• 제목/요약/키워드: Underwater position control

검색결과 91건 처리시간 0.022초

사용자 운용 편의성을 위한 수중로봇 MR-1의 수조실험에 관한 연구 (A Basic Study of Water Basin Experiment for Underwater Robot with Improving usability)

  • 남건석;류제두;하경남
    • 로봇학회논문지
    • /
    • 제15권1호
    • /
    • pp.32-38
    • /
    • 2020
  • This paper describes a method for tracking attitude and position of underwater robots. Underwater work with underwater robots is subject to differences in work efficiency depending on the skill of the operator and the utilization of additional sensors. Therefore, this study developed an underwater robot that can operate autonomously and maintain a certain attitude when working underwater to reduce difference of work efficiency. The developed underwater robot uses 8 thrusters to control 6 degrees of freedom motion, IMU (Inertial Measurement Unit), DVL (Doppler Velocity Log) and PS (Pressure Sensor) to measure attitude and position. In addition, the thruster allocation algorithm was designed to follow the control desired value using 8 thrusters, and the motion control experiments were performed in the engineering water basin using the thruster allocation method.

수평 꼬리 날개의 제어를 병행하는 하이브리드 수중 글라이더의 깊이 제어 (Depth Control of a Hybrid Underwater Glider in Parallel with Control of Horizontal Tail Wing)

  • 주문갑
    • 대한임베디드공학회논문지
    • /
    • 제14권1호
    • /
    • pp.25-31
    • /
    • 2019
  • An underwater glider is a type of autonomous unmanned vehicle and it advances using a vertical zig-zag glide. For this purpose, the position of an internal battery is regulated to control its attitude, and the amount of water in a buoyancy bag is regulated to control the depth. Underwater glider is suitable for a long-distance mission for a long time, because the required energy is much smaller than the conventional autonomous unmanned vehicle using propeller propulsion system. In this paper, control of horizontal tail wing is newly added to the conventional battery position and buoyancy control. The performance of the proposed controller is shown through Matlab simulation.

DWT/UKF를 이용한 수면 BEACON의 위치추정 (Estimated Position of Sea-Surface Beacon Using DWT/UKF)

  • 윤바다;윤하늘;최성희;이장명
    • 제어로봇시스템학회논문지
    • /
    • 제19권4호
    • /
    • pp.341-348
    • /
    • 2013
  • A location estimation algorithm based on the sea-surface beacon is proposed in this paper. The beacon is utilized to provide ultrasonic signals to the underwater vehicles around the beacon to estimate precise position of underwater vehicles (ROV, AUV, Diver robot), which is named as USBL (Ultra Short Baseline) system. It utilizes GPS and INS data for estimating its position and adopts DWT (Discrete Wavelet Transform) de-noising filter and UKF (Unscented KALMAN Filter) elaborating the position estimation. The beacon system aims at estimating the precise position of underwater vehicle by using USBL to receive the tracking signals. The most important one for the precise position estimation of underwater vehicle is estimating the position of the beacon system precisely. Since the beacon is on the sea-waves, the received GPS signals are noisy and unstable most of times. Therefore, the INS data (gyroscope sensor, accelerometer, magnetic compass) are obtained at the beacon on the sea-surface to compensate for the inaccuracy of the GPS data. The noises in the acceleration data from INS data are reduced by using DWT de-noising filter in this research. Finally the UKF localization system is proposed in this paper and the system performance is verified by real experiments.

리야푸노프 직접법에 의한 수중 글라이더의 깊이 제어 (Depth Control of Underwater Glider by Lyapunov's Direct Method)

  • 주문갑
    • 대한임베디드공학회논문지
    • /
    • 제12권2호
    • /
    • pp.105-112
    • /
    • 2017
  • To control the depth of an underwater glider, a control method by using Lyapunov's direct method is proposed. The underwater glider has a torpedo-shape hull, a movable mass in the hull, and an inflatable buoyancy bag in the hull, but doesn't have large wings that increase the lift force for the conventional underwater glider. The control laws to adjust the position of the movable mass and the mass of the inflatable buoyancy bag are derived. For a selected speed and an angle of attack, we simulated the operation of the underwater glider using Matlab/Simulink. The efficiency of the proposed controller is shown in the fact that the control effort is active during only a short period of time when the zigzag trajectory is changed from downward to upward or vice versa.

수중 구조물 검사로봇의 기구학적 관계를 이용한 확장 칼만 필터 기반의 위치추정 (Extended Kalman Filter-based Localization with Kinematic Relationship of Underwater Structure Inspection Robots)

  • 허영진;이기현;김진현
    • 제어로봇시스템학회논문지
    • /
    • 제19권4호
    • /
    • pp.372-378
    • /
    • 2013
  • In this paper, we research the localization problem of the crawler-type inspection robot for underwater structure which travels an outer wall of underwater structure. Since various factors of the underwater environment affect an encoder odometer, it is hard to localize robot itself using only on-board sensors. So in this research we used a depth sensor and an IMU to compensate odometer which has extreme error in the underwater environment through using Extended Kalman Filter(EKF) which is normally used in mobile robotics. To acquire valid measurements, we implemented precision sensor modeling after assuming specific situation that robot travels underwater structure. The depth sensor acquires a vertical position of robot and compensates one of the robot pose, and IMU is used to compensate a bearing. But horizontal position of robot can't be compensated by using only on-board sensors. So we proposed a localization algorithm which makes horizontal direction error bounded by using kinematics relationship. Also we implemented computer simulations and experiments in underwater environment to verify the algorithm performance.

ROV의 운동이 고려된 수중 로봇팔의 동적 작업공간 구동 제어 (Dynamic Workspace Control of Underwater Manipulator Considering ROV Motion)

  • 심형원;전봉환;이판묵
    • 제어로봇시스템학회논문지
    • /
    • 제17권5호
    • /
    • pp.460-470
    • /
    • 2011
  • This paper presents a dynamic workspace control method of underwater manipulator considering a floating ROV (Remotely Operated vehicle) motion caused by sea wave. This method is necessary for the underwater work required linear motion control of a manipulator's end-effector mounted on a floating ROV in undersea. In the proposed method, the motion of ROV is modeled as nonlinear first-order differential equation excluded dynamic elements. For online manipulator control achievement, we develop the position tracking method based on sensor data and EKF (Extended Kalman Filter) and the input velocity compensation method. The dynamic workspace control method is established by applying these methods to differential inverse kinematics solution. For verification of the proposed method, experimental data based test of ROV position tracking and simulation of the proposed control method are performed, which is based on the specification of the KORDI deep-sea ROV Hemire.

수중 선체에 장착된 로봇팔 궤적의 비귀환형 적응제어 (Non-regressor Based Adaptive Tracking Control of an Underwater Vehicle-mounted Manipulator)

  • 여준구
    • 한국해양공학회지
    • /
    • 제14권2호
    • /
    • pp.7-12
    • /
    • 2000
  • This paper presents a non-regressor based adaptive control scheme for the trajectory tracking of underwater vehicle-mounted manipulator systems(UVMS). The adaptive control system includes a class of unmodeled effects is applied to the trajectory control of an UVMS. The only information required to implement this scheme ios the upper bound and lowe bound of the system parameter matrices the upper bound of unmodeled effects the number of joints the position and attitude of the vehicle and trajectory commands. The adaptive control law estimates control gains defined by the combinations of the bounded constants of system parameter matrices and of a filtered error equation. To evaluate the performance of the non-regressor based adaptive controller computer simulation was performed with a two-link planar robot model mounted on an underwater vehicle. The hydrodynamic effects acting on the manipulator are included. It is assumed that the vehicle's motion is slow and can be predicted with a proper compensator.

  • PDF

공압 gripper를 적용한 해양 건설 ROV 시스템 개발 (Development of Offshore Construction ROV System applying Pneumatic Gripper)

  • 박지현;황요섭
    • 한국정보통신학회논문지
    • /
    • 제26권11호
    • /
    • pp.1697-1705
    • /
    • 2022
  • 대규모 해양 건설에 따른 해양 건설 작업자의 안전 및 해양 오염 문제가 발생하고 있다. 특히, 해양의 수중 건설 작업은 다른 작업에 비해 위험도가 높아 작업자의 안전을 고려한 무인 대체 시스템의 적용이 필요하다. 본 논문에서는 수중 무인 작업을 위해 해양 건설용 ROV 시스템을 개발 완료하였다. 수중 추진체의 제어를 통한 위치제어, 공압 gripper 그리고 수중 작업 모니터링을 위한 모니터링 시스템을 개발하였다. 성능평가 결과 ROV의 수중 이동속도는 최대 0.89m/s로 평가되었으며, 공압 gripper의 최대 하중은 80kg의 하중 허용 가능함을 확인하였다. 또한, 수중 ROV의 제어와 수중 영상 스트리밍에 필요한 네트워크 대역폭이 300Mbps 이상으로 평가되었으며, 유선 통신은 205m에서 92.7 ~ 95.0Mbit/s, 무선 통신은 78.3 ~ 84.8Mbit/s의 속도로 평가되었다.

자율무인잠수정의 수중 도킹을 위한 비쥬얼 서보 제어 알고리즘 (A Visual Servo Algorithm for Underwater Docking of an Autonomous Underwater Vehicle (AUV))

  • 이판묵;전봉환;이종무
    • 한국해양공학회지
    • /
    • 제17권1호
    • /
    • pp.1-7
    • /
    • 2003
  • Autonomous underwater vehicles (AUVs) are unmanned, underwater vessels that are used to investigate sea environments in the study of oceanography. Docking systems are required to increase the capability of the AUVs, to recharge the batteries, and to transmit data in real time for specific underwater works, such as repented jobs at sea bed. This paper presents a visual :em control system used to dock an AUV into an underwater station. A camera mounted at the now center of the AUV is used to guide the AUV into dock. To create the visual servo control system, this paper derives an optical flow model of a camera, where the projected motions of the image plane are described with the rotational and translational velocities of the AUV. This paper combines the optical flow equation of the camera with the AUVs equation of motion, and deriver a state equation for the visual servo AUV. Further, this paper proposes a discrete-time MIMO controller, minimizing a cost function. The control inputs of the AUV are automatically generated with the projected target position on the CCD plane of the camera and with the AUVs motion. To demonstrate the effectiveness of the modeling and the control law of the visual servo AUV simulations on docking the AUV to a target station are performed with the 6-dof nonlinear equations of REMUS AUV and a CCD camera.

수중항만공사용 로봇의 센서리스 유압 서보 시스템 개발 (Development of Sensorless Hydraulic Servo System for Underwater Harbor Construction)

  • 김태성;김치효;박근우;이민기
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 추계학술대회
    • /
    • pp.708-713
    • /
    • 2004
  • This research develops a sensorless hydraulic servo system of Parallel-Typed robot for harbour construction. Purpose of the robot is to mechanize the construction, which is accomplished through a joystick's operating by a stoneworker (or diver). The robot is attached on the end of an excavator as its attachment or transported by a crane to reach the desired place. The embedded compact controller is installed on the robot body and controlled by wireless telecommunication. For underwater work, it is necessary to waterproof the robot and its sensors. Especially, a sensor waterproof is a main drawback for the underwater robot. This leads us to develop a hydraulic robot position controller using an observer which gives the position information without any position sensor. We design a neural network to identify the displacement change according to the command voltage to servo valve. To verify the sensorless controller, this paper presents the performance of the sensorless control for which the position is given by the observer comparing with that of the sensor control for which the position is measured by LVDT sensors.

  • PDF