• 한국건축시공학회지
• /
• 제1권2호
• /
• pp.185-190
• /
• 2001

The purpose of this study is the development of practical Dry floor tile unit method that settle the defect of a wet method and designed for resin mat. With use of PE resin which is confirmed the basic property, it is developed that resin mat, joint-sealing compound with fixed form and space management to Dry floor tile unit method. The result of this study is below. 1) To acquire above the 4kgf/$\textrm{cm}^2$ - construction specification criterion, the bonding space that between resin mat and tile has to occupy the 50% of resin mat module space(10,000$\textrm{cm}^2$). 2) Criteria of bonding part plane is below. simpleness of metal form. productivity, uniform quality after injection molding cooling, easy cutting for remain space management, adhesive property, construction ability, transformation of a severed piece under pressure and so on. 3) To get the shape that could protect the interfacial breakdown, it is designed that resin mat and tile are unified after the bond input. 4) Adapted joint-sealing compound is the material of urethane kinds wedge form. Resin mat has the water passageway that could drain the water. 5) To manage the severed piece of tile, the resin mat is likely to divide the half and the quarter and the plastic drainage is developed in the severed piece.

• 한국산학기술학회논문지
• /
• 제16권2호
• /
• pp.1571-1578
• /
• 2015

전산유체역학(CFD)을 이용하여 산업체에 널리 적용되고 있는 충격기류형 탈진시스템의 탈진 특성을 규명하고, 그 성능을 향상시키기 위해 탈진부 유니트(unit) 형상을 개조한 경우의 탈진 성능을 비교하였다. 탈진부 각 형상에 대해 검토한 결과, 블로우 튜브에 노즐을 설치한 경우(Case 3)와 벤츄리에 이중 유입관을 설치한 경우(Case4, 5)가 현재 현장에서 널리 적용되고 있는 구조(Case 1)에 비해 우수한 것으로 예측되었다. 또한 최적 형상의 벤츄리를 설계하고, 이 벤츄리를 pilot plant에서 실험하여 현장 적용성을 분석하였다. 블로우 튜브와 본 연구에서 제안한 벤츄리를 조합한 시스템의 경우, 기존 시스템(블로 튜브만 사용한 경우와 블로 튜브와 벤츄리를 조합한 경우)에 비해 탈진 기류를 집중시키는데 매우 효과적인 것으로 나타났다. 또한 본 연구에서 제안한 벤츄리를 장착하여 테스트한 결과, 산업 현장에서 사용 중인 상용 벤츄리를 사용한 경우 보다 탈진횟수 및 탈진시간이 많이 향상되는 결과를 보였다.

• 한국정밀공학회지
• /
• 제21권4호
• /
• pp.109-119
• /
• 2004

Rapid prototyping (RP) technologies have been widely used to reduce the lead-time and development cost of new products. $VLM-_{ST}$ process has been developed to overcome the currently developed RP technologies such as a large building time, a high building cost, an additional post-processing and a large apparatus cost. $VLM-_{ST}$ process requires an additional human interaction due to the manual stacking and bonding. Hence, building time, building cost and the part quality are dependent on the skill of labor. A novel RP process, fully automated $VLM-_{ST}$ process ($VLM-_{ST}$), has been developed to improve building efficiency of the process and the human dependency of the part. The objective of this work is to propose a $VLM-_{ST}$ process and to develop an apparatus for implementation of the process. $VLM-_{ST}$ process and its apparatus have various technical novelties such as two step cutting using a rotating table, an automatic stacking method using two pilot holes and two reference shapes, a concept of automatic unit shape layer (AUSL), and an automatic bonding using the bonding roller and building magazine. In order to examine the efficiency and the applicability of the proposed process, various three-dimensional shapes, such as a piston, a human head shape and a human bust shape, were fabricated on the apparatus.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.578-585
• /
• 2000

Geometrical characteristics of fresh red pepper(Capsicum annuum L.) were measured and indexed to define some important geometrical characteristics, and malformation of body and fruit stalk which are necessary for the design of the equipments for cutting, spreading and alignment of red pepper in developing a fruit stalk remover of fresh red pepper. The effects of bending of body and fruit stalk on the equipments of cutting, spreading and alignment were studied. The maximum lengths of some parts of fresh red pepper were found to be 180 mm, 125 mm, 144 mm, 67 mm and 76 mm for the body, the bent part of body, the fruit stalk, the bent part and the straight part of fruit stalk, respectively. The fresh red pepper with bending indices more than 0.4 and 0.3 for the body and the fruit stalk, respectively, was defined to be malformed based on the result of cutting rate using cutting unit; while the other ones to be normal in shape. Based on this, among the total fresh red peppers tested, 47%, 40% and 20% were found malformed for the body, the fruit stalk, and for both of the body and the fruit stalk. Malformed red peppers were poorer in spreading and alignment than normal ones, and the processed quantity was decreased with increased feed rate. The required time for the malformed peppers to pass on the alignment plate inclined at 30 increased rapidly at 8.3 Hz with increased feed rate. For the fresh red peppers with average moisture content of 85%,w.b., the maximum tensile strength between fruit stalk and body was 88.1 N; the maximum cutting resistances were 92.1 N and 94.9 N for the fruit stalk-calyx joint and body, respectively. Average coefficients of static friction were 0.99, 0.62, 0.59 and OJ, respectively, for the surfaces of rubber, galvanized iron, acryl and plywood.

• 수산해양교육연구
• /
• 제23권4호
• /
• pp.642-647
• /
• 2011

In order to analyze the influence of floating marine debris (FMD) in the East China Sea (ECS), a sighting survey was conducted from July 1st to July 14th, 2009 navigating about 966 km using a training vessel "Kaya (1,737 ton)" of Pukyong National University. The sampled zones are divided into 5 transect by observation day during the survey days and again specified with 45 segments per unit hour on the survey routes. The results of distribution of FMD are as follows: 1. The quantities of FMD at the central China Sea(CE) and northern part of Taiwan(NT) were found as total mean of 90.8 ea/hr, 56.7 ea/hr, respectively, and also 36.8 ea/hr, western part of Kyushu district(WJ), 10.7 ea/hr, 8.0 ea/hr, western(OK1) and northern part(OK2) of Okinawa, respectively. 2. Temporal variation of FMD is represented by depicting the sinusoidal curve as shape as tide in CE and OK1. 3. The higher sea surface temperature (SST) is as likely as if Kuroshio current exists strongly, the less quantities are decreased. On the other hand, the coastal zone of ECS and near of Yellow Sea are increased by lower SST.

• 한국수자원학회논문집
• /
• 제36권2호
• /
• pp.161-172
• /
• 2003

본 연구에서는 주어진 수위관측망이 유역의 유출특성을 효과적으로 잡아낼 수 있느냐 하는 것에 초점을 맞추어 수위관측망을 평가하였다. 어떤 특수한 목적의 수위관측이나, 댐과 같은 구조물의 영향은 고려하지 알았으며, 단지 현존하는 수위관측소가 자연유량을 관측한다는 전제 하에 주어진 관측망의 최적화를 시도하였다. 본 연구는 남한강유역 내 총 31개의 수위관측소를 대상으로 수행하였으며, 수위관측망의 최적화에는 엔트로피의 개념을 이용하였다. 본 연구의 결과를 정리하면 다음과 같다. (1) 유역의 응답특성을 나타내는 대표단위도는 확률밀도함수로 변환하여 엔트로피의 개념에 효과적으로 적용할 수 있다. (2) 각 수위관측지점 대표단위도의 정확한 유도가 수위관측망의 평가 과정에서 가장 중요한 역할을 하였으며, 본 연구에서는 관측된 강우-유출 기록을 이용하여 유도한 단위도와의 비교를 통해 지형특성자료를 이용한 합성단위도의 이를 확인하였다. (3) 본 연구의 대상인 남한강 유역에는 대략 28개 이상의 수위관측소가 필요한 것으로 판단되며, 이 수는 단위도의 형상 및 유량의 크기를 모두 고려한 결과이다. 단위도의 형상만을 고려하는 경우에는 이보다 적은 23개의 수위관측소가 필요한 것으로 나타났다.

• 한국가스학회지
• /
• 제26권2호
• /
• pp.9-13
• /
• 2022

벨트나 체인을 이용한 감속기는 간단한 장치이긴 하지만 공간을 많이 차지하여 공간상의 제약이 있기 때문에 전동휠체어 구동부에는 부적합하다. 하지만 유성기어형태의 감속기는 동일 축에서 감속이 이루어지기 때문에 부피를 작게 할 수 있어 공간의 제약이 벨트나 체인형태의 감속기보다 덜하다. 따라서 본 연구에서는 수·전동전환이 가능한 휠체어의 구동부에 대한 연구를 통하여 유성기어형태를 이용한 감속기로 큰 추진력을 얻을 수 있는 구동부를 개발하였다. 그에 따라 감속기에 적용되는 유성기어의 치형을 Kisssoft 프로그램을 이용하여 설계를 진행하였다. 또한 기존 휠체어 바퀴에 적용 가능하도록 구동부의 설계를 진행하였고, 구동부의 수·전동 전환원리 및 작동원리에 대한 메커니즘의 최적화를 진행하였다. 연구내용을 토대로 하나의 선기어와 2개의 유성기어, 하나의 링기어를 갖는 유성기어 형태의 휠체어 감속기 구동부의 최종 설계 및 제작을 진행하였다.

• 한국생활과학회지
• /
• 제24권3호
• /
• pp.407-421
• /
• 2015

This study examined the pixel's expression trend and nature featured in contemporary fashion, which works as a basic unit symbolizing the digital image, paying attention to its formativeness. The work through this process aimed at suggesting an opportunity for recognition about pixel image utilized as a formative component beyond its simple meaning of unit and providing the fundamental materials for usage in creative fashion design reflecting the digital emotion in the future, In research method, literature review was followed on pixel and the empirical study about its image was also performed that was found in the modern fashion. As a result, the trend in pixel has these characteristics. Its first nature lies in its plane expression. It was printed as mosaic or graphic grid image or expressed through patchwork technique. Also, rather than a certain form or figure, its unique image was emphasized according to the applied color, size, and position. Second, a stepwise pattern in pixel was applied to external format for part of clothing, eye glass and necktie, indicating some interest and wit. Third, in application to plane and external shape, the graphically modernized effect was realized, not to mention the illusive image with cubic expression. As shown, the characteristics in contemporary fashion via pixel expression were given in fantastic image, optical humor, and reflection of digital value.

• 한국화재소방학회논문지
• /
• 제27권6호
• /
• pp.89-96
• /
• 2013

본 연구의 목적은 연소 실험을 통하여 에어컨 실내기의 화염확산에 관한 형상을 관찰하여 화재원인 및 발화지점을 확인하기 위함이다. 본 실험은 화염이 주변으로부터 에어컨 상단에 옮겨 붙는다는 것을 가정하여 실내기 상단을 n-햅탄을 적신 천으로 착화시켰으며, 동일한 조건으로 2회의 반복실험을 하였다. 착화 후 559 s와 734 s 사이에 실내기와 연결된 냉매관이 파열되면서 내부에 충입되어 있던 냉매와 함께 윤활유가 커다란 폭음을 내며 고온 고압의 화염이 급격히 분출되었으며 연소 잔류물을 확인한 결과, 증발기 일부와 모터, 금속함 등을 제외한 대부분은 소실되었다. 에어컨 자체에서 발화되었을 경우와 외부 화염에 의해 소훼되었을 경우 배선의 합선흔적 위치는 유사하였다. 따라서 연소 잔류물의 형상만으로 발화원인과 지점을 특정 짖는 것은 불확실하다는 것을 확인하였다.

• 한국실내디자인학회논문집
• /
• 제21권2호
• /
• pp.215-222
• /
• 2012

Design-build is expanding gradually in large construction projects over 10billion won, and continue to work in health care facilities is increasing in this way. This constructional method in health care facilities, despite the many advantages, many problems caused by design changes are being raised. Raises the question of design changes on the side of construction contract, such as approval systems have been studied in the field of construction. The purpose of this study design in aspects of architectural planning on changing the grasp of the issues outlined in the ITB and bid evaluation criteria through consideration of the basic plan for improvement guidelines and evaluation criteria is presented. In conclusion, Design build, according to the presence of existing users are more likely to lead to design changes. Thus, hospital architecture, depending on how it is considered that constructional methods. And evaluation items of ITB(Invitation To Bidder) for a large part of the change in the variables evaluated in the hospital building is not suitable for the design build. Instead, the overall shape of the building and department, unit type and size, vertical and horizontal parts of the circulation system in the shape of the building that does not change in structure and etc should be considered for evaluation.