• Journal of Korean Society for Quality Management
• /
• v.21 no.1
• /
• pp.190-198
• /
• 1993

A multiple criteria model for the facility layout problem considers both of the quantitative, the cost of the work flow, and qualitative, the closeness rating score, aspect. Rosenblatt, Fortenberry & Cox and Urban have developed multiple criteria models that consider both of the quantitative and qualitative aspect. Fortenberry & Cox's multiplicity model penalizes facilities with undesirable closeness rating and high work flows more than those undesirable closeness rating and low work flow between them to contribute to the objective function regardless of the closeness rating between these facilities. In this paper, it is intended to develops a improved multiple-criteria facility layout model considering the function for maintaning the distance between facilities.

• Korean Journal of Agricultural Science
• /
• v.17 no.1
• /
• pp.18-25
• /
• 1990

The above results indicate that vegetable crop production using vinyl houses continously increases. However, technical support and facility improvement are still insufficent to establish a full production system. In order to improve the cultural environment in facilities for better vegetable culture, several facters should be considered. 1. Facility design and arrangement should be made to improve micro-environments for crop growth and development because direction of facility and covering materials can affect the amount of light trasmitted into vinyl houses. 2. Cultivation of several leading varieties in each crop may not provide stable production and profit especially under undesirable environmental conditions. Thus, it is required to grow not only leading varieties but also other cultivars to decrease the economic losses. 3. Crops should be carefully managed when planted in early season not to experience low temperatures which induce growth retards. Early season cultivation requires proper selection of cultivars which are resistant to low temperture. 4. Active control of micro-environment in facilities should be made via improving the ventilation and irrigation systems.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.133-134
• /
• 2004

DUPIC (Direct Use of spent PWR fuel In CANDU) fuel cycle technology is being developed at Korea Atomic Energy Research Institute (KAERI). All the DUPIC fuel fabrication processes are remotely conducted in the completely shielded M6 hot-cell located in the Irradiated Material Examination Facility (IMEF) at KAERI. Undesirable products such as spent nuclear fuel powder debris and contaminated wastes are inevitably created during the DUPIC nuclear fuel fabrication processes.(omitted)

• Culinary science and hospitality research
• /
• v.4
• /
• pp.369-387
• /
• 1998

The atmosphere of foodservice facility is considered to be the total environment to which customers are exposed. Atmosphere is sometimes described as everything that makes an impression on people. On the other hand, mood is best described as the response of an individual to the various components that make up the atmosphere. Most people experience some type of reaction to the atmosphere that may be desirable or undesirable. If the individual response to the foofservice facility is favorable, the atmosphere has served to put that person into a good mood. In the highly competitive commercial restaurant field, the planning of the atmosphere for new facilities is going to be more important. The coming generation of potential customers is growing up in an environment that associates dining out with more than just good food. This study is characterized by the right atmosphere offerings. Thus, this study discusses the physical components affecting perception of atmosphere. Many of these components will be discussed in detail to show their relationship to the design of dining areas. This study identified the many physical components of atmosphere that can be manipulated and arrive at a combination that will give the desired sensations. With these backgrounds as a guide, this study presented alternatives which should not only provide atmosphere but should reach a satisfactory level of creating atmosphere from a practical standpoint. these is to maximise the perceptual effect, train the employees, and be reflected and be reflected the advertising and public relations.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.636-640
• /
• 2002

Acoustic coupled combustion instability, which is one of the most undesirable phenomena in the development of liquid propellant rocket engine, can cause serious damage to a rocket itself, and must be avoided by all means. Unfortunately, KSR-III rocket went through combustion instability during engine start at the propulsion test article No.2. To resolve the problem, time sequence (cyclogram) has been changed, and baffle system has been applied. In consequence of change, stable combustion was achieved.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.267-270
• /
• 2002

Combustion instability, which is one of the most undesirable phenomena in the development of liquid Propellant rocket engine, can cause serious damage to the rocket itself, and must be evaded by all means. Unfortunately, KSR-III rocket went through the combustion instability during engine start at the propulsion test article No.2. To resolve the problem, time sequence has been changed, and the baffle system has been applied. In consequence of the change, stable combustion was achieved.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.3
• /
• pp.170-180
• /
• 2017

This research analyzed the effect of a basic environmental facility siting on the difference in land prices using a case study of Jisan sewage disposal plant in Daegu metropolitan city. To do so, two buffer zones were generated around Jisan sewage disposal plant to 400m at an interval of 200m as a setback distance and 822 officially announced individual land prices were acquired from Korea Ministry of Land, Infrastructure and Transport(MOLIT). Paired samples t-test was performed to compare the mean difference in land prices before and after Jisan sewage disposal plant siting. Results show that the mean land price from each buffer zone was slightly increased after the siting and the difference was statistically significant. Also, the results indicate that the mean land price within 200m was lower than that between 200m and 400m before the siting while there was not different in the mean land price for both buffer zones after the siting. Because Jisan sewage disposal plant did not have a stench and a larger capacity and its surrounding areas were blended by commercial and residential uses, a sewage disposal plant siting had little effect on the fall in land prices unlike previous studies. The findings from this research will provide new reference data for local government and local people with conflicting views on the siting of a basic environmental facility.

• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.6
• /
• pp.605-615
• /
• 2017

Efficient simultaneous reduction conditions for $NO_x$ and $NH_3$-slip was investigated in SCR (Selective Catalytic Reduction) process with load variation by applying dual catalysts (SCR catalyst, $NH_3$ decomposition catalyst) system. $N_2O$ formation characteristics were analyzed to look into possible undesirable reaction pathways. In the experiments of catalyst characteristics, various operational variables were tested for the combined catalytic system, such as $NH_3/NO_x$ ratio, temperature, oxygen concentration and $H_2O$. The reaction characteristics of $NO_x$, $NH_3$ and $N_2O$ were analyzed and optimal conditions could be evaluated for the combustion facility with varied load. In terms of $NO_x/NH_3$ simultaneous reduction and $N_2O$ formation suppression, optimal condition was considered NSR 1.2 and temperature $300^{\circ}C$. At this operational condition, $NO_x$ conversion was 98%, $NH_3$ reduction efficiency was 95%, generated $N_2O$ concentration 9.5 ppm with inlet $NO_x$ concentration of 100 ppm. In $NH_3-SCR$ process with $NH_3$ decomposition catalyst, $NO_x$ and $NH_3$ can be considered to be reduced simultaneously at limited conditions. The results of this study may be utilized as basic data at facilities requiring simultaneous $NO_x$ and $NH_3$ reduction for facilities with load variation.

• Journal of Power System Engineering
• /
• v.2 no.2
• /
• pp.55-59
• /
• 1998

In practice, the property of nonlinearity is contained in all physical systems. In other word, all physical systems are nonlinear to some degree. Therefore it is important that we acquires a facility for analyzing feedback control systems with varying degrees of nonlinearity. To operate the system linearly over wide range of variation of signal amplitude and frequency, the system requires components of an extremely high quality. Such a system would probably be impractical in the view points of cost, space and weight. In this context of view, it is worth noting that the nonlinearities may be intentionally introduced into a system in order to compensate for the effects of other undesirable nonlinearities or to obtain better performance than what could be achieved using linear element only. A simple example of an intentional nonlinearity is the use of a nonlinear damped system to optimize response in accordance with the magnitude of error. In this paper, an on-off type nonlinear controller is introduced and the applicability and validity of a simple on-off controller are presented by the experimental result.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.9
• /
• pp.899-905
• /
• 2009

Most supersonic-flow test facility has axisymmetric nozzles or two-dimensional symmetric nozzles. Compared to these nozzles, a two-dimensional asymmetric nozzle has advantages of reducing low cost for various Mach number testing and undesirable flow structure such as shock wave reflection because the nozzle part can be directly connected to the test section part in this type of nozzle. The two-dimensional asymmetric nozzle, which was Mach number 2, was designed for supersonic combustion experiment. And it was verified with the numerical analysis and visualization of Mach wave. This study suggested the practical method for design and verification of supersonic two dimensional asymmetric nozzles.