• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.164-170
• /
• 2016

The initial urban railway was only required to perform its role as means of transportation. As the time of staying in an underground platform was extended, it has been faced with the issues of environmental improvement as a living space. Therefore, the sliding automatic door, which is the basis of the screen door, is used widely for large distribution stores, hospitals, restaurants, and public offices for customers' convenience and as a convenient method to control access. Therefore, screen doors are required for the purpose of customers' convenience, securing safety, establishing pleasant station buildings, and energy savings. It would be also necessary to develop the optimal design technology for a screen door system through the design of element parts and to ensure reliability. Therefore, this paper calculated, interpreted, and verified the theoretical weight of the composition parts to verify the design drive hardness of the motor for screen doors necessary for the safety of subways.

• The Plant Pathology Journal
• /
• v.21 no.4
• /
• pp.317-321
• /
• 2005

Since 2000 severe rots on aerial and underground parts of paprika (Capsicum annum L.) has occurred in most surveyed glasshouses throughout the country. A total of 56 isolates of a fungus were consistently isolated from various plant parts such as fruit, stem, branch, and root collected from 16 farms in five provinces. Anamorph stage of the fungus was identified as Fusarium solani based on its morphological characteristics. However, the fungus readily produced a sexual structure of perithecia on infected plant tissues and on agar media. Since the fungus formed abundant perithecium by a single isolate, it was considered as a homothallic strain of Nectria haematococca, the teleomorph of F. solani. Irregularly globose perithecia with orange to red color formed sparsely to gregariously on dead tissues of fruits and basal stems at the late infection stage, which is a diagnostic sign for the disease. Perithecia ranged from 125 to 220 ${\mu}m$ in diameter varied among isolates. Asci enveloping eight ascospores were cylindrical and measured 60-80x8-12 ${\mu}m$. Ellipsoid to obovate ascospores are two-celled and measured 11-18x4-7 ${\mu}m$. Ascospores were hyaline, slightly constricted at the central septum, and revealed longitudinal striations that is characteristic of the species. This fungus that has never been reported in Korea has previously become a threat to paprika cultivation because of its strong pathogenicity and nationwide distribution.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.53-60
• /
• 2021

High voltage CV cables have been widely installed underground due to their convenience and urban aesthetics. However, cable accidents have occurred frequently owing to poor construction and natural degradations. This paper proposes the method to measure the multi parameter measurement for optimum diagnostics of high voltage cable connection parts and verifies its technical usefulness. This measurement is intended to diagnose degradations of cable connection parts by using simultaneous vibration and thermography as well as partial discharge(PD). The experiment in a shielded laboratory was carried out to verify the usefulness of the multi parameter measurement. The experiment defined the degradation of the cable connection part as 12 types, and produced each degradation sample. As a result of experiment, it was possible to check the correlation of vibration signals with regard to progress in some defects. In the case of thermography, the coherence with regard to the progress of some defects was found. We figure that the proposed method would be useful also in the noise environment.

• Tunnel and Underground Space
• /
• v.33 no.5
• /
• pp.339-347
• /
• 2023

As the jacks provide a thrust force on the inclined surface, bending deformations by a side force occur in the pedestal and rod parts. This can induce disorder or degradation of the thrust module, buckling stability on the inclined compression condition should be clarified to secure the reliability of shield TBM. For analyzing the stability, a buckling testing method for hydraulic cylinder was investigated and compression testing system was installed. Before the test, a numerical analysis was conducted to check the stress concentration parts. The maximum allowable force was loaded on the cylinder specimen at 0 degree surface condition as a preliminary test. After the test, plastic deformations or hydraulic leakage was not observed. The static stability of it was verified at 0 degree condition.

• Korean Journal of Soil Science and Fertilizer
• /
• v.26 no.1
• /
• pp.10-19
• /
• 1993

This study reports the influence of nitrogen application on the yield and the accumulation of $NO_3{^-}$ in edible parts of major vegetables in a pot experiment treated with five levels(0, 1, 2, 4, 8g N/pot) of nitrogen. In the $NO_3{^-}$ accumulation of chinese cabbage the outer leaf were superior to the inner leaf. The $NO_3{^-}$ contents of the midrib in outer and inner leaf were higher than those of the leaf blade. By increasing the nitrogen application, the accumulationsgap in $NO_3{^-}$ accumulation between midrib and leaf blade in a leaf, became larger. The difference ratio of $NO_3{^-}$ accumulation in the outer leaf reached 4.8:1 at 8g N/pot treatment. In theradish, the $NO_3{^-}$ accumulation in the aerial root parts is higher than those of the underground root parts, and it is higher in the leaf than in the petiole. The accumulation of $NO_3{^-}$ in sarcocarp of cucumber was increased along with the added amount of nitrogen, but contents of $NO_3{^-}$ in the core of the cucumber showed no differences in the treatment levels. The $NO_3{^-}$ accumulation differences of outer sarcocarp vs. inner core parts in cucumber was increased along with the higher nitrogen levels, and its difference ratio of $NO_3{^-}$ accumulation reached 13.1:1 at 8g N/pot treatment. The highest $NO_3{^-}$ accumulation in edible parts of chinese cabbage, radish and cucumber were found at the 8g N/pot treatment, and were 3,664ppm in the outer leaf midrib of chinese cabbage, 3,449ppm in the aerial part of root of radish, and 484ppm in sarcocarp part of cucumber. Compared with the control each 130 times, 40.8 times, 20.9 times, respectively. There are positive correlation coefficients between the amount of nitrogen fertilization, $NO_3{^-}$ accumulation in the edible parts, yield, and yield components of edible parts.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.11
• /
• pp.477-482
• /
• 2005

We have investigated volume resistivity and thermal properties showed by changing the content of carbon black which is the component parts of semiconducting shield in underground power transmission cable. Specimens were made of sheet form with the nine of specimens for measurement. Volume resistivity of specimens was measured by volume resistivity meter after 10 minutes in the preheated oven of both 25$\pm$1[$^{\circ}C$] and 90$\pm$1[$^{\circ}C$]. And specific heat (Cp) and thermal conductivity were measured by Nano Flash Diffusivity and DSC (Differential Scanning Calorimetry). The measurement temperature ranges of specific heat using the BSC was from 20[$^{\circ}C$] to 60[$^{\circ}C$], and the heating rate was 1[$^{\circ}C$/min]. And the measurement temperatures of thermal conductivity using Nano Flash Diffusivity were both 25[$^{\circ}C$] and 55[$^{\circ}C$]. Volume resistivity was high according to an increment of the content of carbon black from these experimental results. And specific heat was decreased, while thermal conductivity was increased by an increment of the content of carbon black. And both specific heat and thermal conductivity were increased by heating rate because volume of materials was expanded according to rise in temperature.

• Natural Product Sciences
• /
• v.16 no.4
• /
• pp.259-264
• /
• 2010

The essential oil fraction was obtained from the underground parts o of Ligusticum chuanxiong (Umbelliferae) by steam distillation, and its main components, Z-ligustilide and butylidene phthalide, were isolated by column chromatography. Its essential oil fraction and the isolated main components were examined for effects on their anti-inflammatory properties in RAW 264.7 macrophage cells to develop a new natural anti-inflammatory drug. The results showed that the L. chuanxiong essential oil fraction and its main components, Z-ligustilide and butylidene phthalide, inhibited the production of nitric oxide significantly in lipopolysaccharide (LPS)-treated RAW 264.7 cells. LPS-induced interleukin-$1{\beta}$ (IL-$1{\beta}$), interleukin-6 (IL-6), and tumor necrosis factor-alpha (TNF-$\alpha$) production was also decreased in a dose-dependent manner. In addition, western blot analysis revealed that the L. chuanxiong essential oil fraction and also its main components, Z-ligustilide, and butylidene phthalide reduced the expression levels of cyclooxygenase-2 (COX-2) and inducible nitric oxide synthase (iNOS).

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.42-50
• /
• 2001

In this paper, the effects of scale formation in engine water jacket upon the thermal durability of engine itself and its component parts were studied. To understand the effect of quality of water, a full load engine endurance test for 50 hours was carried out with not-treated underground water. The followings were found through the tested engine inspection after the endurance test; 1-2 mm thick scale formation in the engine water jacket, valve seat wear, piston top land scuffing, piston pin stick, and cylinder bore scuffing in siamese area. In order to understand the causes of above test results, the heat rejection rate to coolant, the metal surface temperature of combustion chamber, and the oil and exhaust gas temperatures were measured and analyzed. The scale formed in the engine water jacket played a role as thermal insulator. The scale formed in the engine reduced the heat rejection rate to coolant and it caused to increase the metal surface temperature. The reduced heat rejection rate to coolant increased the heat rejection rate to oil and exhaust gas and increased the oil and exhaust gas temperature. Also, the reasons of valve seat wear, piston top land scuffing and cylinder bore scuffing, and piston pin stick quantitatively analyzed in this paper.

• Tunnel and Underground Space
• /
• v.12 no.3
• /
• pp.179-188
• /
• 2002

This study is to understand the effect of the vibration and the stress changes due to the excavation of 2 arch parts of a tunnel, which is a Gyungbu Express Railway tunnel, on the tunnel itself and adjacent slopes in advance, and to analyze the stability. For the estimation of ground conditions, borehole tests, borehole camera logging and seismic logging were performed. Ground properties at a specific location were determined as input constants by performing 2 dimensional analyses with possible ranges of uncertain ground properties. Static and pseudo-static (due to blasting vibration) factors of safety were calculated. The behavior of the tunnel and its vicinity due to the tunnel excavation were predicted by 3 dimensional analyses. It was also tested whether the support system was proper.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.803-812
• /
• 2008

Along with the increasing demand for automatic and mechanical tunnel excavation methods in Korea, the Tunnel Boring Machine (TBM) method of tunnel excavation has become increasingly popular. However, in spite of this rising demand, few studies have been performed on the TBM method, in Korea. For this reason, this study focused on evaluation of the applicability of TBM performance prediction models based on field data in order to contribute to the basic and essential parts of TBM designation and the TBM method of tunnel excavation in Korea. These rock properties can be defined as the mechanical and physical factors of rock that have an influence on a disc cutter's ability to cut rock, and provide information for the evaluation of the applicability of field data. Based on outcomes from these tests, applicability of the prediction model was evaluated and the predicted performance of a TBM was compared with real field data obtained from four different TBM construction sites in Korea.