• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.5
• /
• pp.469-473
• /
• 2003

Transplantation of Sargassum horneri to natural substrate using the rope seeding method was undertaken. Seeding of S. horneri was grown on net in an indoor tank up to 0.2-0.3 cm in frond length for 2 months, and then transplanted to an architecture tile $(10\times10\;cm)$ with underwater glue and an iron pipe. After two months, number of S. horneri on the tile decreased because of grazing by herbivores. However, S. horneri on the iron pipe grew up to 0.5-2.0 cm in frond length. After 7 months, they rapidly grew up to a frond length of 11.0-203.0 cm with a mean frond length of 122.6 cm. S. horneri grew up to a maximum frond length of 313.0 cm, and mean frond length of 228.0 cm, after 10 months. The artificial S. hornevi beds can be used to clean the seawater and also be utilized as a source of marine biomass as well as for supplying habitat, shelter and spawning beds for fish and invertebrates.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.23
• /
• pp.78-97
• /
• 2007

SPM, which is an abbreviation of Single Point Mooring, also called as SBM(Single Buoy Mooring), is a special buoy besides the quays of the harbor for mooring ships, and is normally a 3m wide cone or cylinder shaped steel drum fixed underwater so it won't move, and is used for mooring cargo-work at outer port by laid-up ships and large crude oil carrier. The work of VLCC SPM mainly is accomplished on the open sea. On the open sea as a result of meteorological condition and the ocean wave influence, When the weather condition is get bed, peremptorily moving to the safety place, because of the gale and the billow, almost happened frequently, the pilot is unable to go on board and the tug is also unable to be used Now because of the bad weather the VLCC SPM moving to the other safety place frequently happened in the ulsan port. the construction of new harbor, it constructed many break water around SPM. So that it is necessary to propose the new standard about how to maneuvering area actually. The standard for handling ranges of the SPM operations was tested and verified by a simulation.. So that it is necessary to propose the new standard about how to maneuvering area actually.

• Fisheries and Aquatic Sciences
• /
• v.24 no.11
• /
• pp.341-350
• /
• 2021

The energy production of offshore wind farms plays an important role in expanding renewable energy. However, the development of offshore wind farms faces many challenges due to its incompatibility with marine environments and its social acceptability among the local community. In this study, we reviewed the marine environmental impact assessment status of offshore wind farm development projects for 2012-2019 in South Korea. A total of nine projects were selected for this study, all of which experienced considerable conflict with local fisheries resources. To appropriately respond to the underlying challenges faced by offshore wind farm development and in order to better support decision-making for future impact assessment, our findings identified: i) a need for adequate preliminary investigation and technical examination of fisheries resources; ii) a need to assess and estimate the impact of underwater noise, vibration, and electromagnetic waves on fisheries resources during wind farm construction and operation; and iii) a need for a bottom-up approach that allows for communication with local stakeholders and policy-makers to guarantee the local acceptability of the development.

• Ocean and Polar Research
• /
• v.45 no.2
• /
• pp.33-42
• /
• 2023

Dissolved oxygen (DO) is a crucial parameter for assessing environmental conditions in aquatic ecosystems. However, commercial in situ dataloggers for oxygen optodes can be relatively expensive and limited in their specifications. In this paper, we present a novel design for a DO datalogger system based on the control boards family with RP2040 MCU chipset. Our design includes two types of dataloggers: a simple logging system and a programmable system for sampling rates via magnetic switches underwater for divers. We provide detailed descriptions of the system, including the MicroPython source code and drawings to aid in construction. We also discuss the various applications of our DO datalogger system in monitoring dissolved oxygen concentration in coastal waters and assessing the benthic metabolism of aquatic ecosystems. Our DO datalogger system provides an affordable and flexible option for researchers to accurately monitor DO concentrations in aquatic environments, and thereby improve our understanding of these complex ecosystems.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.34-40
• /
• 2008

Underwater seismic refraction with advanced interpretation approaches makes important contributions to shallow marine exploration and geotechnical investigations in Australia's coastal areas. A series of case studies are presented to demonstrate the recent applications of continuous and static USR methods to river crossing and port infrastructure projects at various sites around Australia. In Sydney, static underwater seismic refraction (USR) with bottom-placed receivers and borehole seismic imaging assisted the development of improved geotechnical models that reduced construction risk for a tunnel crossing of the Lane Cove River. In Melbourne, combining conventional boomer reflection and continuous USR with near-bottom sources and receivers improved the definition of a buried, variably weathered basalt flow and assisted dredging assessment for navigation channel upgrades at Geelong Ports. Sand quality assessment with continuous USR and widely spaced borehole information assisted commercial decisions on available sand resources for the reclamation phase of development at the Port of Brisbane. Buried reefs and indurated layers occur in Australian coastal sediments with the characteristics of laterally limited, high velocity, cap layers within lower velocity materials. If these features are not recognised then significant error in depth determination to deeper refractors can occur. Application of advanced refraction inversion using wavefront eikonal tomography to continuous USR data obtained along the route of a proposed offshore pipeline near Fremantle allowed these layers and the underlying bedrock refractor to be accurately imaged. Static USR and the same interpretation approach was used to image the drowned granitic regolith beneath sediments and indurated layers in the northern area of Western Australia at a proposed new berthing site where deep piling was required. This allowed preferred piling sites to be identified, reducing overall pile lengths. USR can be expected to find increased application to shallow marine exploration and geotechnical investigations in Australia's coastal areas as economic growth continues and improved interpretation methods are developed.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_2
• /
• pp.1651-1669
• /
• 2023

Sea ice currently covers approximately 7% of the world's ocean area, primarily concentrated in polar and high-altitude regions, subject to seasonal and annual variations. It is very important to analyze the area and type classification of sea ice through time series monitoring because sea ice is formed in various types on a large spatial scale, and oil and gas exploration and other marine activities are rapidly increasing. Currently, research on the type and area of sea ice is being conducted based on high-resolution satellite images and field measurement data, but there is a limit to sea ice monitoring by acquiring field measurement data. High-resolution optical satellite images can visually detect and identify types of sea ice in a wide range and can compensate for gaps in sea ice monitoring using Geostationary Ocean Color Imager-II (GOCI-II), an ocean satellite with short time resolution. This study tried to find out the possibility of utilizing sea ice monitoring by training a rule-based machine learning model based on learning data produced using high-resolution optical satellite images and performing detection on GOCI-II images. Learning materials were extracted from Liaodong Bay in the Bohai Sea from 2021 to 2022, and a Random Forest (RF) model using GOCI-II was constructed to compare qualitative and quantitative with sea ice areas obtained from existing normalized difference snow index (NDSI) based and high-resolution satellite images. Unlike NDSI index-based results, which underestimated the sea ice area, this study detected relatively detailed sea ice areas and confirmed that sea ice can be classified by type, enabling sea ice monitoring. If the accuracy of the detection model is improved through the construction of continuous learning materials and influencing factors on sea ice formation in the future, it is expected that it can be used in the field of sea ice monitoring in high-altitude ocean areas.

• Journal of Environmental Science International
• /
• v.24 no.10
• /
• pp.1285-1307
• /
• 2015

We constructed marine forest to restore barren grounds which are expanding in the east coast of Korea using 2 methods of (1)seedlings transplantation method and (2)underwater floating ropes method. We transplanted 3 macroalgae species, Ecklonia cava, Undaria pinnatifida, and Saccharina. japonica to construct marine forest. Blade length of Undaria pinnatifida on underwater floating ropes was $56.70{\pm}8.69mm$ in April and grew $68.75{\pm}22.30mm$ in May and $70.75{\pm}14.36mm$ in July. Blade length of S. japonica was shown 97.95-143.00mm in April to June. Blade length of Ecklonia cava was $30.50{\pm}1.91mm$ in May, $41.55{\pm}1.84mm$ in August, $45.30{\pm}2.57mm$ in November, 2009 and $45.30{\pm}1.99mm$ in February, 2010. The survey on Dangsa area, Ulsan-city in January, 2009 found a total number of 15 algal species(1 brown algae, 14 red algae species) with the highest variety at 5m depth of A station and the lowest at 8m depth of A and B stations. The March survey showed a total of 24 species (1 green algae, 1 brown algae, 22 red algae species) with the highest variety of 11 at depths of 3m and 5m of B station and the lowest of 6 at 10m of B station. In May, total biomass was 3,755.4g (green algae 1.2g, brown algae 199.0g, red algae 3,555.2g). From January, 2009, we found that E. cava was dominant at the depths of 3m and 5m of A and B stations while Peyssonnelia capensis was dominant at the depth of 8m of A station. The 8m depth of B station was dominated by Acrosorium polyneurum. In May, Grateloupia lanceolata was dominant at 8m depth of A station while other depths were dominated by Phycodrys fimbriata. In June, the dominant species were G. lanceolata at the 3m depth, E. cava at the 5m and P. fimbriata at the depths of 8m and 10m of A station. Under B station, G. lanceolata was dominant at the depths of 3m and 5m while P. fimbriata was dominant at the depths of 8m and 10m.

• 한국해양학회지
• /
• v.26 no.1
• /
• pp.13-23
• /
• 1991

For the purpose of examining the depositional sedimentary environments in the Han River estuary and around the Kyunggi Bay posterior to the Han river's developments, a hydrological and sedimen-tological survey was carried out. According to the hydrological and sedimentological conditions, the studied area can be divided into 3 depositional sedimentary environments: Fluvial, Estuarine and coastal-Bay. Posterior to the Han river's developments, however, the alterations of hydrodynamic condition in the Han river have caused a substantial change of the sedimentary environments in the lower Han river and its estuary. That is, the contents of total suspended sediment anterior to the Developments decreased from 37mg/l (in the lower Han River) and 500-1750 mg/l (at the Kanghwa Bridge) to 18 mg/l and 208-1142 mg/l posterior to the developments. these changes seem to have caused the siltation near the sin-gok Underwater Dam. Thus the characters of the boundary condition between the fluvial and the estuarine environments have rapidly changed. It is considered that these changes result mainly from the construction of the two underwater dams for the maintenance of the water level of the Han river. As the estuary is a transition zone between land and sea, these changes in the Han River estuary might affect the sedimentary environments around the Kyunggi Bay. In order to verify the effects of these changes, it is necessary that a detailed survey be carried out around the Han River estuary including the Imjin and Yesong River estuaries.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_2
• /
• pp.1643-1652
• /
• 2022

Deposited Marine Debris(DMD) can negatively affect marine ecosystems, fishery resources, and maritime safety and is mainly detected by sonar sensors, lifting frames, and divers. Considering the limitation of cost and time, recent efforts are being made by integrating underwater images and artificial intelligence (AI). We conducted a comparative study of You Only Look Once Version 5 (YOLOv5) and You Only Look Once Version 7 (YOLOv7) models to detect DMD from underwater images for more accurate and efficient management of DMD. For the detection of the DMD objects such as glass, metal, fish traps, tires, wood, and plastic, the two models showed a performance of over 0.85 in terms of Mean Average Precision (mAP@0.5). A more objective evaluation and an improvement of the models are expected with the construction of an extensive image database.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.2
• /
• pp.175-181
• /
• 2017

The purpose of this study is evaluating the characteristics of tensile strength of UHPC and examining tensile performance of notched specimens by direct tensile test. For test variables, 120, 150, and 180MPa of target design standard strength were aimed at. With general water curing and $90^{\circ}C$ high temperature steam as curing conditions, the properties were reviewed. Overall, it was represented that the specimens of notch-type direct tensile strength concrete was effective in inducing central cracks compared with existing direct tension specimens. Through this, it was judged that data construction with high reliability was possible. Above all, in a graph of direct tensile strength and strain, in the case of steam curing at high temperature, there was great difference of initial tensile strength compared with water curing. As passing of ages, an aspect that the difference gradually decreased was shown. Maximum tensile strength was found to increase steadily with increasing age for all target design strengths in water curing, in the case of steam curing, the tendency to increase significantly due to the initial strength development effect at 7 days of age. The initial crack strength increases with age in case of underwater curing, in the case of steam curing, it was higher than that of water curing in 7 days, while the strength of 28 days was lowered. In this part, it is considered necessary to examine the arrangement condition of the steel fiber.