• 정보처리학회논문지C
• /
• 제9C권6호
• /
• pp.935-944
• /
• 2002

이동 애드 혹(Ad hoc)네트워크란 노드의 이동에 따라 시시각각 변하는 무선 링크로 연결되어진 여러 개의 단말기들로 구성된 있는 자치분산 네트워크를 의미한다. 지금 까지 이동 ad hoc 네트워크에서의 통신은 Voice(음성)와 Data(데이터)통신을 제공하는 Best effort(최선형)서비스를 제공하는 라우팅 프로토콜만이 고려되어왔기 때문에 이동 네트워크를 사용하는 사용자가 많은 양의 자원을 차지하는 VOD(Video On Demand)와 같은 멀티미디어 Data를 보다 빠르고 정확하고 신속하게 전송하기 위해서는 기존의 Best effort 방식으로 전송되는 라우팅 프로토콜에는 많은 한계가 있었다(1). 따라서 본 논문에서는 성능평가를 위해 단방향 환경 하에서의 QoS(Qualify of Service)를 고려한 제안한 알고리즘을 적용하였다. 성능평가 카네기 멜론 과 버클리대학에서 만든 Ns-2를 사용하여 최선형 서비스(Best Effort)와 비교하여 QoS 서비스의 수신율 상승과 평균 경로설정 시간의 감소, 네트워크 부하 감소를 얻을수 있었다.

• 한국해안해양공학회지
• /
• 제17권3호
• /
• pp.202-212
• /
• 2005

수중 천퇴 인근에 해양구조물을 설치하는 경우, 구조물에 작용하는 설계하중을 구하기 위하여 파고뿐만 아니라 천퇴 주변 파랑변형에 의하여 이차적으로 발생된 파랑류를 아울러 고려하여야 한다. 본 연구에서는 천퇴 주변의 파랑변형과 파랑류를 계산하기 위하여 비선형 Boussinesq방정식 모델과 선형 완경사방정식 모델을 각각 적용하였다. 대상 천퇴는 Vincent and Briggs(1989)의 수리실험에서와 동일하며 실험조건은 규칙파, 일방향 또는 다방향 불규칙파 입사를 포함하는 비쇄파조건으로 하였다. 두 수치모델은 공히 천퇴 중심선을 따라 파랑류가 대칭적으로 형성됨을 잘 보여주었다. 그리고 수리실험에서의 파고계측선을 따라 계산된 파고변화는 전체적으로 실험 결과와 잘 일치하였다.

• 한국해안해양공학회지
• /
• 제12권4호
• /
• pp.168-180
• /
• 2000

In the Part I, the three dimensional model testing with NNW deep water wave direction gave the results such that the occurrence of breaking waves over the peak of Ear-Do caused very small wave height at the structure position. But the measured wave forces were rather greater than the calculated forces based on deep water wave height. Furthermore, It was also perceived that the time series of the forces looked like corresponding to the case that waves were superimposed by an unidirectional current. In the present Part II, the current is presumed to be a flow secondly induced by breaking waves, and an extensive study to clarify the current in a quantitative sense is performed through numerical analysis and hydraulic experiment. The results showed that a strong circulation can surely occur in the vicinity of the structure due to radiation stress differentials given by the breaking waves. It was also recognized that the velocity of the induced current varied with the magnitude of energy dissipation rate introduced in the numerical analysis. The numerical analysis was tuned adjusting the dissipation rate so that the calculated wave field could closely match with the experimental results of Part I. The fluid force (in prototype) for the optimal match showed approximately 2.2% increased over the calculated value based on the deep water wave height (24.6m) whereas the force corresponding to the average of the experimental values showed the increase of about 13.0%.

• 한국전기전자재료학회논문지
• /
• 제31권2호
• /
• pp.90-93
• /
• 2018

This aim of this study was to develop a process for creating bulk single-crystal YBaCuO superconductors in a high magnetic field. To support the bulk unidirectional growth of $YBa_2Cu_3O_{7-y}$, $SmBa_2Cu_3O_{7-y}$ seeds were planted inside YBaCuO composites and samples were produced by melting, enabling the growth of two YBaCuO superconductors. Due to the magnetism generated inside the superconductor of the upper sample, the magnetization inside the superconducting single crystals was evenly distributed, the sharpness of the induced magnetic force was improved, and the superconducting magnetization were significantly improved. This approach is widely applicable for the production of superconducting wires and current leads used for DC power breakers.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.166-171
• /
• 2007

The characterization of monolithic SiC and SiCf/SiC composite materials fabricated by NITE and RS processes was investigated in conjunction with the detailed analysis of their microstructure and density. The NITE-SiC based materials were fabricated, using a SiC powder with average size of 30 nm. RS- SiCf/SiC composites were fabricated with a complex slurry of C and SiC powder. In the RS process, the average size of starting SiC particle and the blending ratio of C/SiC powder were $0.4\;{\mu}m$ and 0.4, respectively. The reinforcing materials for /SiC composites were BN-SiC coated Hi-Nicalon SiC fiber, unidirectional or plain woven Tyranno SA SiC fiber. The characterization of all materials was examined by the means of SEM, EDS and three point bending test. The density of NITE-SiCf/SiC composite increased with increasing the pressure holding time. RS-SiCf/SiC composites represented a great decrease of flexural strength at the temperature of $1000\;^{\circ}C.$

• 한국컴퓨터정보학회논문지
• /
• 제23권7호
• /
• pp.49-56
• /
• 2018

Virtual object weight perception is an important topic, as it heightens the believability of object manipulation in immersive virtual environments. Although weight perception can be achieved using haptic interfaces, their technical complexity makes them difficult to apply in immersive virtual environments. In this study, we present a visual pseudo-haptic feedback system that simulates and depicts the weights of virtual objects, the effect of which is weight perception. The proposed method recognizes grasping and manipulating hand motions using computer vision-based tracking methods, visualizing a Force Arrow to indicate the current lifting forces and its difference from the standard lifting force. With the proposed Force Arrow method, a user can more accurately perceive the logical and unidirectional weight and therefore control the force used to lift a virtual object. In this paper, we investigate the potential of the proposed method in discriminating between different weights of virtual objects.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.68-70
• /
• 2002

Prediction of 3-D permeability tensor for multi-axial preform is critical to model and design the manufacturing process of composites by considering resin flow through the multi-axial fiber structure. In this study, the in-plane and transverse permeabilities for braided preform are predicted numerically. The flow analyses are calculated by using 3-D CVFEM(control volume finite element method) for macro-unit cells. To avoid checker-board pressure field and improve the efficiency of numerical computation, a new interpolation function for velocity is proposed on the basis of analytic solutions. Permeability of a braided preform is measured through unidirectional flow experiment and compared with the permeability calculated numerically. Unlike other studies, the current study is based on more realistic unit cell and prediction of permeability is improved.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.943-946
• /
• 1997

Electropolishing is the controlled electrochemical removal of surface metal, resultmg in a brilliant appearance andimproved properties. Sometimes described as "reverse plating," the process has a leveling effect, which produces smoothnessand increased reflectivity. Unlike conventional mechanical finishing systems, the electropolishing does not smear, bend,stress or fracture the crystalline metal surface to achieve smoothness. Instead, electropolishing removes metal from thesurface producing a unidirectional pattern that is stress-free, microscopically smooth and often highly reflective. In addition,improved corrosion resistance and passivity are achieved on many ferrous and some non-ferrous alloys. Pure aluminium doesnot electropolish well, if at all, but most other alloys of aluminum electropolish excellently.Therefore, the aim of this study is to determine the characteristics of electropolishing aluminium alloy in term of currentdensity, machining time, temperature, electrode gap and workpiece surface measurementkpiece surface measurement

• 한국컴퓨터산업학회논문지
• /
• 제2권9호
• /
• pp.1209-1218
• /
• 2001

본 논문은 이동 Ad Hoc 망 라우팅 프로토콜 중, 비대칭 경로를 지원하는 동적 소스 라우팅 프로토콜에 관한 연구이다. 기존의 동적 소스 라우팅 프로토콜은 양방향 경로만을 사용하도록 구현되어있다. 그러나 실제적인 무선환경에서는 단말의 비대칭성이나 무선환경 특성 등에 기인한 단방향 링크가 존재할 수 있다. 따라서 본 논문에서는 좀 더 일반적인 무선환경에 맞는 이동 Ad Hoc 망 라우팅 프로토콜을 구현하기 위하여 비대칭 경로를 지원하도록 하였다. 특히 이동성으로 인한 경로 실패를 인식한 경우, 신속한 경로 재설정을 수행하기 위해 개선된 다중경로유지 기법을 사용하였다.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.695-703
• /
• 2016

A fuel cell power conditioning system for online diagnosis and load leveling under the condition of varying load is developed in this study. The proposed system comprises a unidirectional boost converter and a bidirectional buck-boost converter with a battery. The system operates in two different modes. In normal mode, the bidirectional converter is utilized for load leveling; in diagnostic mode, it is utilized to control load voltage while the boost converter generates perturbation current to implement the online diagnosis function through in-situ electrochemical impedance spectroscopy (EIS). The proposed method can perform EIS for a fuel cell under varying-load conditions with no influence on the load. The validity and feasibility of the proposed system are verified by experiments, and the design procedure of the proposed system is detailed.