• 한국표면공학회지
• /
• 제34권5호
• /
• pp.465-474
• /
• 2001

Type 304SS coatings were performed at 200$\square$ onto AISI 1045 carbon steel substrate using unbalanced magnetron sputtering (UBMS) with an austenitic AISI 304 stainless steel (SS) target of 100mm diameter. The total deposition pressure in the active Ar gas was 2$\times$10$^{-3}$ Torr. Coatings were done at various target power densities and bias voltages. Chemical compositions of metallic elements of the coatings were measured by energy dispersive X-rays spectroscopy (EDS). The structure and the morphology of Type 304SS coatings were investigated by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM). Corrosion properties of the coated specimens were examined using electrochemical polarization measurements and electrochemical impedance spectroscopy in a deaerated 3.5% NaCl solution. The porosity rate was obtained from a comparison of the dc polarization resistance of the uncoated and coated substrates. Scratch adhesion testing was used to compare the critical loads for different coatings. XRD results showed that the sputtered films exhibit a ferritic b.c.c. $\alpha$-phase. Potentiodynamic polarization curves indicated that all samples had much higher corrosion potential and better corrosion resistance than the bare steel substrate. The corrosion performance increased with increasing power density and the adhesion was enhanced at the bias voltage of -50V. An improvement in the corrosion resistance can be obtained with a better coating adhesion. Finally, an optimized deposition condition for corrosion protection was found as $40W/cm^2$ and -50V.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2001년도 춘계학술발표회 초록집
• /
• pp.14-14
• /
• 2001

Nitride films such as TiN, CrN etc. deposited on glass by PVD processes have been developed for many industrial applications. These nitride films deposited on glass were widely used for not only decorative and optical coatings but also wear and corrosion resistance coatings employed as dies and molds made of glass for the example of lens forming molds. However, the major problem of nitride coatings on glass by PVD process is non-uniform film owing to pin-hole and micro crack. It is estimated that nonuniform coating is influenced by a different surface energy between metal nitrides and glass due to binding states. In this work, therefore, for the evaluation of nucleation and growth mechanism of nitride films on glass TiN and CrN film were synthesized on glass with various nitrogen partial pressure by unbalanced magnetron sputtering. Prior to deposition, for the examination of relationship between surface energy and film microstructure plasma pre-treatment process was carried out with various argon to hydrogen flow rate and substrate bias voltage, duty cycle and frequency by using pulsed DC power supply. Surface energy owing to the different plasma pre-treatment was calculated by the measurement of wetting angle and surface conditions of glass were investigated by X-ray Photoelectron Spectroscopy(XPS) and Atomic Force Microscope(AFM). The microstructure change of nitride films on glass with increase of film thickness were analyzed by X-Ray Diffraction(XRD) and Scanning Electron Microscopy(SEM).

• 한국세라믹학회지
• /
• 제54권6호
• /
• pp.511-517
• /
• 2017

With different working pressures and substrate biases, Cr-Al-N coatings were deposited by hybrid physical vapor deposition (PVD) method, consisting of unbalanced magnetron (UBM) sputtering and arc ion plating (AIP) processes. Cr and Al targets were used for the arc ion plating and the sputtering process, respectively. Phase analysis, and composition, binding energy, and microstructural analyses were performed using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and field emission scanning electron microscopy (FESEM), respectively. Surface droplet size of Cr-Al-N coatings was found to decrease with increasing substrate bias. A decrease of the deposition rate of Cr-Al-N films was expected due to the increase of substrate bias. The coatings were grown with textured CrN phase and (111), (200), and (220) planes. X-ray diffraction data show that all Cr-Al-N coatings shifted to lower diffraction angles due to the addition of Al. The XPS results were used to determine the $Cr_2N$, CrN, and (Cr,Al)N binding energies. The compositions of the Cr-Al-N films were measured by XPS to be Cr 23.2~36.9 at%, Al 30.1~40.3 at%, and N 31.3~38.6 at%.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2001년도 추계학술발표회 초록집
• /
• pp.35-35
• /
• 2001

agnesium Oxide (MgO) with a NaCI structure is well known to exhibit high secondary electron emission, excellent high temperature chemical stability, high thermal conductance and electrical insulating properties. For these reason MgO films have been widely used for a buffer layer of high $T_c$ superconducting and a protective layer for AC-plasma display panels to improve discharge characteristics and panel lifetime. Up to now MgO films have been synthesized by lE-beam evaporation, Molecular Beam Epitaxy (MBE) and Metalorganic Chemical Vapor Deposition (MOCVD), however there have been some limitations such as low film density and micro-cracks in films. Therefore magnetron sputtering process were emerged as predominant method to synthesis high density MgO films. In previous works, we designed and manufactured unbalanced magnetron source with high power density for the deposition of high quality MgO films. The magnetron discharges were sustained at the pressure of O.lmtorr with power density of $110W/\textrm{cm}^2$ and the maximum deposition rate was measured at $2.8\mu\textrm{m}/min$ for Cu films. In this study, the syntheses of MgO films were carried out by unbalanced magnetron sputtering with various $O_2$ partial pressure and specially target power densities, duty cycles and frequency using pulsed DC power supply. And also we investigated the plasma states with various $O_2$ partial pressure and pulsed DC conditions by Optical Emission Spectroscopy (OES). In order to confirm the relationships between plasma states and film properties such as microstructure and secondary electron emission coefficient were analyzed by X-Ray Diffraction(XRD), Transmission Electron Microscopy(TEM) and ${\gamma}-Focused$ Ion Beam (${\gamma}-FIB$).

• 한국정보통신학회논문지
• /
• 제23권5호
• /
• pp.574-580
• /
• 2019

기존의 에너지 효율적인 라우팅 프로토콜은 라우팅 메트릭 중 에너지에 높은 가중치를 적용하여 에너지 효율이 높은 경로에 노드가 집중되고 해당 경로의 에너지가 빠르게 고갈되는 문제가 발생한다. 이러한 무선 센서 네트워크의 불균형적인 에너지 소모는 네트워크의 분할 및 기능 상실을 야기하여 네트워크 수명을 감소시킨다. 따라서 본 논문에서는 무선 센서 네트워크의 불균형적인 에너지 소모를 해결하기 위해 링크 비용 기반 라우팅 프로토콜을 제안한다. 제안하는 라우팅 프로토콜은 네트워크 문제 상황에 따라 라우팅 메트릭의 가중치를 차등 적용하여 링크 비용을 산출하고 가장 낮은 값을 갖는 경로를 선정한다. 성능 분석 결과, 제안하는 라우팅 프로토콜이 기존 AODV 프로토콜 보다 네트워크 수명이 22%, 에너지 소모 표준편차가 2%, 데이터 수신율이 2% 향상되었음을 확인하였다.

• 한국산업융합학회 논문집
• /
• 제27권1호
• /
• pp.229-237
• /
• 2024

The logistics industry is converging with digital technology and growing into various logistics automation systems. However, inspection and loading/unloading, which are mainly performed in logistics work, depend on human resources, and the workforce is shrinking due to the decline in the productive population due to the low birth rate and aging. Although much research is being conducted on the development of automated logistics systems to solve these problems, there is a lack of research and development on load stacking stability, which has the potential to cause significant accidents. In this study, loading boxes with various sizes and positions of the center of gravity were set up, and a method for stacking that with high stability is presented. The size of the loading box is measured using a depth camera. The loading box's weight and center of gravity are measured and estimated by a developed device with four loadcells. The measurement error is measured through various repeated experiments and is corrected using the least squares method. The robot arm performs load stacking by determining the target position so that the centers of gravity of the loading boxes with unbalanced masses with a random sequence are transported in alignment. All processes were automated, and the results were verified by experimentally confirming load stacking stability.

• 한국사회복지학
• /
• 제68권3호
• /
• pp.51-71
• /
• 2016

이 연구의 목적은 한국을 포함한 OECD 주요국을 대상으로 사회구조적 요인, 복지제도, 노동시장 및 정치제도 등 독신모가구 빈곤의 국가 간 다양성에 영향을 끼치는 거시적 원인을 규명하는 것이다. 1981년부터 2012년 기간에 대해 불균형패널설계(unbalanced panel design)방법을 적용한 결합시계열회귀분석을 실시했다. 연구결과 독신모가구의 빈곤율은 국가 간 다양성이 현저했다. 1인당GDP는 빈곤위험감소에 기여하지 못했고, 여성고용율과 15세미만 아동비율은 빈곤위험을 증가시켰다. 전체사회복지지출, 아동에 대한 현금지출, 노조조직률, 정규직에 대한 고용보호, 비례대표선거제도, 누적좌파내각, 누적여성의석수는 독신모가구의 빈곤위험을 감소시키는 요인으로 나타났다. 한국은 경제성장 일변도와 노동시장유연화 위주의 탈빈곤전략에서 탈피해 보편적 복지제도, 아동에 대한 복지급여와 일-가정양립정책을 확대할 필요가 있다. 나아가 노조조직률향상과 고용보호확대 등 조정된 노동시장제도를 설계하고, 비례대표선거제도 등 합의제정치모델을 도입해 좌파정치세력과 여성의 정치적 대표성을 확립할 필요가 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.482_483
• /
• 2009

This paper presents a method of finding the optimal operating point minimizing a given objective function with 3 phase power flow equations and operational constraints, called 3 phase optimal power flow. 3 phase optimal power flow can provide operation and control strategies for the distribution systems with distributed generation assets, which might be frequently in unbalanced conditions assuming that high penetration rate of renewable energy sources in the systems. As the solution technique, this paper adopts a standard particle swarm optimization (PSO).

• 전기학회논문지
• /
• 제56권1호
• /
• pp.35-40
• /
• 2007

The one step type and two step type pole are used in distribution line. If the three phases are not balanced, the communication line can be damaged by induced voltage. This paper calculates the neutral current using KEPCO's distribution system model which is only composed by one step type pole. The used system model is modelled by using ATPDraw and the neutral current is calculated by using EMTP/MODELS. Many cases for abstracting the neutral current characteristics in KEPCO's distribution system are simulated and analyzed.

• 한국가정과교육학회지
• /
• 제11권1호
• /
• pp.59-72
• /
• 1999

The objectives of this study were to survey stress, eating behavior, and the influences of stress on eating behavior of high school boys and girls. The subjects of this study were 510 high school students(boys 240, girls 270) in Cheongju area. The questionaires were distributed to 510 students, self-evaluated and collected from Mar. 23 to Apr. 4, 1998. The results of this study were as follows： First, the third grade students of high school were suffering from many stress. The rate of such students was 33.9% of total students. Second, eating problems of students were unbalanced diet, irregular diet, omitting a meal. The most irregular meal was breakfast, especially girl students ate breakfast more irregular than boy students. Third, the higher the level of stress of stress of the students, the more eating problem existed. The more students met with stress, the more eating behavior was irregular in eating quantity. In conclusion, stress influences eating behavior of high school students negatively. Therefore, to improve eating behavior of students who are suffering from stress, the program on stress release and nutrition education should be developed and supplied to them.