• Molecules and Cells
• /
• 제19권3호
• /
• pp.428-435
• /
• 2005

This study was carried out to assess the potential of SSR markers for variety identification by comparing SSR markers and morphological traits in tests of distinctiveness, uniformity, and stability (DUS) of pepper (Capsicum annuum L.) varieties. Twenty-seven SSR markers were polymorphic in 66 pepper varieties, revealing a total of 89 alleles. Average polymorphism information content (PIC) value was 0.529, ranging from 0.03 to 0.877. Cluster analysis of the band patterns separated the varieties into three groups corresponding to varietal types. Morphological trait-based clustering showed some degree of similarity to dendrogram topologies based on the SSR index. However, no significance correlation was found between the SSR and morphological data. SSR markers could be used to complement a DUS test of a candidate variety and to select complimentary varieties by pre-screening existing varieties in the context of protecting new varieties of pepper.

• 산업경영시스템학회지
• /
• 제40권3호
• /
• pp.1-6
• /
• 2017

Process capability is well known in quality control literatures. Process capability refers to the uniformity of the process. Obviously, the variability in the process is a measure of the uniformity of output. It is customary to take the 6-sigma spread in the distribution of the product quality characteristic as a measure of process capability. However there is no reference of process capability when maximum material condition is applied to datum and position tolerance in GD&T (Geometric Dimensioning and Tolerancing). If there is no material condition in datum and position tolerance, process capability can be calculated as usual. If there is a material condition in a feature control frame, bonus tolerance is permissible. Bonus tolerance is an additional tolerance for a geometric control. Whenever a geometric tolerance is applied to a feature of size, and it contains an maximum material condition (or least material condition) modifier in the tolerance portion of the feature control frame, a bonus tolerance is permissible. When the maximum material condition modifier is used in the tolerance portion of the feature control frame, it means that the stated tolerance applies when the feature of size is at its maximum material condition. When actual mating size of the feature of size departs from maximum material condition (towards least material condition), an increase in the stated tolerance-equal to the amount of the departure-is permitted. This increase, or extra tolerance, is called the bonus tolerance. Another type of bonus tolerance is datum shift. Datum shift is similar to bonus tolerance. Like bonus tolerance, datum shift is an additional tolerance that is available under certain conditions. Therefore we try to propose how to calculate process capability index of position tolerance when maximum material condition is applied to datum and position tolerance.

• 한국결정성장학회지
• /
• 제9권6호
• /
• pp.597-600
• /
• 1999

단결정규소 웨이퍼를 15% HF-에탄올 용액에서 양극 산화시켜 다공질규소를 얻는 과정에서 전류밀도와 에칭시간에 따라 굴절률이 주기적으로 변하는 다층의 다공질규소층(porous silicon multilayers)을 구현하였다. 그리고 다층의 다공질규소층(I), 다공질규소 발광층, 또 다른 다층의 다공질규소층(II)의 순으로 구성된 porous silicon microcavity(PSM)를 제작하고 그 물성을 조사하였다. PSM 상하에 위치한 다층의 다공질규소층의 단면을 AFM(Atomic Force Microscope)으로 조사한 결과 고굴 절률과 저굴절률이 주기적으로 교차하는 층이 균일하게 형성되었으며, 중앙의 다공질규소 발광층도 균일하게 나타났다. 다층의 다공질규소층 및 다공질규소 발광층의 두께를 각각 실효파장의 1/4배 및 2배가 되도록 하였을 때 특정파장의 필터로 쓰일 수 있는 브래그 반사경(Bragg reflector)의 특성이 나타났다. 또한 PSM의 발광 스펙트럼은 그 반치폭이 현저히 감소하고 발광의 세기가 크게 증가되는 경향을 보였다.

• 한국조리학회지
• /
• 제19권3호
• /
• pp.33-45
• /
• 2013

본 연구는 커피 실버스킨을 밀가루 중량에 대해서 0%, 3%, 5%, 7%로 대체 첨가하여 옐로우 레이어 케이크의 특성을 알아보았다. 반죽의 비중은 실버스킨 첨가량이 증가할수록 유의적으로 증가하였으며, 비용적은 실버스킨 함량이 많을수록 유의적으로 감소하였다. 부피지수는 실버스킨 첨가량이 증가함에 따라 유의적으로 감소하였으며, 대칭지수와 균일지수는 유의적인 차이가 없었다. 대조구의 부피지수, 대칭지수와 균일지수가 가장 높게 측정되었다. 조직감에서는 대조구가 가장 낮은 경도와 가장 높은 탄력성을 나타내었다. 시간이 경과함에 따라 실버스킨 첨가량이 많을수록 경도는 높아졌으나 탄력성은 낮아졌다. 관능검사 결과, 조직감을 제외한 모든 항목에서 대조구에 비해 실험군의 수치가 높았으며, 그 중에서 향과 맛은 SS5가 가장 높았고 외관과 전체적인 기호도는 SS3이 가장 높았다.

• 한국식품과학회지
• /
• 제40권4호
• /
• pp.412-418
• /
• 2008

밀가루에 콩섬유 FIBRIM(R)1450을 4-24%까지 첨가한 결과 콩섬유의 첨가량이 증가할수록 스펀지 케이크의 부피와 비용적은 유의적으로 감소하였다. 단백질 함량과 보수율은 반죽의 비중 및 스펀지 케이크의 비용적과는 각각 부의 상관이 있었으나, Mixograph 특성과 케이크의 비용적 사이에는 상관관계가 존재하지 않았다. 스펀지 케이크의 symmetry index와 uniformity index는 콩섬유의 첨가량에 상관없이 일정한 값을 나타내었다 케이크 크러스트와 크럼의 L값은 콩섬유의 첨가량이 증가할수록 감소하는 경향을 보였으나 a값과 b값은 큰 차이를 나타내지 않았다. 스펀지 케이크의 경도, 검성과 씹힘성은 콩섬유의 첨가량이 증가함에 따라 약간 증가하는 경향을 나타내었다. 스펀지 케이크의 경도, 탄성, 검성 및 씹힘성은 단백질 함량, 침전가, 보수율 및 알칼리수 흡수율과는 정의 상관이 있는 반면, Pelshenke값과는 부의 상관을 나타내었다. 콩섬유를 첨가한 복합분의 스펀지 케이크 관능검사 결과, 외부 색깔, 기공, 조직감, 내부 색깔, 향기 등은 콩섬유의 첨가에 통계적으로 유의적인 영향을 받지 않았으나 맛과 전체적인 기호도는 콩섬유를 20% 이상 첨가하였을 때 약간 저하됨을 알 수 있었다.

• 한국자동차공학회논문집
• /
• 제22권3호
• /
• pp.171-178
• /
• 2014

From now on, in order to meet more stringer diesel emission standard, diesel vehicle should be equipped with emission after-treatment devices as NOx reduction catalyst and particulate filters. Urea-SCR is being developed as the most efficient method of reducing NOx emissions in the after-treatment devices of diesel engines, and recent studies have begun to mount the urea-SCR device for diesel passenger cars and light duty vehicles. That is because their operational characteristics are quite different from heavy duty vehicles, urea solution injection should be changed with other conditions. Therefore, the number and diameter of the nozzle, injection directions, mounting positions in front of the catalytic converter are important design factors. In this study, major design parameters concerning urea solution injection in front of SCR are optimized by using a CFD analysis and Taguchi method. The computational prediction of internal flow and spray characteristics in front of SCR was carried out by using STAR-CCM+7.06 code that used to evaluate $NH_3$ uniformity index($NH_3$ UI). The design parameters are optimized by using the $L_{16}$ orthogonal array and small-the-better characteristics of the Taguchi method. As a result, the optimal values are confirmed to be valid in 95% confidence and 5% significance level through analysis of variance(ANOVA). The compared maximize $NH_3$ UI and activation time($NH_3$ UI 0.82) are numerically confirmed that the optimal model provides better conversion efficiency of $NH_3$. In addition, we propose a method to minimize wall-wetting around the urea injector in order to prevent injector blocks caused by solid urea loading. Consequently, the thickness reduction of fluid film in front of mixer is numerically confirmed through the mounting mixer and correcting injection direction by using the trial and error method.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권4호
• /
• pp.443-448
• /
• 2015

선박용 질소산화물 저감장치의 혼합영역에서 유동혼합 성능을 개선하기 위해 스월형 혼합기가 개발되었다. 본 연구에서는 스월형 혼합기와 각단의 날개 각도가 조절 가능한 다단 스월형 혼합기가 고려되었다. 두 스월형 혼합기의 최적 날개 각도를 도출하기 위해 날개 각도가 균일지수 및 압력강하에 미치는 영향을 수치해석 기법을 이용하여 조사하였다. 스월형 혼합기에서는 혼합기의 날개 각도를 $10^{\circ}$ 에서 $80^{\circ}$ 까지 변화시킬 때, 최적의 유동혼합 성능은 베인 각도 $30^{\circ}$에서 $60^{\circ}$ 범위에서 나타났으나, 압력강하는 베인 각도 증가에 따라 선형적으로 증가하였다. 반면 다단 스월형 혼합기에서는 각 단의 날개각도를 조절함으로써 압력강하를 낮추면서도 높은 혼합성능의 유지가 가능함을 보였다.

• 한국의류산업학회지
• /
• 제20권5호
• /
• pp.600-607
• /
• 2018

Polypropylene fibers, while having many advantages such as light weight, sweat fast drying, water-repellent, drainage, thermal insulation, anti-static property has a drawback in dyeing. In recent years, the development of dyeable polypropylene fibers has expanded its value in the textile market. The purpose of this study is to fabricate composite spun yarns using polypropylene, acrylic, rayon and wool and to analyze tensile properties, uniformity characteristics, bending properties, hairiness, and surface shape according to the degree of fineness and blended ratio. The specimens consisted of 100% polypropylene spun yarn pp30, pp40 and ppa(pp/acrylic), ppr(pp/rayon), ppw(pp/wool), 5 altogether sed in this study. The results of the study are as follows. The breaking strength of polypropylene spun yarn blended with rayon and acrylic was higher than that of 100% polypropylene spun yarn. The polypropylene spun yarn is higher the fineness been shown to decrease the breaking strength and elongation. The bending properties of polypropylene spun yarns were in the order of ppa>ppr>pp40>pp30>ppw. The unevenness of ppw, ppr, and ppa was higher than pp40 and pp30. With the exception of ppw with crimp properties, pp30 and pp40 were found to have a hairiness index greater than ppr, ppa. In the microscopic photographs of polypropylene spun yarn, pp30, which had the highest hairiness index, was found to have a thick yarn and a large number of hairs, and ppw had hairs of 3 mm or more protruding elongated outwardly.

• 한국조경학회지
• /
• 제26권2호
• /
• pp.240-250
• /
• 1998

This study is to have attempted to analyze the characteristics of the change in forest landscape pattern of Seoul for 18 years by grasping it through satellite image data on the forest area in Seoul where a rapid change according urbanization and industrialization is going on. On the basis of Landsat MSS data- satellite image data, this writer analyzed the change in the number and size of patch and the mean edge length of each forest land, and the index of patch shape by each year from a landscape -ecological point of view. The results are as follows; First, in the pattern change of the forest patch of Seoul, the highest patch fragmentation area is the forest of the Yangchon-gu district where is decreasing it forest area by 654ha, 511ha, 495ha, 402ha each year from its total size of 742ha in 1979. Second, the change tendency shows that the average forest size decreased at 552.58ha in 1983, 435.03ha in 1988, 396.23ha in 1992, and 379.96ha in 1996. And analysis showed that even in the number of patches, the forest fragmentation phenomenon was presenting by the increase of development disturbance. Third, the mean edge by year was longest at 23,385m in 1979, but it is decreasing continuously. This shows the regular and artificial uniformity of forest landscape by disturbance-effect increase of the built-up development and shows low portion against edge effect by the time-series change like 1979>1983>198>1992>1996. Finally, in the analysis of a shape index indicated by ratio of size and edge, total averages were 2.56, 2.33, 2.17, 2.14, 2.14 each year, so that it is considered that the disturbance and ecological health status against forest landscape can be grasped according to being examined as 1979>1983>1988>1992, 1996 by the time-series change of the landscape.

• 센서학회지
• /
• 제22권2호
• /
• pp.144-149
• /
• 2013

In this research, we developed a biosensor to detect lung cancer-specific biomarker using Anodic Aluminum Oxide (AAO) chip based on interference and nano surface plasmon resonance (nanoSPR). The nano-porous AAO chip was fabricated $2{\mu}m$ of pore-depth by two-step anodizing method for surface uniformity. NanoSPR has sensitivity to the refractive index (RI) of the surrounding medium and also provides simple and label-free detection when specific antibodies are immobilized to the Au-deposited surface of nano-porous AAO chip. To detect the lung cancer-specific biomarker, antibodies were immobilized on the surface of the chip by Self Assembled Monolayer (SAM) method. Since then lung cancer-specific biomarker was applied atop the antibodies immobilized layer. The specific reaction of the antigen-antibody contributed to the change in the refractive index that cause shift of resonance spectrum in the interference pattern. The Limit of Detection (LOD) was 1 fg/ml by using our nano-porous AAO biosensor chip.