Browse > Article
http://dx.doi.org/10.12989/amr.2016.5.2.081

Stress and strain analysis of functionally graded plates with circular cutout  

Dhiraj, Vikash Singh (Department of Mechanical Engineering, MPSTME, SVKM's NMIMS Shirpur Campus)
Jadvani, Nandit (Department of Mechanical Engineering, MPSTME, SVKM's NMIMS Shirpur Campus)
Kalita, Kanak (Department of Mechanical Engineering, MPSTME, SVKM's NMIMS Shirpur Campus)
Publication Information
Advances in materials Research / v.5, no.2, 2016 , pp. 81-92 More about this Journal
Abstract
Stress concentration is an interesting and essential field of study, as it is the prime cause of failure of structural parts under static load. In the current paper, stress and strain concentration factors in unidirectional functionally graded (UDFGM) plate with central circular cutout are predicted by carrying out a finite element study on ANSYS APDL platform. The present study aims to bridge the lacuna in the understandings of stress analysis in perforated functionally graded plates. It is found that the material variation parameter is an important criterion while designing a perforated UDFGM plate. By selecting a proper material variation parameter and direction of material gradation, the stress and strain concentrations can be significantly reduced.
Keywords
FGM; stress concentration; FEM simulation; circular cut-out; perforated plate;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Sburlati, R., Atashipour, S.R. and Atashipour, S.A. (2014), "Reduction of the stress concentration factor in a homogeneous panel with hole by using a functionally graded layer", Compos. Part B: Eng., 61, 99-109.   DOI
2 Shao, Z., Ang, K., Reddy, J. and Wang, T. (2008), "Nonaxisymmetric thermomechanical analysis of functionally graded hollow cylinders", J. Therm. Stresses, 31(6), 515-536.   DOI
3 Shen, H.S. and Noda, N. (2007), "Postbuckling of pressure-loaded FGM hybrid cylindrical shells in thermal environments", Compos. Struct., 77(4), 546-560.   DOI
4 Shokrolahi-Zadeh, B. and Shodja, H. (2008), "Spectral equivalent inclusion method: anisotropic cylindrical multi-inhomogeneities", J. Mech. Phys. Solids, 56(12), 3565-3575.   DOI
5 Singh, B., Rokne, J. and Dhaliwal, R. (2008), "Vibrations of a solid sphere or shell of functionally graded materials", Eur. J. Mech.-A/Solids, 27(3), 460-468.   DOI
6 Wang, B., Mai, Y.W. and Zhang, X. (2005), "Functionally graded materials under severe thermal environments", J. Am. Ceramic Soc., 88(3), 683-690.   DOI
7 Watari, F. (1997), "Elemental mapping of functionally graded dental implant in biocompatibility test", Functionally Graded Mater., 1996, 749-754.
8 Yang, Q., Gao, C.F. and Chen, W. (2010), "Stress analysis of a functional graded material plate with a circular hole", Arch. Appl. Mech., 80(8), 895-907.   DOI
9 Yang, Z., Kim, C.B., Cho, C. and Beom, H.G. (2008), "The concentration of stress and strain in finite thickness elastic plate containing a circular hole", Int. J. Solid. Struct., 45(3), 713-731.   DOI
10 Zhang, Z., Paulino, G.H. and Celes, W. (2008), "Cohesive modeling of dynamic crack growth in homogeneous and functionally graded materials", Multiscale Funct. Grad. Mater, 973, 562-567.
11 Dag, S., Ilhan, K. and Erdogan, F. (2008), "Mixed-mode stress intensity factors for an embedded crack in an orthotropic FGM coating", Multiscale and functionally graded materials 2006:(M\&FGM 2006), 973, 16-21.
12 Darwish, F., Gharaibeh, M. and Tashtoush, G. (2012), "A modified equation for the stress concentration factor in countersunk holes", Eur. J. Mech.-A/Solids, 36, 94-103.   DOI
13 Zhong, Z. and Cheng, Z. (2008), "Fracture analysis of a functionally graded strip with arbitrary distributed material properties", Int. J. Solid. Struct., 45(13), 3711-3725.   DOI
14 Carroll, J., Adams, D.P., Maguire, M.C., Bishop, J.E., Reedlunn, B., Song, B., . . . others. (2015), "Variability in mechanical properties of laser engineered net shaping material. Tech. rep., Sandia national laboratories (SNL-NM), Albuquerque, NM (United States); Sandia National Laboratories, Livermore, CA.
15 Yamanouchi, M. and Koizumi, M. (1991), Functionally gradient materials.
16 Young, W.C. and Budynas, R.G. (2002), Roark's formulas for stress and strain (Vol. 7), McGraw-Hill New York.
17 Nemat-Alla, M. (2003), "Reduction of thermal stresses by developing two-dimensional functionally graded materials", Int. J. Solid. Struct., 40(26), 7339-7356.   DOI
18 Kim, J.H. and Amit, K. (2008), "A generalized interaction integral method for the evaluation of the T-stress in orthotropic functionally graded materials under thermal loading", J. Appl. Mech., 75(5), 051112.   DOI
19 Kumar, A., Agrawal, A., Ghadai, R. and Kalita, K. (2016), "Analysis of stress concentration in orthotropic laminates", Procedia Tech., 23, 156-162.   DOI
20 Li, Y.D. and Lee, K.Y. (2008), "Fracture analysis of a weak-discontinuous interface in a symmetrical functionally gradient composite strip loaded by anti-plane impact", Arch. Appl. Mech., 78(11), 855-866.   DOI
21 Oonishi, H., Noda, T., Ito, S., Kohda, A., Ishimaru, H., Yamamoto, M. and Tsuji, E. (1994), "Effect of hydroxyapatite coating on bone growth into porous titanium alloy implants under loaded conditions", J. Appl. Biomater., 5(1), 23-37.   DOI
22 Saini, P.K. and Kushwaha, M. (2014), "Stress variation around a circular hole in functionally graded plate under bending", Int. J. Mech., Aerospace, Ind. Mechatronics Eng., 8(3), 536-540.
23 Sburlati, R. (2013), "Stress concentration factor due to a functionally graded ring around a hole in an isotropic plate", Int. J. Solid. Struct., 50(22), 3649-3658.   DOI
24 Enab, T.A. (2014), "Stress concentration analysis in functionally graded plates with elliptic holes under biaxial loadings", Ain Shams Eng. J., 5(3), 839-850.   DOI
25 Ding, S.H. and Li, X. (2008), "Anti-plane problem of periodic interface cracks in a functionally graded coating-substrate structure", Int. J. Fract., 153(1), 53-62.   DOI
26 Durejko, T., Zi{\k{e}}tala, M., Polkowski, W. and Czujko, T. (2014), "Thin wall tubes with Fe 3 Al/SS316L graded structure obtained by using laser engineered net shaping technology", Mater. Des., 63, 766-774.   DOI
27 Enab, T.A. (2012), "A comparative study of the performance of metallic and FGM tibia tray components in total knee replacement joints", Comput. Mater. Sci., 53(1), 94-100.   DOI
28 Kalita, K. and Halder, S. (2014), "Static analysis of transversely loaded isotropic and orthotropic plates with central cutout", J. Inst. Eng. (India): Series C, 95(4), 347-358.   DOI
29 Kalita, K., Shinde, D. and Thomas, T.T. (2015), "Non-dimensional stress analysis of an orthotropic plate", Mater. Today: Proc., 2(4), 3527-3533.   DOI