• Journal of the Korean Society for Heat Treatment
• /
• v.35 no.2
• /
• pp.57-65
• /
• 2022

In this study, the effect of the initial particle size distribution (PSD) of (K_0.5Na_0.5)NbO₃ powders on the microstructure of sintered ceramics was investigated. (K_0.5Na_0.5)NbO₃ powders with uni-, bi-, tri-, and quad-modal PSDs were obtained through a planetary ball-mill. For the specimens sintered at 1080℃, the growth of abnormal grains was promoted from the powders exhibiting quad- and tri-modal PSDs with a high content of large particles, resulting in a microstructure in which huge abnormal grains were predominant. However, as the number of peaks in PSD and the overall particle size decreased, the abnormal grain growth was suppressed and the grain growth of small particles started, resulting in a microstructure with a uniform grain size. For the specimens sintered at 1100℃, huge abnormal grains were not observed due to the decrease in the critical driving force for 2D nucleation even when powders with quad- and tri-modal PSDs were used. It was confirmed that when powder with unimodal PSD was used, a uniform microstructure that was not significantly affected by the sintering temperature could be obtained. The results of this study demonstrate that the microstructure of (K_0.5Na_0.5)NbO₃-based ceramics can be controlled by controlling the particle size of the initial powder.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.590-592
• /
• 2003

The presence of congestion in transmission system can reduce the market size and split bulk system into smaller system. Consequently, this creates the problem concerining Local Market Power and can be main reason for the inclose of practical market price. In this paper, a range of indices have been derived to quantify the degree of local market power through statistical analysis in the uniform pricing market. Application of the indices has been illustrated using the electricity market in Korea. The indices proposed in this paper seem to be effectively applied in electricity market under uniform pricing scheme.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.2
• /
• pp.109-113
• /
• 2011

Hot air flow simulations of the wet station dryer module for the solar cell cleaning were conducted. Air incident angles such as to the substrates ($45^{\circ}$), to the bottom ($90^{\circ}$), and to the wall ($135^{\circ}$) were considered. Based on the simulated velocity and temperature profiles, appropriate incident angle was proposed, and it was well matched to experimental results. Additionally, uniform and non-uniform air hole sizes of the tube were compared for the uniform air flow distribution through the batch.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.8
• /
• pp.1471-1475
• /
• 2007

In this paper, a novel embedded ultra wideband (UWB) band-pass filter is presented on a FR-4 package substrate including high Dk resin coated copper (${\varepsilon}_r=30$) film. The proposed UWB filter is comprised of a parallel resonator with meander-type uniform impedance resonator (UIR) and two series resonators with high Q circular stacked spiral inductor and metal-insulator-metal (MIM) capacitor. In order to obtain excellent attenuation characteristics by generating attenuation poles in lower and upper stop bands, a single MIM capacitor is added to each resonator. The fabricated FR-4 embedded UWB filter has insertion loss of -1.0dB and return loss of -11dB, respectively. It has also extremely wide bandwidth (over 50%) and small size ($3.7{\times}4{\times}0.77\;mm^3$) which is compatible with LTCC devices.

• Transactions of Materials Processing
• /
• v.7 no.6
• /
• pp.610-619
• /
• 1998

The superplastic blow forming technology has advantages of cost reduction and low material consumption. compared to the conventional sheet metal forming technology due to the capability of precisely forming with high elongation and low flow stress. however it has a disadvantage that its partial thickness distribution is non-uniform. A processing technology like diaphragm forming has been developed even though it is difficult to prepare materials for superplastic blow forming. in this study a hemisphere forming of sheet before superplastic forming. It was found that the rotary forming material was less in quantity of cavitation at pole than that of hemisphere part that was superplastic formed without rotary forming treatment. Also discussed are the critical strain which is closely related to cavity shape and size.

• Coupled systems mechanics
• /
• v.8 no.3
• /
• pp.247-257
• /
• 2019

Fee vibrational characteristics of porous steel double-coupled nanoplate system in thermo-elastic medium is studied via a refined plate model. Different pore dispersions called uniform, symmetric and asymmetric have been defined. Nonlocal strain gradient theory (NSGT) containing two scale parameters has been adopted to stablish size-dependent modeling of the system. Hamilton's principle has been adopted to stablish the governing equations. Obtained results from Galerkin's method are verified with those provided in the literature. The effects of nonlocal parameter, strain gradient, foundation parameters, porosity distributions and porosity coefficient on vibration frequencies of metal foam nanoscale plates have been examined.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.7
• /
• pp.923-932
• /
• 2001

A series of experiments were conducted to generate fine liquid(water) drops through the electrohydrodynamic atomization process. The atomization mode depended on flow rate and DC voltage input. For water, having electric conductivity larger than 10(sup)-7S/m, the spindle mode turned out to be the only mode to generate uniform-size drops within the range of 30-450 microns that have wide applications. Within this mode, both the uniformity and the fineness of drops were improved at an optimum voltage input for a given flow rate. This optimum voltage increased with increasing of the liquid flow rate. Another important parameter considered was the nozzle material with different electric conductivity and liquid wettability. A stainless-steel nozzle (the material with high electric conductivity and high liquid wettability) and a silica nozzle (the electrically non-conducting material with low liquid wettability) were tested and compared; and more uniform drops could be obtained with the silica nozzle.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.11
• /
• pp.1384-1394
• /
• 2004

The purposes of this study were to investigate the current performance of 119 rescue uniforms and to improve them in terms of fitness, mobility, functionality, and convenience. This study was conducted a questionnaire survey on rescuers in 22 rescue squads in Seoul through direct. observations and face-to-face interviews to investigate the dissatisfaction of their uniforms. According to the results of this survey, respondents were highly dissatisfied with the fitness of uniforms, design, and functionality. liking into consideration of the problems found through this survey, an experimental uniform was developed as follows. The girth and width of the experimental uniform were designed to be more ample than the current uniforms and the jacket could be worn over pants. And the size and the number of pockets were increased in both the Jacket and trousers. In addition, the hems of the sleeves and trousers as well as the fly front of the jacket were improved. Furthermore, darts were added to the front and back of the knees to improve knee movement. Then an experimental uniform was evaluated through three sequences of wearing tests to compare it with the current uniforms: the evaluation of the appearance, mobility. and performance at field activity. According to these tests, the experimental uniform was found to be more satisfactory than former one.

• Journal of the Korean Ceramic Society
• /
• v.49 no.2
• /
• pp.161-166
• /
• 2012

The temperature-rasing sintering method was used in this study to fabricate the aggregates of uniform pore size and distribution containing reject ash occurred in the thermal power plant. The spheric green aggregates made of reject ash were put into the box furnace of 800~$1000^{\circ}C$, heated with a heating rate of 5~$15^{\circ}C$/min to 1200~$1275^{\circ}C$, sintered for 10 min and then discharged out of the furnace to the room temperature. The input temperature, heating rate and sintering temperature increased the bloating phenomenon of the specimen, and the sintering temperature among them was the most effective factor. The aggregate manufactured at $1275^{\circ}C$ had the specific gravity of about 1.0 and water absorption of 1~2%, and the pores of 500~1,000 ${\mu}m$ were uniformly distributed across the whole specimen. Especially, the aggregates fabricated using the temperature-rasing sintering method in this study showed an excellent bloating properties and uniform microstructure without black core phenomenon which is typical for the bloated ceramics synthesized by direct sintering method.

• Journal of Communications and Networks
• /
• v.5 no.3
• /
• pp.249-257
• /
• 2003

Ring networks are very commonly exploited among local area and metropolitan area networks (LAN/MAN), whereas cells or small fixed-size packets are widely used in synchronized ring networks. In this paper, we present an analytical method for evaluating the delay-throughput performance of a MAC protocol with multiple self-tokens in a slotted ring network under uniform traffic. In our analysis, we introduce the stationary probability, which indicates the number of packets in a node. Also, it is assumed that each node has a sufficiently large amount of self-tokens, and a slotted ring has the symmetry. The analytical results with respect to delay-throughput performance have similar values to computer simulated ones. Furthermore, in order to achieve fair access under non-uniform traffic, we propose an adaptive MAC protocol, where the number of self-tokens in a node dynamically varies, based on the number of packets transmitted within a specified period. In the proposed protocol, when the number of packets transmitted by a node within a specified period is larger than a specified threshold, the node decreases the number of self-tokens in a per-node distributed method. That results in creating free slots in the ring, thus all nodes can obtain an equal opportunity to transmit into the ring. Performance results obtained by computer simulation show that our proposed protocol can maintain throughput fairness under non-uniform traffic.