• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.231-234
• /
• 1998

In this study, the wind-mill type ultrasonic motor was fabricated, and then resonant frequency and vibration velocity characteristics of the stator were measured. Brass metal was pressed with umbrella-type using metal mold, then slot of 4 kind was processed in each of thickness. Among sixteen's stators, resonant frequency on vibration velocity was decreased remarkably in stator of higher resonant point, but resonant frequency on vibration velocity wasn't almost changed at lower resonant point of stator. The thickener thickness of elastic body, vibration velocity was decreased. The more slot of elastic body, vibration velocity was increased Applied voltage was changed from 10$V_{max}$ to 100$V_{max}$. Maximum vibration velocity value was 2.0[m/s].

• 보존과학회지
• /
• 제34권2호
• /
• pp.97-106
• /
• 2018

회곽묘는 조선시대의 대표적인 묘제로서 당시 사회와 장례문화 이해에 중요한 자료이다. 궁리유적에서 발굴한 회곽묘를 제작방식에 따라 분류하여 초음파속도와 반발경도 측정을 통해 물성을 평가하였다. 층벽식으로 제작한 회곽묘의 강도는 측정방법에 따라 차이가 있다. 초음파속도와 반발경도를 통해 산출한 층벽식 회곽묘의 압축강도는 각각 4.0~355(평균 43.6) $kgf/cm^2$ 및 18.8~538(평균 245.2) $kgf/cm^2$의 범위를 보였다. 이 회곽묘는 발굴과 이장과정에서 벽체에 충격이 발생한 상태로, 벽체의 고유물성에 비해 낮은 초음파속도가 산출된 것으로 보인다. 반면 통벽식으로 제작한 회곽묘의 압축강도는 초음파속도 및 반발경도 측정방법에 따라 각각 5.7~793(평균 281.6) $kgf/cm^2$와 4.5~551(평균 172.4) $kgf/cm^2$로 나타났다. 이처럼 압축강도 값의 차이는 있지만 경향성이 유사한 것으로 보아, 초음파속도와 반발경도 측정을 통한 물성평가는 통벽식 회곽묘에서 더욱 효과적인 것으로 판단된다. 또한 측정면적이 작은 반발경도법이 초음파법보다 더욱 일정한 강도를 보였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.633-638
• /
• 2000

Ultrasonic applications for the enhancement of turbulence flow by using the PIV measurement were carried out according to the angle of the ultrasonic oscillator, materials of the reflector and each section when ultrasonic is reflected several times. Angles of the ultrasonic oscillator such as $30^{\circ},\;45^{\circ},\;60^{\circ},\;90^{\circ},\;120^{\circ},\;135^{\circ}$ and $150^{\circ}$ were selected, and turbulent intensities were compared at Reynolds No. 2,000 and 4,000. Materials of the reflector such as wood, acryl, iron and glass were selected, and time mean velocity vector and turbulent intensity were compared at Reynolds No. 4,000. The zone which was observed was selected from first section to fourth section when ultrasonic was reflected several times. Every data such as time mean velocity vector and time mean turbulent intensity which was obtained by PIV measurement was examined, compared and discussed at Reynolds No. 2,000 and 4,000 to know the degree of turbulence enhancement in each case.

• 한국음향학회지
• /
• 제29권2호
• /
• pp.91-96
• /
• 2010

본 연구에서는 식물의 씨로부터 착유하는 기존의 착유방법에 있어서 착유 효율의 한계를 개선하기 위하여 초음파를 이용한 부가 에너지의 적용 가능성을 실험적으로 확인 하였다.그 결과, 기존의 압착방식에 의한 착유 방식에 란주반형 트랜스듀서로부터 방사되는 초음파 진동에 의한 압력을 부가함으로써 기존의 단순압착 방식의 착유효율이 15 %인 경우 25 %로 증가하여 적지 않은 효율의 증가를 보였다. 초음파에 의한 부가 압력을 해석하기 위하여 착유시료의 음향임피던스 및 초음파 트랜스듀서의 전통속도를 측정하여 방사되는초음파의 음압진폭을 구한 결과 단순압착 정압의 약 2.8 %에 불과했으나 초음파 주기에 따른 양력의 변회는 착유효율증가에 매우 효율적임을 확인할 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.139-140
• /
• 2015

The purpose of this study was to evaluate existing compressive strength equation with concrete exposed to high temperature by ultrasonic pulse velocity. As the result, original compressive strength equation is proper only for compressive strength of normal concrete. Therefore, an accumulation of experimental database of concrete exposed to high temperature is necessary for proposal of new compressive strength equation.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.324-329
• /
• 2001

The destructive method is reliable and widely used for the estimation of material degradation but, it have time-consuming and a great difficulty in preparing specimens from in-service industrial facilities. Therefore, the estimation of degraded structural materials by nondestructive evaluation is strongly desired. In this paper, the use of guided wave was suggested for the evaluation of thermally damaged 2.25 Cr-lMo steel as an alternative way to compensate for limitations of fracture tests. The observation of microstructure variations of the material including carbide precipitation increase and spheroidization near grain boundary was conducted and the correlation with the guided wave features such as energy loss ratio and group velocity changes was investigated. Through this study, the feasibility of ultrasonic guided wave evaluation for thermally damaged materials was explored.

• Computers and Concrete
• /
• 제3권6호
• /
• pp.423-437
• /
• 2006

Stress wave propagation through concrete is simulated by finite element analysis. The concrete medium is modeled as a homogeneous material with smeared properties to investigate and establish the suitable finite element analysis method (explicit versus implicit) and analysis parameters (element size, and solution time increment) also suitable for rigorous investigation. In the next step, finite element analysis model of the medium is developed using a digital image processing technique, which distinguishes the mortar and aggregate phases of concrete. The mortar and aggregate phase topologies are, then, directly mapped to the finite element mesh to form a heterogeneous concrete model. The heterogeneous concrete model is then used to simulate wave propagation. The veracity of the model is demonstrated by evaluating the intrinsic parameters of nondestructive ultrasonic pulse velocity testing of concrete. Quantitative relationships between aggregate size and testing frequency for nondestructive testing are presented.

• 한국농공학회논문집
• /
• 제48권2호
• /
• pp.59-66
• /
• 2006

This study is performed to evaluate freezing and thawing properties of polypropylene fiber reinforced eco-concrete using soil, natural coarse aggregate, soil compound and polypropylene fiber. The mass loss ratio is decreased with increasing the content of natural coarse aggregate and soil compound, but it is increased with increasing the content of polypropylene fiber. The ultrasonic pulse velocity, dynamic modulus of elasticity and durability factor are increased with increasing the content of natural coarse aggregate and soil compound, but it is decreased with increasing the content of polypropylene fiber. The mass loss ratio, ultrasonic pulse velocity, dynamic modulus of elasticity and durability factor are $1.49{\sim}3.32%,\;1,870{\sim}2,465\;m/s,\;77X10^2{\sim}225X10^2\;MPa\;and\;84.6{\sim}92.8$ after freezing and thawing 300 cycles, respectively. These eco-concrete can be used for environment-friendly side walk and farm road.

• 대한전자공학회논문지
• /
• 제26권7호
• /
• pp.98-105
• /
• 1989

본 논문에서는 생체 조직을 정량화하기 위한 음속의 측정법을 제안하였다. 기존의 음속 측정법에서는 주파수 분산의 영향이 무시되고 있으나, 주파수 분산은 전파 지연에 영향을 미친다. 따라서 진폭 스펙트럼으로부터 최소 위상 스펙트럼을 유도하여 주파수 분산을 정량화하였으며, 주파수 분산을 제거하기 위한 신호 분해법을 제안하였다. 또한 컴퓨터 시뮬레이션을 통하여 제안된 이론의 유효성분을 확인하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.347-348
• /
• 2010

초음파 펄스 속도법은 기존 구조물에 손상을 주지 않고 콘크리트의 상태평가를 할 수 있다. 또한 상대적으로 간편하고, 경제적이며, 뛰어난 적용성 때문에 그 필요성이 증대되고 있다. 본 연구에서는 하중이력상태에 따른 콘크리트의 초음파 펄스 속도를 측정하여 그 결과를 분석하고 콘크리트 내부결함을 평가하였다.