental Study on the Evaluation of Unit-Water Content of High Strength Concrete by Frequency Domain Reflectometry Sensor )

  • 윤지원;이승엽;유승환;양현민;이한승
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2023년도 가을학술발표대회논문집
    • /
    • pp.173-174
    • /
    • 2023
  • In this study, unit-water content was measured using a frequency domain reflecometry(FDR) sensor that complements the problems of the existing unit-water content measurement method to evaluate the unit-water content affecting the workability, durability, and quality of high strength concrete. The experiment used the unit-water content of high strength concrete as a variable, and the accuracy and probability distribution of the unit-water content measured through deep learning were analyzed for the output value output through the FDR sensor. In the case of the unit-water content predicted by deep learning analysis, a high accuracy and high distribution of more than 93% were found within the error range of ± 10 kg/m3. In the future, research is needed to secure high reliability by utilizing data obtained through experiments with various variables.

  • PDF

교과연계를 위한 학교도서관 단원목록 시스템의 개발에 관한 연구 - 중학교 과학과를 중심으로 - (A Study on the Development of Unit Catalog System for Curriculum Linkage in School Libraries: Focusing on Middle School Science Department)

  • 김보란;김정현
    • 한국비블리아학회지
    • /
    • 제33권4호
    • /
    • pp.27-47
    • /
    • 2022
  • 이 연구의 목적은 교육과정과 연계할 수 있는 교과 단원목록 시스템의 개발에 있다. 연구방법은 먼저 중학교 교육과정과 과학과 전 학년의 교과서 분석을 통해 단원 주제어를 추출하였다. 이를 바탕으로 교과의 단원주제와 관련된 도서를 연결하여 단원 도서목록, 단원주제어를 색인어로 정리한 색인어목록, 그리고 단원주제와 연계된 학년 및 학교급 연계목록을 하부 시스템으로 하는 단원목록 시스템을 설계하였으며, Notion 프로그램을 활용하여 중학교 과학 1단원을 표본으로 웹상에서 단원목록 시스템을 구현하였다. 시스템 평가를 위해 학생들을 대상으로 실험 및 설문 조사를 하였으며, 시스템 만족도 및 추후 활용 의향 등에서 매우 긍정적인 결과를 보였다. 한편 이 연구는 중학교 과학과를 대상으로 한정하였지만 전체 학년 및 교과로 확대 적용할 것을 제안하였다.

ISO 12219-5 (Static chamber법)를 이용한 모듈내 구성부품별 VOCs 영향도 분석 (VOCs impact factor analysis of unit components in Part assembly by ISO 12219-5 method)

  • 이신종;장혜진;곽동환;김만구
    • 분석과학
    • /
    • 제27권6호
    • /
    • pp.284-291
    • /
    • 2014
  • 차량 실내 공기질 대응 프로세스는 두 단계의 시험 방법으로 이루어져 있다. 먼저 모듈 부품평가를 통해 차량 실내 VOCs의 주요 원인을 찾고, 절단 시험편을 이용하여 VOCs가 주로 방출되는 소재를 찾는다. 만약 VOCs가 주로 방출되는 소재를 확인 시, 소재 개선을 통해 차량과 모듈 부품에서 방출되는 VOCs를 줄일 수 있다. 하지만 기존의 절단 시험편을 이용한 시험법은 VOCs 원인을 찾는데는 절단면에서의 방출 문제가 있기 때문에, 구성 부품 단위의 평가방법 적용이 필요하다. ISO 12219-5 시험 방법은 부품 절단없이 평가를 하기 때문에 소재 및 표면적의 영향이 함께 고려되어, 모듈 부품에서 구성 부품의 VOCs 영향도 확인이 가능하였다. 트림과 콘솔의 구성부품 평가를 통해 모듈내의 주요 원인 부품을 확인할 수 있었다. 또한 ISO 12219-5 모듈 부품 시험법과 구성 부품 시험법간의 정량적 상관관계 규명을 통해 품질관리를 위한 관리값을 설정할 수 있었다.