• 한국항만학회지
• /
• 제14권3호
• /
• pp.313-319
• /
• 2000

In this paper, we proposed the model of wireless communication for ACTS using DSRC and the DSRC system for T/C. The proposed wireless communication model is how to join with DSRC and other wireless communication in port. The DSRC system for T/C is the first application to the unit of port Facilities Automation on stacking area. The DSRC system is communicated between OBE and RSE using 5.8Hz ISM band frequency. The previous works of DSRC applications are gate automation. In these cases, the road trackers are difficult to obtain information of the port in the stacking area. So we used the DSRC for the wireless communication for the port Facilities Automation. Using DSRC, the load trackers obtain more information in the port and contacts to ITS on back-roads of port. The proposed communication system is serviced to reelection of port statistics.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.1254-1258
• /
• 2005

Net outflow flux and unit load of pollutants were investigated at a paddy fields area(Soro-ri) with large-scaled plots on loam soil during irrigation seasons of $2001\~2003$. Water samples were collected, and inflow and outflow were .measured at $5\~10$ day intervals during non-storm periods and at $2\~6$ hours intervals during storm events. The average concentration of TP in percolated water was much smaller than that in irrigation and surface outflow water likely due to phosphorus absorption capacity of paddy soils. Net outflow flux in study area was significantly correlated with rainfall and surface outflow discharge. Nutrient flux from Paddy fields can be abated by reduction in outflow surface discharge.

• 한국산업정보학회논문지
• /
• 제18권3호
• /
• pp.35-46
• /
• 2013

국내 전력 수요량 예측을 위한 정확한 분석 모델을 개발하기 위하여 고차원 데이터 군집 분석에 적합한 차원 축소 개념의 부분공간 군집 기법과 SMO 분류 기법을 결합한 전력 수요 패턴 예측 방법을 제안하였다. 전력 수요 패턴 예측은 무선부하감시 데이터 뿐 아니라 소지역 단위의 센서스 정보를 통합하여 시간대별 전력 부하 패턴 분석과 인구통계학 및 지리학적 특성 분석이 가능하다. 서울지역 대상의 센서스 정보 및 전력 부하를 이용한 소지역 전력 수요 패턴 예측 결과 총 18개의 특성 군집을 구성하였으며, 전력 수요 패턴 예측 정확도는 약 85%를 보였다.

• 환경위생공학
• /
• 제22권4호
• /
• pp.87-104
• /
• 2007

The objective of this study is to estimate the load of pollutants caused from the forest area among non-point pollutants within the Juam lake. The surveyed forest area was classified into broad-leaved, conifer, mixed and herbage area by forest tree type. Water quality and flux were investigated under rainfall and non-rainfall, respectively. Then, pollutant loading was evaluated by using the values of unit pollutant loading factor of each point and area of forest zone. Water quality analysis results of runoff by forest tree types were as follows. - Annual BOD, $COD_{Mn}\;and\;COD_{Cr}$ concentration of runoff in conifer area was high, and particle and biological recalcitrant compounds were flowed highly. - SS, T-N and T-P concentration was high in runoff from broad-leaved area, and biological degradable compounds was flowed. - Water quality of water from valley was maintained good under non-rainfall and could be utilized as fresh drinking water. Through water quality standard investigation, a countermeasure establishment was necessary to secure a good quality of drinking water - BOD, $COD_{Mn},\;and\;COD_{Cr}$ concentration of Bo-sung river was higher 1.5 times than other 2 streams, and because of high T-N, and T-P concentration in Songgwang stream, the management for this was necessary.

• 융합정보논문지
• /
• 제9권1호
• /
• pp.54-60
• /
• 2019

최근 기후변화로 인한 외부 열환경이 악화되고 있으며, 이로인한 건축물에너지사용량이 상승하고 있다. 기후변화 대응형 건축물 저에너지 기술 성능평가를 위하여 Energy Plus를 활용하였다. 실험군 유형은 기본건축물(Control)과 기화냉각시스템(EMS)이며, 유형별 분석결과를 비교하였다. 에너지성능평가결과 냉방피크부하는 Control 대비 EMS에서 약 9% 이상 저감률을 보였다. 단위면적당 연간 냉방부하는 Control 대비 EMS에서 약 17% 이상 저감률을 나타내었다. 단위면적당 연간 에너지사용량은 Control 대비 EMS에서 약 10% 이상 저감률을 보였다. 따라서 건축물 에너지저감기술로 기화냉각시스템의 효과는 양호한 것으로 판단되었으며, 향후 기화냉각시스템의 분사량 및 이격거리에 따른 건축물에너지성능평가 연구가 진행되어야 할 것이다.

• Geomechanics and Engineering
• /
• 제2권3호
• /
• pp.177-190
• /
• 2010

This paper presents the details of indigenous development of the piezovibrocone and calibration chamber. The developed cone has a cylindrical friction sleeve of $150cm^2$ surface area, capped with a $60^{\circ}$ apex angle conical tip of $15cm^2$ cross sectional area. It has a hydraulic shaker, coupled to the cone penetrometer with a linear displacement unit. The hydraulic shaker can produce cyclic load in different types of wave forms (sine, Hover sine, triangular, rectangular and external wave) at a range of frequency 1-10 Hz with maximum amplitude of 10 cm. The piezovibrocone can be driven at the standard rate of 2 cm/sec using a loading unit of 10 ton capacity. The calibration chamber is of size $2m{\times}2m{\times}2m$. The sides of the chamber and the top as well as the bottom portions are rigid. It has a provision to apply confining pressure (to a maximum value of $4kg/cm^2$) through the flexible rubber membrane inlined with the side walls of the calibration chamber. The preliminary static as well as dynamic cone penetration tests have been done sand in the calibration chamber. From the experimental results, an attempt has been made to classify the soil based on friction ratio ($f_R$) and the cone tip resistance ($q_c$).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.633-635
• /
• 2007

To cope with increasing power demand in metropolitan area, the power system in Korea has equipped with unit generator of large capacity, high density and uneven distribution, and transmission line of long distance, large capacity and high voltage. As the power system growing up enormous, it has become difficult to maintain the standard voltage in case of radical fluctuation of load or severe change of voltage by power system fault for its weakness of responsive characteristics although the power condenser has been installed to solve the unstability by lack of reactive power. Consequently, we review harmonic wave production and control characteristics to solve unstability problem of voltage in northern metropolitan, to reduce transmission restriction cost and to minimize load shedding by relocation of SVC (Static Var Compensator), which is highly effective for improvement of responsive characteristics for radical voltage fluctuation.

• 한국지리정보학회지
• /
• 제9권2호
• /
• pp.79-90
• /
• 2006

본 연구의 목적은 도시지역에 SWMM 모형에 필요한 적정규모의 배수유역(HSU) 및 관거망 공간정보의 정밀도 수준을 파악하는 데 있다. 공간정밀도 수준의 차이가 지표면 유출유량의 모의결과에 미치는 영향은 매우 미미한 수준에서 억제가 가능하였으나, 오염부하량 유출의 모의결과는 토지이용이 서로 다른 다수의 단위소유역들을 재합성하여 새로운 단위소유역을 작성하면 유출 오염부하량이 감소됨이 확인되었다. 한편, 관거의 공간정밀도 차이에 따른 유출량 모의결과는 유출첨두시간에 약간의 차이를 보이지만 전체 모의 기간을 통하여는 유출 패턴과 총유량에 미치는 영향은 매우 낮았다. 관거 유출과정 중에 다소의 유출부하량 계산의 오차가 발생하였으나, 그 규모는 관거 정밀도가 낮은 Case-3을 제외하고는 약 5~10% 정도였다.

• 한국전산구조공학회논문집
• /
• 제29권6호
• /
• pp.563-569
• /
• 2016

본 논문에서는 철골모멘트골조의 초기 강성과 연성을 동시에 조절하기 위해 기둥-보 휨강도비를 고려한 재분배 기법이 제시된다. 제시되는 기법은 총 구조물량과 기둥-보 휨강도비에 대한 제약조건을 만족시키면서 구조물의 최상층의 변위를 최소화한다. 고려된 설계변수는 구조부재의 단면적을 사용하며, 정식화된 문제로부터 최적의 결과를 얻기 위해 Sequential Quadratic Programming(SQP) 기법을 사용한다. 최상층의 횡변위에 대한 각 부재의 변위기여도를 단위하중법을 통해 구하고, 이를 최상층의 횡변위가 감소하도록 각 부재의 단면을 재설계한다. 각 부재의 변위기여도를 이용하여 부재의 단면을 재설계하는 과정은 구조물의 초기 강성을 향상시키는 효과를 가진다. 동시에, 제시된 기법은 기둥-보 휨강도비를 제약함으로써 구조물의 연성을 조절하도록 한다. 제시된 최적변위설계기법은 철골골조 예제에 적용하여 적용성을 검증한다. 적용한 결과 제시된 기법을 통해 구조물의 초기강성과 연성능력이 조절되는 것을 확인할 수 있었다.

• 디지털산업정보학회논문지
• /
• 제11권3호
• /
• pp.145-158
• /
• 2015

Disposable marine product packaging materials such as wooden, Styrofoam, and corrugated cardboard boxes have a very low reuse rate, thus causing the logistics costs to rise and making it difficult to establish a unit load system for marine products. Disposable packing containers to be discarded are accompanied by resource and environmental issues home and abroad. Transportation vehicles for marine products have to return empty without loading different kinds of products after delivery due to the smell and properties of marine products, thus posing as an obstacle to logistics rationalization. In an effort to overcome those limitations, this study examined the stages of transportation including "producer-wholesale market in the producing area-commission merchant-wholesale market in the consumption area-commission merchant-quasi-wholesale market-consumer" and also analyzed the utilization and distribution of disposable packaging materials currently used in the circulation of marine products including wooden, Styrofoam, and corrugated cardboard boxes. Based on the analysis results, the investigator developed a logistics rationalization model capable of promoting semi-permanent reuse and lowering empty vehicle rate on return routes as an alternative to address environmental issues caused by disposable packaging materials, which have been an obstacle to the logistics rationalization of marine products, packaging costs in the process of repeating packing and unpacking at each stage of marine products circulation, and empty vehicle rates on return routes after marine products delivery.