• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1681-1683
• /
• 1997

Linear induction accelerator devised for high current beam accelerating is divided into two types. In the first type, a unidirectional pulse is injected to an accelerating gap and in the second type, a bidirectional pulse is injected. The purpose of this paper is design and manufacture of bidirectional pulse generator for linear induction accelerator, where the pulse width for acceleration is more than 50[nsee] and the designed maximum charging voltage is more than 200[kV].

• Advances in materials Research
• /
• 제5권2호
• /
• pp.81-92
• /
• 2016

Stress concentration is an interesting and essential field of study, as it is the prime cause of failure of structural parts under static load. In the current paper, stress and strain concentration factors in unidirectional functionally graded (UDFGM) plate with central circular cutout are predicted by carrying out a finite element study on ANSYS APDL platform. The present study aims to bridge the lacuna in the understandings of stress analysis in perforated functionally graded plates. It is found that the material variation parameter is an important criterion while designing a perforated UDFGM plate. By selecting a proper material variation parameter and direction of material gradation, the stress and strain concentrations can be significantly reduced.

• Steel and Composite Structures
• /
• 제33권2호
• /
• pp.299-306
• /
• 2019

The natural fibre composites are termed as bio-composites. They have shown a promising replacement to the current carbon/glass fibre reinforced composites as environmental friendly materials in specific applications. Natural fibre reinforced composites are potential materials for various engineering applications in automobile, railways, building and Aerospace industry. The natural fibre selected to fabricate the composite material is plant-based fibre e.g., sisal fibre. Sisal fibre is a suitable reinforcement for use in composites on account of its low density, high specific strength, and high hardness. Epoxy is a thermosetting polymer which is used as a resin in natural fibre reinforced composites. Hand lay-up technique was used to fabricate the composites by reinforcing sisal fibres into the epoxy matrix. Composites were prepared with the unidirectional alignment of sisal fibres. Test specimens with different fibre orientations were prepared. The fabricated composites were tested for mechanical properties. Impact test, tensile test, flexural test, hardness test, compression test, and thermal test of composites had been conducted to assess its suitability in industrial applications. Scanning electron microscopy (SEM) test revealed the microstructural information of the fractured surface of composites.

• 한국군사과학기술학회지
• /
• 제9권3호
• /
• pp.88-94
• /
• 2006

In order to substitute current aluminum sabot and to increase the penetration performance of the kinetic energy projectiles, the research and development program for composites sabot has been conducted. For carbon/epoxy composites sabot, unidirectional carbon fiber reinforced epoxy prepreg was chosen and thick sectioned composites preforms with the different fiber angles along the circumferential direction of sabot were prepared by compression molding under the careful processing conditions at $150^{\circ}C$ for 1hour with $70kgf/cm^2$ curing pressure. The composites sabot demonstrated a weight reduction by approximately 30% than that of current aluminum sabot. The muzzle velocity of a kinetic energy projectile with composites sabot was measured to be about 63m/s higher than that with aluminum sabot. These results imply that the penetration performance is expected to be considerably increased when the composite sabot is applied to the kinetic energy projectiles.

• Ocean Systems Engineering
• /
• 제8권4호
• /
• pp.381-407
• /
• 2018

This paper presents a hybrid numerical approach, which combines a two-phase Navier-Stokes model (NS) and the fully nonlinear potential theory (FNPT), for modelling wave-structure interaction. The former governs the computational domain near the structure, where the viscous and turbulent effects are significant, and is solved by OpenFOAM/InterDyMFoam which utilising the finite volume method (FVM) with a Volume of Fluid (VOF) for the phase identification. The latter covers the rest of the domain, where the fluid may be considered as incompressible, inviscid and irrotational, and solved by using the Quasi Arbitrary Lagrangian-Eulerian finite element method (QALE-FEM). These two models are weakly coupled using a zonal (spatially hierarchical) approach. Considering the inconsistence of the solutions at the boundaries between two different sub-domains governed by two fundamentally different models, a relaxation (transitional) zone is introduced, where the velocity, pressure and surface elevations are taken as the weighted summation of the solutions by two models. In order to tackle the challenges associated and maximise the computational efficiency, further developments of the QALE-FEM have been made. These include the derivation of an arbitrary Lagrangian-Eulerian FNPT and application of a robust gradient calculation scheme for estimating the velocity. The present hybrid model is applied to the numerical simulation of a fixed horizontal cylinder subjected to a unidirectional wave with or without following current. The convergence property, the optimisation of the relaxation zone, the accuracy and the computational efficiency are discussed. Although the idea of the weakly coupling using the zonal approach is not new, the present hybrid model is the first one to couple the QALE-FEM with OpenFOAM solver and/or to be applied to numerical simulate the wave-structure interaction with presence of current.

• 한국해안·해양공학회논문집
• /
• 제23권1호
• /
• pp.118-125
• /
• 2011

지반의 수리저항 특성을 측정하기 위하여 사용되어 온 세굴실험기(EFA)를 개선하여 조류의 흐름방향이 바뀌는 것을 고려할 수 있도록 하였다. 개선된 세굴실험기를 이용하여 인공적으로 조성된 세립질 및 조립질 시료에 대하여 일방향 흐름과 왕복류 흐름을 고려한 수리저항성능 실험을 실시하였고 수리저항 특성을 정량적으로 비교하였다. 실험결과 세립질 및 조립질 시료 모두에서 일방향 흐름보다 왕복류를 고려한 양방향 흐름에서 세굴률이 크게 발생 하는 것으로 나타났다. 또한 세굴률의 증가는 조립질 시료가 더 크게 나타났으며 전 유속에 대한 평균 세굴률을 비교한 결과 상재압력이 큰 쪽이 더 큰 것으로 나타나 해저표면으로부터 상대적으로 깊은 곳에서 양방향 흐름에 대한 고려가 필요한 것으로 나타났다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.382-384
• /
• 2013

LED는 일반 백열등에 비해 훨씬 밝으면서도 저전력이라는 장점을 지니고 있다. 이에 기존 형광등이 지니는 효율적, 환경적 문제점을 개선하기 위해 LED형광등의 개발과 상용화가 이루어 졌다. LED는 형광등과 달리 극성을 지니는 단방향성 소자로 교류전원을 직접 쓸 수 없기 때문에 전원공급장치를 필요로 한다. 이 전원공급장치는 부피가 크고 가격이 비싸기 때문에 유지비용면에서 일반 형광등에 비해 기능성이 떨어진다. 본 연구에서는 이 전원공급장치를 대신하여 간략하게 AC전원을 정류하고, 전압변동에 따른 전류변화로 인한 빛의 밝기가 변하는 현상을 없애기 위해 정전류로 제어할 수 있는 회로를 구성하고 이를 LED모듈과 구분하여 Plug in/out 방식의 교체형 모듈로 구성하여 유지보수에 있어 저렴하고 손쉬운 교체가 가능한 소자개발방법을 제안하고자 한다.

• 한국재료학회지
• /
• 제9권11호
• /
• pp.1112-1116
• /
• 1999

$\textrm{Bi}_{2}\textrm{Te}_{3}$의 고/액 계면을 통하여 전류밀도와 방향을 달리 하면서 통전시켰을 때 발생하는 고상, 액상 및 고/액 계면에서의 미소 온도변화를 측정하였다. 이 냉각(가열) 효과는 전류밀도, 통전방향 및 시간에 따라 다르게 나타났으며, 온도변화에 미치는 Peltier 열, Thomson 열 및 Joule 열의 영향을 이론 및 실험에 의해 각각 분류하였다. $\textrm{Bi}_{2}\textrm{Te}_{3}$의 고/액상간의 Peltier 계수는 -1.10$\times\textrm{10}^{-1}$V이었으며, 고상과 액상의 Thomson 계수는 각각 7.31\times\textrm{10}^{-4}V/K와 5.77\times\textrm{10}^{-5}V/K이었다. 직류를 통전하면서 Bi$_2$Te$_3$결정을 성장한 결과, 고상에서 액상으로 통전한 경우, Peltier 냉각에 의한 온도구배의 상승으로 방향성이 향상된 결정을 얻을 수 있었지만, 전류의 방향을 반대로 하면, 결정성 향상에 별 도움을 주지 못하였다.

• Asian Journal of Business Environment
• /
• 제9권2호
• /
• pp.27-34
• /
• 2019

Purpose - From the advanced path of development and current situation, the development of enterprises plays a tremendous role in promoting national economic growth and raising the overall national strength. Therefore, this paper aims at examining the mutual effect between small & medium enterprises and economic growth. Research design, data, and methodology - In order to address the operating mutual effect between the small & medium enterprises and economic growth more clearly, this paper sets Alibaba Group and Hangzhou as an example. Meanwhile, the annual data from 2000 to 2017 will be employed, and an empirical analysis will be performed under the vector error correction model. Results - The findings display that the total revenue of Alibaba Group has a positive effect on economic growth in city of Hangzhou. However, the Granger Causality test implies that there is only a unidirectional causality between total revenue of Alibaba Group and economic growth in Hangzhou. More specifically, 1% increase in total revenue of Alibaba Group can result in 0.272% in economic growth of Hangzhou in the long run. Conclusions - In summary, for the long run, the local governments should promulgate a series of policies to assist the small & medium enterprises like Alibaba Group to improve the local economic growth as seen in the city of Hangzhou.

• 대한치과보철학회지
• /
• 제40권5호
• /
• pp.429-440
• /
• 2002

Current dental restorations present a relatively weak resistance to fracture. Owing to their unique mechanical properties, fibre-reinforced polymers are now being considered. Unidirectional or woven continuous fibres, made of glass, polyethylene, carbon or Kevlar, have been evaluated. This study focused on the use of glass fibre knitted fabrics to reinforce acrylate resins, in order to investigate the possibility to construct single crowns as well as three unit bridges. Some points affecting the final composite system were tested ; 1) static strength, with focus on the stress transfer under a occlusal contact point ; 2) modelling of a three nit bridge ; 3) fatigue strength as a posterior three unit bridge material. The study demonstrated that knitted fabric reinforcements are showing an interesting compromise between stiffness, static strength for single crown. For three unit bridge applications in the posterior arch, however knitted glass fabric reinforcements were not strong enough in fatigue An additional reinforcement in the posterior arch fixed partial denture design was recommended.