• 한국터널지하공간학회 논문집
• /
• 제14권6호
• /
• pp.575-593
• /
• 2012

본 연구는 국제공동연구인 SKB Task 8에 대한 간단한 소개와 더불어, Task 8a 모델문제를 중심으로 유한차분과 유한체적법의 복합적 해석코드(integrated finite difference method)인 TOUGH2를 이용하여 벤토나이트 완충재와 현장암반의 수리학적 거동특성을 살펴보았다. 이를 위해 벤토나이트-암반의 상호작용을 중심으로 현장암반의 절리유무에 따른 완충재 내의 압력분포 변화 및 재포화 특성을 분석하였고, 벤토나이트 고유 특성인 높은 모세관 압력과 현장암반 내 절리영향을 TOUGH2 코드를 통해 성공적으로 구현하였다. 연구결과, 현장암반 내 절리를 고려함으로써 완충재의 포화속도는 약 2.5~12배 가량 차이가 발생하였으며, 무결암 및 절리암반 모두 완충재의 하단부가 상단부에 비해 포화속도가 상대적으로 빠르게 진행되었음을 확인할 수 있었다. 본 연구결과는 고준위폐기물 처분공 내의 완충재 설계와 관련하여, 완충재 포화 시기예측 및 최적 소요두께 결정 등에 중요한 자료로 활용될 수 있을 것으로 예상된다.

• 한국지반공학회논문집
• /
• 제22권9호
• /
• pp.61-68
• /
• 2006

최근 대규모 토목 건설 프로젝트는 용지 매입비용 및 각종 민원으로 인하여, 공유수면을 매립하거나 해안 및 하천지역의 용지를 활용하고 있다. 공유수면을 매립한 지반이나 해안 및 하천 지역의 지반은 충분한 지지력을 발휘하지 못하는 연약지반이 대부분이다. 이러한 연약지반은 주로 점토나 실트와 같은 미세한 입자의 흙이나 간극이 큰 유기질토 또는 이탄, 느슨한 모래 등으로 이루어진 토층으로 구성되어 있으며, 지하수위가 높기 때문에, 제체 및 구조물의 안정과 침하 문제를 발생시킬 수 있다. 본 연구에서는 지오컴포지트의 수리특성을 평가하기 위해 상재하중에 따른 통수성과 전수성 실내시험을 수행하였으며, 지하수위가 높은 지반에 지하구조물을 축조할 경우 발생될 수 있는 지하수 누수 및 양압력을 제거하기 위하여 토목섬유를 적용한 배수시스템을 연구하였다. 지반의 조건상 양압력으로 인한 문제점이 많이 발생되는 매립지의 준설토를 이용하여 실내배수실험을 수행하였다. 실내 배수실험에서는 실험기 하부에 토목섬유 배수층을 설치한 후에 상부에 준설토를 다져 넣고 상부에서 단계별 수압을 가하여 배수량과 간극수압을 측정하여 각각의 수압에 따른 계측값들과 이론적인 값들과 비교하였다. 실내배수실험의 타당성을 분석하기 위하여 흙이나 암석과 같은 다공질 재료의 간극수압 분포나 이동을 해석하기 위한 2차원 유한요소 해석프로그램을 이용하여 수치해석을 수행하여 실내실험의 결과와 비교하였다.

• 유통과학연구
• /
• 제17권4호
• /
• pp.77-85
• /
• 2019

Purpose - Statistics of Traditional Market is the only source of information on traditional markets, shopping street, and underground shopping street. The government conducts a survey of traditional market conditions every year to look at the current status of traditional markets and provide effective support. Therefore, this study examines the necessity and validity of updating about the Survey Population of Traditional Market Research design, data, and methodology - This study investigated the necessity of updating about the Survey Population of Traditional Market through literature review. Therefore this study examined the necessity of the current population based on the review of the population related to the sample design, methods, and the sampling frame. Next, we examined the change patterns of the population and the sample by dividing the population and sample of the current survey of the traditional market survey into the market unit, the store unit within the market, and finally the individual store unit. Results - As a result, the population of traditional market changes about 4~6%. Next, the analysis of the store unit in the market shows that the number of stores is very variable even though the market is continuously included in the survey target. Finally, as a result of examining the characteristics of individual stores, the stores with less than one year were more than 6% of the total surveyed stores based on the traditional market. These results are generally inconsistent with the idea that stores in traditional markets will operate for a long time in one place. Next, we proposed the establishment of a management system, applying Citizen Generated Data, and circulation survey. Additionally, this study proposes to change the stratification variables at the regional level rather than the market unit. Conclusions - Therefore, in this study, it is suggested that a current population of traditional market is needed updating, and that a population survey should be updated at least four years. In addition, a system for investigating traditional markets and districts was established and a circulation survey was proposed for efficient use of budgets. Based on these research results and policy suggestions, the future research directions are suggested.

• 터널과지하공간
• /
• 제26권2호
• /
• pp.120-130
• /
• 2016

노천광산에서 발파파쇄석의 입도예측에 널리 활용되고 있는 Kuz-Ram 모델의 국내 석회석 노천광산에 대한 적용성을 분석하기 위해, 강원도 동해지역 석회석 노천광산을 대상으로 총 21회의 현장 시험을 수행하였다. 현장시험결과와 Kuz-Ram 모델 예측의 비교 분석 결과, 평균 파쇄입도에서는 최대 56.45%, 균등계수에서는 최대 37.52%의 오차가 나타나는 등, 암석계수와 균등계수에 대한 다양한 보정요소를 제시함에도 불구하고 Kuz-Ram 모델의 예측값에는 상당한 수준의 오차가 발견되었다. 또한 동일한 벤치에서 유사한 발파패턴으로 시험발파를 수행했음에도 각기 다른 보정요소를 적용해야 하는 문제점도 도출되었다. 따라서 국내 노천광산의 발파패턴 및 암반조건과는 다른 경험값을 바탕으로 개발된 Kuz-Ram 모델의 국내 적용성 확대를 위해서는 반드시 해당 광산의 현장조건에 맞도록 수정, 보완되어야 할 것이다.

• 터널과지하공간
• /
• 제14권5호
• /
• pp.373-380
• /
• 2004

본 연구에서는 도로터널 환기시설 설계기준에 의한 소요환기량 산정 시 오염물질의 기준배출량을 환경부 고시기준에 대해 산정하여 차종별, 속도별로 산정된 기준배출량을 모델터널에 적용하여 시뮬레이션 한 결과 기존의 배출량 기준 적용에 대해 소요환기량은 약 49%로 감소되었다. 또한 터널 내 유동손실로서 작용하는 변수 중 터널마찰계수와 입구저항계수 및 등가저항면적을 통계적 분석기법을 이용하여 이들 계수 중 터널의 환기량 산정에 가장 민감하게 영향을 미치는 인자가 마찰계수이며 시뮬레이션을 통해 실제 적용 가능한 계수 범위가 0.018에서 0.021의 값으로 보정될 수 있을 것으로 예상된다. 검증사례로서 4개소의 터널에 적용하였을 때, 최대 약 19.2%의 소요환기량 감소가 예상되며 이에 대해 기존의 설계운용 중인 Jet Fan 설치 대수의 산정에 있어 감소될 수 있으며, 약 연간 운용비용의 저감에 적용 가능할 것으로 사료된다.

• 환경위생공학
• /
• 제8권2호
• /
• pp.25-48
• /
• 1993

International concern over the environmental pollution is ever increasing, and diversified countermeasures must be devised in Korea also. Global trend, damages, problems and countermeasures with respect to issues mentioned in the Rio Declaration, such as prevention of ozone layer destruction, reduction of migratory atmospheric pollution between neighboring countries, and prevention of global greenhouse effect, were discussed in this report. Conclusion of the report is summarized as follows : A. Measurement, Planning and Monitoring (1) Development and implementation of a global network for measurement and monitoring from the global aspects such factors as related to acid rain(Pioneer substances, pH, sulfate, nitrate), effect of global temperature(Air temperature, $CO_2$, $CH_4$, CFC, $N_2O$) and destruction of ozone layer($CFC_S$). (2) Establishment of network system via satellite monitoring movement of regional air mass, damage on the ozone layer and ground temperature distribution. B. Elucidation of Present State (1) Improvement and development of devices for carbon circulation capable of accurately forecasting input and output of carbon. (2) Developmental research on chemical reactions of greenhouse gas in the air. (3) Improvement and development of global circulation model(GCM) C. Impact Assessment Impact assessment on ecosystem, human body, agriculture, floodgate, land use, coastal ecology, industries, etc. D. Preventive Measures and Technology Development (1) Development and consumption of new energy (2) Development of new technology for removal of pioneer substances (3) Development of substitute matter for $CFC_S$ (4) Improvement of agriculture and forestry means to prevent the destruction of ozone layer and the greenhouse effect of the globe (5) Improvement of housing to prevent the destruction of ozone layer and the greenhouse effect of the globe (6) Development of new technology for probing underground water (7) Preservation of forest (8) Biomass 5. Policy Development (1) Development of strategy model (2) Development of long term forecast model (3) Development of penalty charge effect and expense evaluation methods (4) Feasibility study on regulations By establishing the above mentioned measures for environmentally sound and sustainable development to establish the right to live for humankind and to preserve the one and only earth.

• 설비공학논문집
• /
• 제26권9호
• /
• pp.401-408
• /
• 2014

This paper proposes an optimum operation method for open type ground heat exchangers. A series of TRTs and artificial heating/cooling operations were carried out while monitoring temperature in the hole of SCW. The ground temperature naturally increases with depth, but a switch between the cooling/heating mode results in a change in the distribution of ground temperature. The effect of the mode change was evaluated by performing LMTD and COMSOL multiphysics analysis for a reduced model with the depth of 150 m. As a result, in the cooling mode, the upstream operation is more efficient than the downstream operation and reduces EWT by $2.26^{\circ}C$. On the other hand, in the heating mode, the downstream operation is advantageous over the upstream operation and increases EWT by $3.19^{\circ}C$. The merit of the optimum operation will be enhanced for the typical dimension of SCW with a depth of 400~500 m. In the future, an open type ground heat exchanger system adopting the optimum operation with variation in the ground temperature will be used in practice.

• 한국환경과학회지
• /
• 제15권11호
• /
• pp.1011-1016
• /
• 2006

Recently, volatile organic compound(VOC) has been noted as a main cause of air pollution. VOC, with its toxic and offensive odor, is hazardous to health. Furthermore indoor, underground and hish-rise buildings are preferable living spaces. People spend more than 80% of the day indoor, so indoor air pollution is a matter of importance. In Korea, from 2004, 10 types of indoor pollutants in public facilities have been identified. However, there is no standard for individual VOC, so the regulation has not yet effectively been carried out. In this study, we have studied on the diffusion of Benzene in a room using a numerical analysis for various air-controlled conditions consisted of door, window and ventilation system. This study investigates spatial concentration distribution and time-history of room-averaged benzene concentration for several cases. The results of this study show that when the room is ventilated by a small fan only for 30 minutes, the average concentration of benzene is decreased a very little, thus the impact to human body would be serious compared to the case of natural ventilation by window and door, In the case of natural ventilation by window and door, if the wind speed is higher than 0.5m/s, it takes small than 4 minutes for benzene to spread to the target concentration of $1.2mg/m^3$.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권9호
• /
• pp.389-400
• /
• 2020

A construction project is a designed product made up of labors, materials, and installations in the project positioned on the ground and may include the underground and ground section, and the section in water or on the water surface. It is a civil, industrial, transport, agricultural and rural development, infrastructure, or some other. A key phase in the life cycle of these construction projects is the implementation when building products are made directly with workers, equipment, materials, and managers. If there is a lack of management experience, information, and problem-solving solutions to tackle the risks faced by contractors, especially foreign ones, will fail in controlling the project's cost. This study was conducted with investigations, discussions, and evaluation of the factors that lead to cost overruns in the construction projects of international contractors in Vietnam. The principal component analysis (PCA) showed that those factors that influence cost overruns these construction projects fall into five general groups, including factors related to (i) the owners, (ii) the foreign contractors, (iii) the subcontractors and suppliers, (iv) state management, and (v) the project itself. Besides, the study proposes solutions to limit cost overruns in construction projects and improve the profitability of international contractors in Vietnam.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.464-472
• /
• 2016

This study applies the selective harmonic elimination (SHE) technique to design and operate a regulated AC/DC/AC power supply suitable for maritime military applications and underground trains. The input is a single 50/60 Hz AC voltage, and the output is a 400 Hz regulated voltage. The switching angles for a multi-level inverter and transformer turns ratio are determined to operate with special connected transformers with equal power ratings and produce an almost sinusoidal current. As a result of its capability of directly controlling harmonics, the SHE technique is applicable to apparatus with congenital immunity to specific harmonics, such as series-connected transformers, which are specially designed to equally share the total load power. In the present work, a single-phase 50/60 Hz input source is rectified via a semi-controlled bridge rectifier to control DC voltage levels and thereby regulate the output load voltage at a constant level. The DC-rectified voltage then supplies six single-phase quazi-square H-bridge inverters, each of which supplies the primary of a single-phase transformer. The secondaries of the six transformers are connected in series. Through off-line calculation, the switching angles of the six inverters and the turns ratios of the six transformers are designed to ensure equal power distribution for the transformers. The SHE technique is also employed to eliminate the higher-order harmonics of the output voltage. A digital implementation is carried out to determine the switching angles. Theoretical results are demonstrated, and a scaled-down experimental 600 VA prototype is built to verify the validity of the proposed system.