• 한국추진공학회지
• /
• 제17권2호
• /
• pp.16-23
• /
• 2013

정상초음파장이 개재하는 메탄/공기 예혼합화염의 전파특성에 대한 당량비의 영향을 실험적 연구결과로 제시한다. 화염구조 가시화는 슐리렌 기법을 이용하였으며, 이미지 후처리를 통해 화염 전파 거동을 면밀히 관찰하였다. 정상초음파에 의한 화염 구조 변화가 연소반응을 촉진시켜 화염 전파속도를 증가시키는 것을 알 수 있었으며, 당량비가 증가할수록 정상초음파에 의한 화염전파속도의 증분은 감소하게 되고, 속도변화가 미미한 당량비 구간이 존재한다는 사실을 확인할 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제16권12호
• /
• pp.1652-1663
• /
• 2002

It is desirable to perform nondestructive evaluation to assess material properties and part homogeneity because manufacturing of carbon/carbon (C/C) composites requires complicated and costly processes. In this work several ultrasonic techniques were applied to carbon/carbon composites for the evaluation of spatial variations in material properties that are attributable to the manufacturing process. In a large carbon/carbon composite manufactured by chemical vapor infiltration (CVI) method, the spatial variation of ultrasonic velocity was measured and found to be consistent with the densification behavior in CVI process in order to increase the density of C/C composites. Ultrasonic velocity and attenuation depend on a density variation of materials. Low frequency through-transmission scans based on both amplitude and time-of-flight of the ultrasonic pulse were used for mapping out the material property inhomogeneity These results were compared with that obtained by dry-coupling ultrasonics. Pulse-echo C-scans was used to image near-surface material property anomalies such as the placement of spacers between disks during CVI. Also, optical micrograph had been examined on the surface of C/C composites using a destructive way.

• 조명전기설비학회논문지
• /
• 제27권12호
• /
• pp.38-43
• /
• 2013

In this paper, the location measurement method for the reliable location data using ultrasonic sensors is proposed for the dimming control of the LED flat lamp. The measurement errors depending on the reflection angle of the object have to be considered to obtain the reliable location data in the ultrasonic sensors. In the experiment, the cause of the measurement errors depending on reflection angle is analyzed and velocity change of ultrasonic wave depending on reflection angle is measured. And the location measurement method depending on velocity change of ultrasonic wave is proposed. From the results, the average absolute deviation of the x-coordinates was 1.47cm when the location measurement method was considered, and it was closer to the true values than the average absolute deviation of the x-coordinates which was 5.89cm without regard to the reflection angle.

• 센서학회지
• /
• 제22권4호
• /
• pp.292-296
• /
• 2013

The ultrasonic wind sensor that pass through the air, beating the delivery of ultrasonic wind speed increases or decreases by the physical characteristics of the wind speed and the direction of the sensor, the transmission and reception of ultrasonic time difference measured by a two-axis vector wind and wind speed measured by calculating a device that converts the digital signal is Anemometer and wind direction meteorological facilities management, management of the ship sail used for various purposes, including, but used the existing 3-cup (mechanical) anemometer wind rotor caused by mechanical wear parts replacement due to the short-term, the reliability of the product is low, parts replacement, and according to the characteristics caused the car, there is a problem in high maintenance costs. In addition, because the bearings use of the marine environment and the cryogenic environment was constrained. In this study, the excellent long-term reliability, using ultrasonic-type environment that is not constrained to produce wind anemometer located $90^{\circ}$ conformal road using four piezoelectric sensors were fabricated structures, the piezoelectric oscillator circuit produces a rash and receiving transmit and receive speeds the car through the two-axis vector calculation to measure wind velocity processor firmware programming, and its characteristics were tested.

• 조명전기설비학회논문지
• /
• 제19권8호
• /
• pp.122-130
• /
• 2005

롤-스크린의 조용한 동작을 위해 압전 초음파 모터를 사용하여 롤-스크린이 설계되었다. 롤-스크린에 사용된 초음파 모터를 구동하기 위하여, 디지털로 제어되는 구동회로가 PLD를 사용하여 설계되었다. 또한 롤-스크린의 위치와 속도를 측정하기 위하여 1회전 당 36펄스의 엔코더가 사용되었다. 이러한 저급 엔코더를 사용함에도 불구하고, 초음파 모터의 정밀한 속도제어를 위하여 새로운 제어 방법이 제안되었다. 제안된 방법은 가변 샘플링시간을 사용하고 있으며, 초음파모터가 가지는 초기 비선형 특성 문제를 보상하도록 하였다.

• 전자공학회논문지B
• /
• 제33B권3호
• /
• pp.38-46
• /
• 1996

In this paper, a multi-velocity log system which uses ultrasonic pulsed doppler signal is developed. The output of the system is the absoluted velcocity of the ship. By using digitral signal processing, we get the vector velocity which displays the ship's speed about fore, aft, port and starboard. And this system give us the information about depth. This multi-velocity system has a large merit that is bottom and water track velocity. In addition, this has the high accuracy and can measure the water-depth according to the deep mode. And the fish finder, echo sounder or docking system will be made by applying the speed log system.

• 비파괴검사학회지
• /
• 제11권2호
• /
• pp.22-31
• /
• 1991

Various types of ultrasonic techniques have been used for the estimation of compressive strength of concrete structures. However, conventional ultrasonic velocity method using only longitudial wave cannot be determined the compressive strength of concrete structures with accuracy. In this paper, by using the introduction of multiple parameter, e. g. velocity of shear wave, velocity of longitudinal wave, attenuation coefficient of shear wave, attenuation coefficient of longitudinal wave, combination condition, age and preservation method, multiple regression analysis method was applied to the determination of compressive strength of concrete structures. The experimental results show that velocity of shear wave can be estimated compressive strength of concrete with more accuracy compared with the velocity of longitudinal wave, accuracy of estimated error range of compressive strength of concrete structures can be enhanced within the range of ${\pm}$10% approximately.

• 대한의용생체공학회:의공학회지
• /
• 제20권1호
• /
• pp.91-97
• /
• 1999

본 논문에서는 기술적으로 실용화가 비교적 용이(容易)한 저주파대역에서, 뼈의 기계적인 성질을 계측하기 위한 진단법에 대하여 연구를 하고 있다. 종래의 연구에서는 여러 가지 문제점을 해결하고 보다 정확하게 뼈를 진단하기 위하여 초음파도플러법을 이용해서 In-vivo에서 측정하는 방법을 제안한다. 측정한 속도분포를 분포정수선로모델에 적용해 구해진 위상속도를 이용해서 종파의 전파속도를 구한다.

• 제어로봇시스템학회논문지
• /
• 제17권5호
• /
• pp.505-511
• /
• 2011

In this paper, we have developed an automatic velocity control system of a small-sized commercial treadmill (belt length of 1.2 m and width of 0.5 m) which is widely used at home and health centers. The control objective is to automatically adjust the treadmill velocity so that the subject's position is maintained within the track when the subject walks at a variable velocity. The subject's position with respect to a reference point is measured by a low-cost sonar sensor located on the back of the subject. Based on an encoder sensor measurement at the treadmill motor, a state feedback control algorithm with Kalman filter was implemented to determine the velocity of the treadmill. In order to reduce the unnatural inertia force felt by the subject, a predefined acceleration limit was applied, which generated smooth velocity trajectories. The experimental results demonstrate the effectiveness of the proposed method in providing successful velocity changes in response to variable velocity walking without causing significant inertia force to the subject. In the pilot study with three subjects, users could change their walking velocity easily and naturally with small deviations during slow, medium, and fast walking. The proposed automatic velocity control algorithm can potentially be applied to any locomotion interface in an economical way without having to use sophisticated and expensive sensors and larger treadmills.

• 비파괴검사학회지
• /
• 제19권2호
• /
• pp.118-128
• /
• 1999

초음파 비파괴검사와 관련하여 많은 측정 방법들이 사용되고 있으며, 전형적인 예로서 재료성질 결정, 미시구조 특성 평가, 결함의 탐상 등을 들 수 있다. 이러한 응용에서 속도와 감쇠계수는 가장 흔히 요구되는 초음파 측정 파라미터이다. 본 연구에서는 수침식 펄스 에코방법으로 속도 및 감쇠 측정을 위한 5가지 해석 알고리즘 (펄스 겹침법, 상호 상관법, Fourier 변환, Hilbert 변환, Wavelet 변환)을 소개하였다. 먼저 연속한 두 저면 반사파 사이의 시간지연 측정을 위하여 펄스 겹침법, 상호 상관법, Fourier 변환에 의한 위상 기울기법 및 Hilbert 변환법을 사용하였다. 주파수 의존위상/군속도와 감쇠계수는 Fourier 변환에 의한 위상 및 진폭 스펙트럼이 사용되었으며, 이와 더불어 시간-주파수 해석법인 wavelet 변환이 이용되었다. 사용된 시편은 분산을 무시할 수 있는 강판과 약한 분산성을 지닌 기공을 함유한 복합판재이다. 각 측정 알고리즘의 특성에 대해 논의하였으며 측정된 결과들을 서로 비교하였다.