• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.12
• /
• pp.705-712
• /
• 2003

In this paper, we propose new unified methodologies of reliability and its cost evaluation in power distribution systems. The unified method means that the proposed reliability approaches consider both conventional evaluation factor, i.e. sustained interruptions and additional ones, i.e. momentary interruptions and voltage sags. Because the three voltage quality phenomena generally originate from the outages on distribution systems, the basic and additional reliability indices are summarized considering the fault clearing mechanism. The proposed unified method is divided into the reliability evaluation for calculating the reliability indices and reliability cost evaluation for assessing the damage of customer. The analytic and probabilistic methodologies are presented for each unified reliability and its cost evaluation. The time sequential Monte Carlo technique is used for the probabilistic method. The proposed DVL(Demand Varying Load) model is added to the reliability cost evaluation substituting the average load model. The proposed methods are tested using the modified RBTS(Roy Billinton Test System) form and historical reliability data of KEPCO(Korea Electric Power Corporation) system. The daily load profile of the each customer type in domestic are gathered for the DVL model. Through the case studies, it is verified that the proposed methods can be effectively applied to the distribution systems for more detail reliability assessment than conventional approaches.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.5 no.3
• /
• pp.78-83
• /
• 1991

This study proposes a unified method to design toroidal transformer and its optimal design algorithm. This unified design method was derived from the fundamental equation of power on the basis of electromagnetic energy of a core and the definition of three parameters(K1, K2, KW) that influence the form of a core and the ratio of a core and coil. Accordingly this design method condenses the whole data for design of toroidal transformer to a standard variable which is the inner diameter of a core. The minimal cost, weight and volume values of the transformer were computed by means of the algorithm to search the optimal values of the parameters. Furthermore, through the CAD, the efficiency of this unified design method and optimal algorithm proposed in this paper was confirmed.

• Journal of Ship and Ocean Technology
• /
• v.7 no.2
• /
• pp.1-19
• /
• 2003

This paper introduces a unified theory for the radiation problem of adjacent multiple floating bodies. The particular case of interest is the multiple slender bodies that their centerlines are parallel. The infinite-and finite-depth unified theories for the single-body problem are extended to solve each sub-problem of multiple bodies. The present method is valid for deep water and moderate water depth, and applicable for individually floating bodies as well as multimaran-type vehicles. For the validation of the present method, the heave and pitch hydrodynamic coefficients for two adjacent ships are compared with the results of a three-dimensional method, and an excellent agreement is shown. The application includes the hydrodynamic coefficients and motion RAOs of four trimarans which have different longitudinal and transverse arrangements for sidehulls.

• Proceedings of the Safety Management and Science Conference
• /
• 2005.11a
• /
• pp.401-404
• /
• 2005

The ISO 'Guide to the Expression of Uncertainty in Measurement (GUH) establishes a unified method for evaluating uncertainty in measurement worldwide. This paper discusses the concepts and procedures of uncertainty evaluation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1000-1003
• /
• 1996

Nonlinear unified predictive control(UPC) algorithm was applied to the temperature control of a batch polymerization reactor for polymethylmethacrylate(PMMA). Before the polymerization reaction is initiated, the parameters of the process model are determined by the recursive least squares(RLS) method. During the reaction, nonlinearities due to generation of heat of reaction and variation of heat transfer coefficients are predicted through the nonlinear model developed. These nonlinearities are added to the process output from the linear process model. And then, the predicted process output is used to calculate the control output sequence. The performance of nonlinear control algorithm was verified by simulation and compared with that of the linear unified predictive control algorithm. In the experiment of a batch PMMA polymerization, nonlinear unified predictive control was implemented to regulate the temperature of the reactor, and the validity of the nonlinear model was verified through the experimental results. The performance of the nonlinear controller turned out to be superior to that of the linear controller for tracking abrupt changes in setpoint.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.7
• /
• pp.1293-1298
• /
• 2011

This paper presents an Unified Index which can evaluate a performance of a distribution system based on value-based methodology. Reliability cost and voltage sags cost are calculated for each load point using Reliability Sector Customer Damage Function(SCDF). Aging cost is calculated for each load point using Aging SCDF. Power loss cost and operation cost are calculated for the system. By summation of each cost of load point and system, power quality cost can be obtained. Finally, this paper developed an unified index which can show the performance of a distribution system. Presented method has been applied to a real system, the usefulness of the method has been verified.

• Journal of Power Electronics
• /
• v.19 no.2
• /
• pp.519-528
• /
• 2019

The unified power quality conditioner (UPQC) is an effective custom power device that is used at the point of common coupling to protect loads from voltage and current-related PQ issues. Currently, most researchers have studied series unit and parallel unit models and an idealized transformer model. However, the interactions of the series and parallel converters in AC-link are difficult to analyze. This study utilizes an equivalent transformer model to accomplish an electric connection of series and parallel converters in the AC-link and to establishes a precise unified mathematical model of the UPQC. The strong coupling interactions of series and parallel units are analyzed, and they show a remarkable dependence on the excitation impedance of transformers. Afterward, a feed-forward decoupling method based on a unified model that contains the uncertainty components of the load impedance is applied. Thus, this study presents an adaptive method to estimate load impedance. Furthermore, simulation and experimental results verify the accuracy of the proposed modeling and decoupling algorithm.

• Proceedings of the KIPE Conference
• /
• 1998.11a
• /
• pp.49-54
• /
• 1998

This paper describes a simulation model to analyze the dynamic performance of Unified Power Flow Controller, which adjust flexibly the active and reactive power flow through the ac transmission line. The basic operation was analyzed in detail using equivalent circuits and the design of control system was developed using vector control method. A simulation model with EMTP code was conceived to evaluate the performance of the Unified power Flow Controller. The simulation results show that the developed simulation model is very effective to analyze the dynamic performance of the Unified Power Flow Controller.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.8
• /
• pp.711-717
• /
• 2004

We propose a path planning method to improve the productivity of SMT (surface mount technology) inspection machines with an area camera. A unified method is newly proposed to determine the FOV clusters and camera sequence simultaneously. The proposed method is implemented by a hybrid genetic algorithm to increase the convergence speed. Comparative simulation results are then presented to verify the usefulness of the proposed algorithm.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.02a
• /
• pp.47-54
• /
• 2004

In order to meet the users demand, who needs faster and more accurate data in geographic information it is necessary to obtain and process the data more effectively. Now more effective data obtainment about geographic information is possible through the development of unified technology, which is applied to the field of geographic information, as well as through the development of hardware and software engineering. With the fast and precise correction and update, the development of unified technology can bring the reduction of the time and money. For the obtainment of geographic information which can meet the demand of the users, the unified technology has been applied to various fields, and in Aerial Photogrammetry field, many are doing researches actively for the GPS/INS unified system. To obtain fast and precise geographic information using Aerial Photogrammetry method, it is necessary to develop Airborne GPS/INS unified system, which makes GCP to the minimum. For this reason, this study has tried to develop a system which could unite and process both GPS and INS data. For this matter, code-processing module for DGPS and OTF initialization module, which can decide integer ambiguity even in motion, have been developed. And also, continuous kinematic carrier-processing module has been developed to calculate the location at the moment of filming. In addition, this study suggests a possibility of using a module, which can unite GPS and INS, using Kalman filtering, and also shows the INS navigation theory.