• 대한기계학회논문집A
• /
• 제29권3호
• /
• pp.439-446
• /
• 2005

The theoretical method is developed to investigate the vibration characteristics of the combined cylindrical shells with an annular plate joined to the shell at any arbitrary axial position. The structural rotational coupling between shell and plate is simulated using the rotational artificial spring. For the translational coupling, the continuity conditions for the displacements of shell and plate are used. For the uncoupled annular plate, the transverse motion is considered and the in-plane motions are not. And the additional transverse and in-plane motions of the coupled annular plate by shell deformation are considered in analysis. Theoretical formulations are based on Love's thin shell theory. The frequency equation of the combined shell with an annular plate is derived using the Rayleigh-Ritz approach. The effect of inner-to-outer radius ratio, axial position and thickness of annular plate on vibration characteristics of combined cylindrical shells is studied. To demonstrate the validity of present theoretical method, the finite element analysis is performed.

• 대한조선학회지
• /
• 제20권1호
• /
• pp.47-58
• /
• 1983

A study is made, in the framework of linear potential theory, to investigate the hydrodynamic characteristics of two-dimensional wave-energy absorbers as like the Salter's duck and an oscillating cam with Lewis-form section, which undergo uncoupled heaving and rolling motions in an incident linear gravity wave in deep water. Wave energy is supposed to be extracted by a linearly damped generator with an spring. Some well-known formulae in ship hydrodynamics such as Haskind-Newman relation and Bessho-Newman relation are utilized in forms of Kochin functions to derived expressions for efficiency, breaking effect and drift force of the absorber. Maximum ideal efficiency of 100% can be arrived at an prescribed tuning frequency. Coupling effect is also examined to assess the detrimental effect of sway on efficiency. From numerical calculations for both types of two-dimensional devices it may be concluded that a wave-energy absorber functions at the same time as a wave breaker and that the drift force acting on the device becomes smaller when it absorbs wave energy than as it oscillates freely. Finally the study is extended to an infinite array system, equivalent to a body in a canal, to show that all incident wave energy can be absorbed regardless of the absorber's size, only if the optimum space and the optimum condition of control are realized.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1998년도 지반조사위원회 봄 학술세미나
• /
• pp.37-46
• /
• 1998

Several researchers have developed a number of theoretical time factors to determine the coefficient of consolidation by biezocone excess pore water dissipation test in soft clay deposits. However, depending on the assumptions and analytical techniques, the estimated coefficient of consolidation could be in a considerably wide range even for a specific degree of consolidation. These solutions are obtained from an initial excess porewater pressure distribution which can be determined from. either the cavity expansion theory or the strain path method. The 야ssipation of the initial excess porelvater pressure has been usally simulated by means of linear-uncoupled consolidation analysis and then the dissipation curve is normalized by the initial excess porewater pressure for easy use. However. since there is no guidelines or rules on which method gives the best solution for obtaining the coefficient of consolidation from the dissipation curve, the final selection was only based on engineer's extrience and Judgements. Thus, such an arbitrary selection might be inappropriate for a specific site to characterize the consolidation behavior. In this paper, we reviewed various theoretical time factors and, based on this consideration, we mentioned needs for researches in selecting a specific solution that is compatible for Korean clays. Also we listed some source of errors that can be encountered in the procedure of dissipation analysis.

• 한국농공학회지
• /
• 제27권2호
• /
• pp.38-46
• /
• 1985

The reinforced concrete farm silos on the elastic foundatin are widely used in agricultural engineering because of their superior structural performance, economy and attractive appearance. Various methods for the analysis and design of farm silo, such as the analytical method, the finite difference method, and the finite element methods, can be used. But the analytical procedure can not be applied for the intricate conditions in practice. Therefore lately the finite element method has been become in the structural mechanics. In this paper, a method of finite element analysis for the cylindrical farm silo on ffness matrix for the elastic foundation governed by winkler's assumption. A complete computer programs have been developed in this paper can be applicable not only to the shell structures on elastic foundation but also to the arbitrary three dimensional structures. Assuming the small deflection theory, the membrane and plate bending behaviours of flat plate element can be assumed mutually uncoupled. In this case, the element has 5 degrees of freedom per node when defined in the local coordinate system. However, when the element properties are transformed to the global coordinates for assembly, the 6th degree of freedom should be considered. A problem arises in this procedure the resultant stiffness in the 6th degree of freedom at this node will be zero. But this singularity of the stiffness matrix can be eliminated easily by merely replacing the zero diagonal by dummy stiffness.

• Steel and Composite Structures
• /
• 제38권2호
• /
• pp.189-211
• /
• 2021

An analytical solution is presented to analyze the thermoelastoplastic response of a rotating thick-walled cylindrical pressure vessel made of functionally graded material (FGM). The analysis is based on Tresca's yield condition, its associated flow rule and linear strain hardening material behaviour. The uncoupled theory of thermoelasticity is used, and the plane strain condition is assumed. The material properties except for Poisson's ratio, are assumed to vary nonlinearly in the radial direction. Elastic, partially plastic, fully plastic, and residual stress states are investigated. The heat conduction equation for the one-dimensional problem in cylindrical coordinates is used to obtain temperature distribution in the vessel. It is assumed that the inner surface is exposed to an airstream and that the outer surface is exposed to a uniform heat flux. Tresca's yield criterion and its associated flow rule are used to formulate six different plastic regions for a linearly hardening condition. All these stages are studied in detail. It is shown that the thermoelastoplastic stress response of a rotating FGM pressure vessel is affected significantly by the nonhomogeneity of the material and temperature gradient. The results are validated with those of other researchers for appropriate values of the system parameters and excellent agreement is observed.

• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.145-154
• /
• 2003

본 연구에서는 정규압밀점토에서의 피에조 콘 소산시험시 측정된 초기 과잉간극수압을 팔면체 수직응력($\Delta{\sigma}_{oct}$)의 변화에 의해 발생하는 과잉간극수압($\Delta{u}_{oct}$)과 팔면체 전단응력($\Delta{\tau}_{oct},$)의 변화에 의해 발생하는 과잉간극수압($\Delta{u}_{shear}$)으로 구분할 수 있는 방법을 이용하여 초기 과잉간극수압 분포를 가정하고, 연속적인 구형 공동확장 이론과 축대칭 비혼합 선형 압밀이론에 근거한 유한차분법을 사용하여 과잉간극수압의 소산거동을 모사하였다. 이와 같은 방법에 의해 압밀계수를 가정하여 계산된 소산곡선이 실측된 소산곡선과 특정 소산도에서 일치하도록 반복 계산하는 시행착오법을 사용하여 압밀계수를 산정하는 방법을 제안하였다. 제안된 방법과 기존의 이론해를 루이지애나 주립대학교 모형 토조에서 수행된 소형 피에조 콘의 시험결과에 적용한 결과에 의하면 제안된 방법에 의해 산정된 압밀계수가 다른 이론해보다도 실내시험치와 유사한 것으로 나타났으며, 계측된 소산곡선과도 잘 일치하는 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제75권5호
• /
• pp.541-557
• /
• 2020

A novel family of controllable, dissipative structure-dependent integration methods is derived from an eigen-based theory, where the concept of the eigenmode can give a solid theoretical basis for the feasibility of this type of integration methods. In fact, the concepts of eigen-decomposition and modal superposition are involved in solving a multiple degree of freedom system. The total solution of a coupled equation of motion consists of each modal solution of the uncoupled equation of motion. Hence, an eigen-dependent integration method is proposed to solve each modal equation of motion and an approximate solution can be yielded via modal superposition with only the first few modes of interest for inertial problems. All the eigen-dependent integration methods combine to form a structure-dependent integration method. Some key assumptions and new techniques are combined to successfully develop this family of integration methods. In addition, this family of integration methods can be either explicitly or implicitly implemented. Except for stability property, both explicit and implicit implementations have almost the same numerical properties. An explicit implementation is more computationally efficient than for an implicit implementation since it can combine unconditional stability and explicit formulation simultaneously. As a result, an explicit implementation is preferred over an implicit implementation. This family of integration methods can have the same numerical properties as those of the WBZ-α method for linear elastic systems. Besides, its stability and accuracy performance for solving nonlinear systems is also almost the same as those of the WBZ-α method. It is evident from numerical experiments that an explicit implementation of this family of integration methods can save many computational efforts when compared to conventional implicit methods, such as the WBZ-α method.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1144-1154
• /
• 2008

In this paper, the behaviour of shell foundation was studied. In order to perform this study, three studies such as theoretical, numerical and experimental programs were performed. In the theoretical program, the general shallow foundation theories and failure mechanism developed by Terzaghi, Mayerhof and others were reviewed and compared. Based on the previous shallow foundation behaviour, the shell foundation theory was developed using the upper boundary theorem. In the numerical study, the 2 and 3 dimensional FEM simulations were carried out using an uncoupled-analysis approach. From the analysis results, the adequate depth of shell foundation was evaluated. It was also evaluated the bearing capacity according to the shell angle ($120^{\circ}$, $90^{\circ}$, $60^{\circ}$). In the experimental study, the laboratory model tests were carried out for five cases of different foundation shapes including the rectangular and circular foundation in order to verify the theoretical and nemerical study. According to the results of this study, the bearing capacity of shell foundation was theoretically about 15% larger than that of general foundation. However, in the model test, the bearing capacity of shell foundation was about 25 to 30% larger than that of general foundation. In the case of shell angle, the maximum bearing capacity of shell foundation shows when the shell angle of foundation was $60^{\circ}$. In addition, Even if the shell foundation has the various advantages compared with the general foundations as described above, the practical verifications in full scale size will be necessary to use in the field and will be helpful in the technical development of other special foundations.

• 한국지반공학회지:지반
• /
• 제13권4호
• /
• pp.95-108
• /
• 1997

피에조 콘의 소산시험을 이용한 정규 압밀 지반의 압밀계수 추정은 그간 많은 연구자들에 의하여 연구되어 왔으나 각 연구자들의 가정 사항과 해석 방법에 따라 특정한 압밀도에 대해서도 매우 넓은 범위의 이론적인 해들이 제시되어 왔다. 본 연구에서는 보다 현실적이면서 전 범위의 압밀도에 걸쳐서 일관성 있는 압밀계수를 구할 수 있도록 최적화 기법을 적용하였다. 콘 관입효과를 고려하기 위해 연속적인 구형 공동확장을 적용하므로써 이론적으로 얻어지는 간극수압의 분포와 관입 간극수압으로부터 초기 과잉간극수압의 분포를 결정하였으며 축대칭 선형비혼합 압밀이론을 사용하여 유발된 과잉간극수압의 소산효과를 모사하였다. 이와 같이 계산된 소산곡 선과 실제 계측된 소산곡선의 차이를 최소화시키기 위하여 비구속 최적화 알고리듬인 BFGS가 사용되었고 golden section 일차원 탐색법이 사용되었다. 검증 예제를 통하여 적용된 최적화 기법의 안정된 수렴성을 확인하였고 실제 예제에 적용함으로써 제안된 방법이 넓은 범위의 압밀도 범위에서 계측된 소산곡선과 잘 일치하는 압밀계수를 산정함으로써 매우 효과적임을 확인 할 수 있었다.

• 한국전자파학회논문지
• /
• 제9권5호
• /
• pp.603-613
• /
• 1998

위스퍼링 갤러리 모드가 동작하는 유전체 원판 공진기의 공진 특성은 모드를 여기시키기 위하여 원판 공진기 주위에 배치한 외부 회로에 의하여 영향올 받게 된다. 이러한 현상올 해석하기 위하여, 원판 공진기를 모드 결합이 일어나는 결합부와 결합이 일어나지 않는 비결합부로 나누어 해석하였다. 결합부에서는 원판올 정합회로로 임피던스 매칭한 후, 비평형 유전체 도파로의 결합 전송 방정식을 유도하였다. 결합 전송 방정식으로부터 결합 계수, 결합 전자계 분포, 전력의 이동량 및 모드 결합 현상을 고려한 공진 주파수를 계산하였다. 또한, 공진 특성에 관한 실험을 통하여, 공진 주파수의 계산치와 실험치 간의 오차가 약 1.28%이고 FSR의 경우 약 0.6%임을 알 수 있었다.