• 한국초전도ㆍ저온공학회논문지
• /
• 제2권1호
• /
• pp.31-34
• /
• 2000

this paper deals with the initial magnetic field decay for a large scale superconducting magnet e.g. NMR/MRI magnet. The high resolution image can not be obained during the periods of the initial field decay. It is known that all superconducting materials have the property of diamagnetism. This diamagnetism is usually explained with the concept of screening current. We assumed that the existence of the screening currebt. we assumed that the existence of the screening current makes the current distribution in the superconducting wire non-uniform. And the initial magnetic field decay is caused steady current state in the view of its pattern. The initial magnetic field decay is caused by the change of the current distribution between the energizing state and persistent current mode. in this paper the theoretical analysis for the current distributions has been introduced for each state. The experiments have been carried out to verify transport currents in order to veperiments, it small at the higher transport current.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2003년도 High Temperature Superconductivity Vol.XIII
• /
• pp.55-55
• /
• 2003

• 전자공학회논문지SC
• /
• 제39권3호
• /
• pp.191-200
• /
• 2002

본 논문에서는 다변수 다치 논리함수에 대하여 구간함수를 절단 차분 함수로 변환하는 방법을 제시하였고, 절단 차분 함수를 전류모드 CMOS에 의한 전류 미러 회로와 금지회로를 사용하여 일정한 패턴을 갖는 다치 논리회로로 구현하는 방법을 제시하였다. 또한 제시한 방법을 2변수 4치 MOD(4) 가산 진리표와 2변수 4치 유한체 GF(4)상의 승산 진리표를 실현하는 회로의 구현에 적용하였다. PSpice 시뮬레이션을 통하여 이 회로들에 대하여 동작특성을 보였다. 회로들의 시뮬레이션은 2㎛ CMOS 표준 기술을 이용하였고, 단위 전류를 15㎂로 하였으며, 전원전압은 3.3V를 사용하였다. 본 논문에서 제시한 전류모드 CMOS에 의해 구현된 회로들은 일정한 패턴, 상호연결의 규칙성을 가지며, 다치 논리함수의 변수의 확장성을 가지므로 VLSI 실현에 적합할 것으로 생각된다.

• 전자공학회논문지D
• /
• 제36D권8호
• /
• pp.45-53
• /
• 1999

접지된 유전체층 위의 유한한 개수의 도체스트립에 의한 전자기 산란문제를 TM편파의 경우에 대하여 송수신 누설파 안테나와 격자결합기의 관점에서 고려하였다. 도체스트립에 유기된 전류를 미지수로 하는 적미분 방정식을 유도하고 모멘트법을 이용하여 풀었다. 도체스트립에 걸쳐서 특정한 전원(전류) 분포를 갖는 비균일한 누설파 구조를 구성하기 위하여 누설파 구조를 따라 인접하는 스트립들 사이의 거리의 스트립의 폭이 함께 변화되었다. 도체스트립의 전류분포 및 표면파 전력에 대한 해석결과들로부터 적절히 구성된 비균일한 누설파 구조의 수신 누설파 안테나 및 적자결합기 관점에서의 최대 결합효율이 균일한 구조에서의 80%에 비해 15%정도 개선된 95%가 됨을 관찰하였다.

• 복식
• /
• 제64권6호
• /
• pp.148-160
• /
• 2014

This study proposed the design development of performance uniform for Korean classical music. To do this, we considered the state of the performance uniform of the Korean Classical Music Band through photographic data. The research targeted the performers in Korean Classical Music Band, and conducted a survey for the preference of type, pattern, decoration, color and fabric materials. Based on the results, we extracted the design of performance uniform, which is suitable for the environment of Korean classical music performance and meets the substantial requirements of performers. The performance uniform that the current national or public Korean classical music bands are using, has two types: Western clothing and Hanbok. The attire is influenced by the genre of the music that they are playing because one of its main functions is to deliver the music to audience effectively. In addition, there are some differences in the uniform based on the gender, but no division in the design of clothing according to music instruments. However, the result of the survey show that there was no difference in preference by gender, but there was some difference according to the division of music instruments. On this study, we reflected this result in the design, and proposed the design of an convenient outer garment for everyone to wear in the music performance band.

• 복식
• /
• 제64권8호
• /
• pp.83-96
• /
• 2014

This study aims to analyze the design of current nurse uniforms, investigate the state of nurse uniforms, and uniform design preferences in order to ultimately develop functional nurse uniform, which satisfy their needs. First, observing photos of nurses' campaign on wearing a badge showed that opening of top uniform almost always incorporated buttons, and sleeves were mostly set-in half sleeves while collars tended to be mandarin collars. The colors were mostly white for both top and bottom, while the top showed a bit more variety in colors. White tops often incorporated hospital logos on them. Second, in terms of the nurse uniform distribution, each nurse is given one top and one bottom per year. In addition, either a cardigan or a jacket on top of the regular summer uniform constitutes the winter uniform, whereas the availability of cardigans differed by hospitals. Third, the main source of contamination of uniforms was blood, and the level of satisfaction was all low in terms of the design, function, and material of the uniform, calling for the enhancement and development of new uniforms. Design preferences were two-piece with pants, color preferences were blue and pink, and pattern preferences were hospital logo, stripes, and check patterns in the listed order of preference. Complaints were usually made on the contamination of front pocket of the top, lack of sufficient pockets for storage, and tightness of the sleeves. Some preferences on finishing were the princess seams, mandarin collar, set-in half sleeves, and button closing on top. The preferred belt was a mixed form of straight-lined belt and rubber belt, and straight lined hem and spandex blended fabrics were favored for the clothing.

• 한국통신학회논문지
• /
• 제31권3A호
• /
• pp.321-327
• /
• 2006

본 논문은 접지된 유전체 평면 위에 균일한 저항율을 갖는 저항띠 격자구조로 임의의 방향으로 입사되는 H-분극 전자파산란 문제를 모멘트 법으로 해석하였다. 기존의 논문에서는 전류밀도의 분포에 따라 기저함수를 다양한 직교다항식으로 변경하여 I-분극의 경우만 수치해석 하였다. 반면에, 본 연구에서는 각 저항띠의 양끝에서 유도 전류밀도가 0 이 되도록 cosine 함수와 sine 함수로 구성된 다항식의 급수로 나타내었다. 산란 전자계는 주기적인 구조에 대응시킬 수 있는 Floquet 모드함수의 급수로 전재하였으며, 미지의 계수를 구하기 위하여 경계조건을 적용하였다. 또한, Fourier-Galerkin 모멘트 법을 적용함으로서 접지된 유전체 위에 여러 가지 저항율을 갖는 저항띠에 대하여 기하광학적인 정규화 된 반사전력에 관한 스트립 폭 및 주기, 입사각의 영향을 수치해석 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.792-794
• /
• 2003

AC loss is an important issue in the design of high-$T_c$ superconducting power cables which consist of a number of Bi-2223 tapes wound on a former. In the cables, the tapes have different critical currents intrinsically. And they are electrically connected to each other and current leads. In this work we have prepared a conductor composed of three Bi-2223 tapes with different critical currents. The critical current characteristics in the conductor have experimentally investigated. The results show that for uniform current distributions the conductor's critical current is proportional to the critical current of the Bi-2223 tape to which a voltage lead is attached. However it depends on the current non-uniformity parameter in the conductor rather than the tape's critical currents for nonuniform current distributions.

• 한국전산유체공학회지
• /
• 제12권3호
• /
• pp.20-28
• /
• 2007

A fast and robust method of grid generation to multiple functions has been developed for flow analysis in three dimensional space. It is based on the Non-Uniform Rational B-Spline(NURBS) of an approximation method. Many of NURBS intrinsic properties are introduced and much more easily understood. The grid generation method, details of numerical implementation. examples of application, and potential extensions of the current method are illustrated in this paper. The object of this study is to develop the surface grid generation and the grid cluster techniques capable of resolving complex flows with shock waves, expansion waves, shear layers. The knot insert method of Non-Uniform Rational B-Spline seems well worked. In addition, NURBS has been widely utilized to generate grids in the computational fluid dynamics community. Computational examples associated with practical configurations have shown the utilization of the algorithm.

• Journal of Electrical Engineering and Technology
• /
• 제6권5호
• /
• pp.640-646
• /
• 2011

The current study presents the design and performance of a novel 4/2 switched reluctance motor (SRM) for a high-speed air blower. With a comparative study of some rotor structures for a high-speed drive, a stepper-type rotor is optimized to produce a continuous torque and a low torque ripple. Rotor pole arc is modified to have a wide continuous output torque region, and air gap is determined to develop less torque ripple. The rotor radius is determined to reduce torque ripple with a reiterative FEM analysis. The designed rotor has three regions: short uniform, long uniform, and nonuniform air-gap region. The positive torque region is wider than a conventional 4/2 SRM without any torque dead zone. A prototype is tested and the efficiency is up to 72[%] at 30,000[rpm], 600[w] output.